2 items
Compare
Compare
All Features
Differing
VolmateSee Similar
Volmate Digital LCD Voltmeter Ammeter Ohmmeter Multimeter Volt AC DC Tester Meter - Volmate
dragonpadSee Similar
Dragonpad LCD Digital Ohm Volt Meter Ac Dc Voltmeter Multimeter - dragonpad

Side by Side Comparison of: Volmate vs dragonpad

Learn More
All Features
Differing
Learn More
Add to Whishlist
See Similar
Volmate http://ecx.images-amazon.com/images/I/51LPPpUnIsL._SL160_.jpg
Volmate Digital LCD Voltmeter Ammeter Ohmmeter Multimeter Volt AC DC Tester Meter - Volmate
Add to Whishlist
See Similar
dragonpad http://ecx.images-amazon.com/images/I/519eIWzULQL._SL160_.jpg
Dragonpad LCD Digital Ohm Volt Meter Ac Dc Voltmeter Multimeter - dragonpad
Rating info
eComparisons Score
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users
7.6
7.6
User Rating (Amazon)
User Rating (Amazon)

Five Star Reviews:

52%
Five Stars
January 18, 2017
works great
With little experience I can say it works great for me!
August 8, 2016
I have very little experience working with voltmeters and have no comparison to make but after watching youtube videos I can safely say it comes with all of the usual suspects as far as settings and testing ability and works just great for me!
You gotta Buy
April 19, 2016
it works and is so worth the money, like this thing is awesome for the price.
Had tester for two weeks works great no problems comes with a battery ready to use
February 4, 2016
Had tester for two weeks works great no problems comes with a battery ready to use. Seller emailed on ways to use and most common questions and answers.
A great meter for the price !
October 31, 2015
This was shipped promptly, and works fine.
49%
Great for the price.
August 7, 2017
Its no fluke meter but then again it is also not >$100. :) For basic function in a classroom it did the job cheaply and well and stood up to middle school abuse.
Five Stars
July 18, 2017
exactly what I wanted to replace my old outdated one. very accurate
A very good unit, worth having in any toolbox.
September 15, 2016
I've been using one as my main voltmeter for a year and a half now and it still works like a charm.It's reliable enough, and at the price it means I can bring it with me anywhere and I don't fear that I might loose it or have it stolen.The main usage I do is continuity checking, and the beeping feature is a must have. This one has it, not all the cheap units do so look closely.I use to to measure voltage on model railroads, either DC or AC, typically in the 12-20 V range. It proved to be accurate enough each time I've used it. All voltmeters have some degree of fluctuation in their measurement, this one is no exception and did not raise any red flags.The backlit function turned out to be very useful in many occasions. It's very readable in the dark.Note that there is no auto-range, which has never been an issue (AC has a 0-200 V range and DC has 2 / 20 / 200 V, etc.) The display will show "1" when it's out of range, and one needs to manually select another position. Not much a problem when measuring low-voltage DC or AC since I'd just pick up the right range upfront; auto-range is only occasionally useful when I need to figure out a resistance value without prior reference.Two lead wires (black and red) came with it. I did like the thin pointy tips of the provided leads, it was convenient. However after 6 months or so the wire broke inside the tip head on both of them. I just swapped them for other leads I have from another multimeter since I have a couple other ones around. The banana plugs are compatible and the tips worked with my aligator clips.In summary, this is better than I expected and lasts longer than I imagined. I like the small form factor, the simplicity and robustness. I often carry it around with me because at that price I don't care if I loose it, and ironically I end up using it much more than my more expensive multimeters!
Great multi-meter for the price with only one shortcoming in my opinion.
December 22, 2015
After loosing my job and having to part with my prized Fluke multi-meter, I still needed something to work on projects with. Since I was on a virtually non-existent budget, I was pleased to come across the Dragonpad multi-meter. I ordered it for a very low price and a few days later it was in my hands.The build quality is pretty fair. There is a rubber grommet of sorts that covers the back and the sides, just like many of the Fluke meters have. It has all the standard features you would expect. Pretty much anything a normal hobbyist or tinkerer would ever need. It's pretty accurate from what I can tell. It comes with two leads that feel a little cheap but they do work.The one thing I was disappointed about was the internal "speaker" or "buzzer" (whatever its called). It's doesn't output steadily when testing for closed circuits and what not. It sounds like it struggles to make sound. It's not a deal breaker, more of an annoyance.For the price, you can go wrong.
Good Product/Price
November 29, 2015
Purchased meter to test batteries and other household items. Works as it is intended. Nice product at a nice price. Id recommend to others. Shipping takes a while though, so expect a couple week wait if in USA. Worthwhile for the Price.
Not a Fluke, BUT ...
July 12, 2013
Is it a Fluke? No.Could it be mistaken for a Fluke? No.Is there any chance it was made in the same factory as a Fluke? No.Would I trust its 600V rating? Not given a choice!BUT...Does it work? Yes.Is it cheap? Yes, very.Is it reasonably accurate? Certainly seems to be, based on quick comparisons with other meters.I got this meter to audition it. I need to get at least 10 identical units for as little cash as possible. So far, I'm thinking this is a pretty good choice. The case doesn't snap closed properly on one of the top corners but the bumper protects it well. The test leads are not the greatest but they will probably need to be replaced periodically anyway due to normal wear and tear in an environment with kids. The circuit board is really not too bad. It came in a box with an English instruction/specification leaflet (including detailed accuracy figures for the different ranges). The rotary selector has a good feel and the 20Vdc range is 3 clicks left of OFF, same as my other meters. Initially I was a bit concerned that it reported the gain of a 2N3904 about 35% higher than another meter, but it turned out to be closer to the true value than the other instrument! Long story short: aside from the fact that it smells somewhat reminiscent of a child's paddling pool, this seems to be a pretty solid contender in the cheap multimeter category.PS I wouldn't put too much stock in the negative reviews as their authors don't seem to be familiar with multimeters in general. You will always see small fluctuating voltages when the probes are floating because ... there are small fluctuating voltages. A "1" in the display indicates the value is out of range. There is no 'infinity' indication on any meter when measuring resistance, just an out-of-range indication. Of course the resistance will change rapidly from a lot to almost zero when you touch the probes together! And the person whose meter 'died' as soon as he tried to measure a battery voltage most likely had a current range selected, thereby blowing the fuse (I'm guessing he connected the battery first then rotated the selector through a current range to get to a voltage range. This is a downside of not having separate terminals for current and voltage input). Watch a video online if you need to get up to speed with how these things work.PS I should add that my meter was branded 'EXCEL' and was shipped from the US by 'Etekcity'. One of the problems with Amazon is that when different sellers list the same item, they aren't always the same, yet the reviews are common to all of them. I went to order more of these and they only had two remaining. Hopefully more will be in stock soon.

Four Star Reviews:

17%
Good value for money. Useful back light.
December 11, 2016
Does a fine job for the price. The back light is useful. I was a little taken aback by the resistance showing a "1" for overload when the resistance was higher than the range. My old inexpensive meter (now dead) would auto range rather than 'OL'. It saved switching ranges. I'll get used to it.
Would be nice (I think) if the Hold button would show Max value attained (min for resistance). I have only two hands, and that would be more useful for those hard to get to places.
Fantastic Multimeter for the price.
November 27, 2016
I purchased an extra set of wires listening to the reviews on here and the wires lasted me 4 months of daily heavy use before I finally broke the ground wire. Here's the problem, the cap is not glued in place and when you wedge it in something tight and it grabs hold of the tip it pulls the tip right out. They also glue the wire in place on just one end so when the tip comes out the wire pulls off. The repair took me less than two minuites. I simply cut the wire back and tinned it. I then cleaned the glue and soldered the wires on. Then I glued the cap in place and back to work. If you pull the tip when you first get it and glue it in place and you will get years of service from it. It's pretty accurate and has a backlight. My coworker has a $100 meter and I checked mine with his and we were getting basically the same readings. I am only giving it four stars because of the wire but it's truly minimal.
Good cheap multi meter
August 26, 2016
Good cheap multi meter, Has done what it should. Had to replace the probes about a week ago but I've been using it for almost a year.
not bad
July 4, 2016
Works great.

update: 08/14/2016

test leads feel apart, glad i had extras, otherwise works.
Great meter even with bad leads I'd recommend to anyone
January 21, 2016
The leads are very low quality, but i had some from my fluke that died. The meter it's self is great i was surprised by the rubber case with stand i didn't expect it. The back light and hold button are nice features. .. I've had a $900 fluke and i accept this as a replacement not counting the accessories the only feature i miss is the auto detect. If the leads were better i would give 5 stars. .. the ground lead made a very bad connection, i repaired it and the positive for backups. All in all money well spent.
19%
Excellent performance-to-cost
August 10, 2017
This is a great value for a basic digital multimeter. It handles most typical measurements very well, with accuracy as advertised. It even includes a slip-on cover (that's the orange/yellowish part in the picture) to help minimize the possibility damage if the device is dropped. I'd actually give this 5 stars for its excellent performance-to-cost, but I don't see how to open the device to replace the internal 9V battery when the time comes.
It is an excellent instrument, but this one does not works well
October 20, 2016
It is an excellent instrument, but this one does not works well. The display does not show the third digit completely. I least this one. I do not say all of this.
Adequate for basic electronic work.
December 26, 2015
There are several people on here telling you not to buy this meter since it is very cheaply made. Listen to them. They are right. I used $5 analog meters for years. I haven't seen an analog meter recently, but meters like this seems to have taken their place. But they seem to be less functional, and seem to be even less accurate.It will do for my purposes. But if you need accurate electronic measurements, then look for a better meter.I just said that it will do for my purposes. That may end up instead as me hoping that it will do for my purposes.Update Jan 9, 2016I have to apologize for the above information. I gave this meter an unfair review. I was using 3rd party leads with it, and evidently I was having a problem with the leads and not the meter. The meter is not 100 percent accurate, but it will get you close if you are using the leads which comes with it and not some bad ones as I had been when I 1st got it.And with continuity testing, the buzzer is below my hearing level....Update November 3, 2016In the comments, someone stated that this meter does not have a buzzer. I can only say that a buzzer is marked on the dial.
Works for me, despite the horror stories
February 14, 2015
I received this in the mail today, and, much to my relief, it seems to be working. The price is great, and messing with small electronics is a new hobby of mine, so I can hardly justify a larger investment in a tool like this until I understand circutry and electricity better (and start building my own circuts).The back-light seems to work, and is nice and bright, but you have to hold the button down for it to stay on for some reason. If you just press it, it stays on for a few seconds and then goes off (not long enough to get a reading)... so the only way I can see using the backlight is if I use the leads like chopsticks.I've tested it by measuring a 3.3VDC vin pin on a raspberry pi, and a few resistors on an arduino shield (from a kit) that I built. All the readings so far are reasonable and within expectation.I can't say anything about the quality control issues people have been talking about, but this is a really cheap meter that [in my case] seems to work. Hard to argue with that as an entry-level hobbyist.
Good meter, couple things though
September 24, 2013
I've had this meter for 6 months now. And overall I'm very happy with it, but there are a couple of things I should mention.Testing leads: I had the testing leads break on me. The end of the wire broke off from the inside of the casing on both leads within about a week of each other. While I'm not gentle with this thing nor am I particularly hard on it, so my conclusion is the cables that come with this thing are junk. But aside from that I've been so happy with it I just spent the $5 to get new banana plug leads. Search Amazon for "Amico 1000V Male Banana Plug Multimeter Probe Test Lead Cable Wire" if you want the exact ones I got. It might be prudent to get both together for when yours break.Hard to remove battery: This takes a 9V battery. There is no removable battery back or any such thing. You have to disassemble it to change the battery. It's just a few screws but still a hassle.Not idiot proof: I can't tell you how many times I've left this thing on overnight and through the next work day. That's on me for forgetting but it would be nice if it had some power down after some amount of inactivity feature. For the price though I suppose that's expecting a bit too much. Good news is the battery can take several days of this before it dies!Other than those things it's awesome. Way more features than you'd expect for the price tag. 4 stars easy. I'd give it 4.5 if that were an option.
Inexpensive full featured multimeter
September 29, 2011
The price is insane! I tested it along with my Fluke multimeter and found it well calibrated. It has almost all the features needed for home use. The test leads are a bit flaky(hence 4 stars), but at this price it is acceptable. The backlight is impressive and so is the readings hold feature. A rubber case is also included and fits well.

Three Star Reviews:

10%
Decent, but wished for something a bit better
November 2, 2016
looks decent, but the metal probes are loose and break off easy. I bought ten of them for a class. I had to re-solder them and glue the tips back in and I still have a little bit of problems with them. Also, I can't get the mA currents to work at least work well. I check the fuses and replaced them and they are not working or terribly inaccurate. In the 10A setting and plug, it does work decent.

Pros - Cheap, voltage works well, resistance works well, 10A current reading setting works well, the unit seems fairly well built

Cons- Probes are terribly cheap and poorly made, the mA current readings are terrible or don't work at all.
This made it useless for setting the timing on a points ignition
October 15, 2016
Worked okay for a while. The audible continuity tester has always had an irritatingly long delay. Even when tapping the probes directly together, you have to wait a couple seconds before the buzzer sounds. This made it useless for setting the timing on a points ignition, something I loved using my old multimeter for.

Anyway it's now getting less and less reliable to the point I can't trust it to diagnose problems. The backlight failed a long time ago. Now I'll measure a known, regulated 12V source and it'll fluctuate wildly between 16 and -5 volts. Sometimes it'll maintain a strange voltage reading when I remove the probes without activating the hold button. I need to diagnose a rectifier to see if it's over-charging a battery and it's going to be impossible until I get a new multimeter. All that said, it did provide service for a year or two. Casual users will probably have their needs met, but consider other options if you plan to use it often.
the probes are loosely glued in and fall off easily. It features a backlit display that lasts for ...
April 22, 2016
I don't think it is professional grade, but I really wouldn't know. I bought this little unit for a little over$8. My primary use is for checking the voltage for my batteries on a hydraulic setup. the probes are loosely glued in and fall off easily. It features a backlit display that lasts for about 10 seconds before slowly dimming out. I bought a second unit because I thought I lost the first one. On the second one I epoxied the area where the wires go into the insulation of the leads. Not bad for what I use it for.
Probes are cheap.
December 1, 2015
For the price you really can't go wrong. Just be prepared to replace or fix the probes. I've owned a lot of meters and this one works like a charm. I've been using it for about a month now and just yesterday I tried to use the continuity mode and like always I touched both probes together first and nothing happened. So I swapped the prove and it worked fine, the red probe then fell off. I soldered it back together and carried on. Just ten minutes ago the same thing happened to the other probe. Same fix, however I ended up using old probes. The wire seems to be awfully thin which isn't good for high current. That so far is my only complaint.
The blue back-light is nice, though I wish it would stay on a ...
November 16, 2015
Decent little voltmeter. The blue back-light is nice, though I wish it would stay on a bit longer. The only real complaint I had with it was the ground lead wiring to probe came off. It's not the end of the world, I just re-soldered it to the probe. Decent device, can't go wrong with it based on price.
10%
Looks nice in the picture
February 1, 2016
Looks nice in the picture, this is a LIGHT duty, low end meter. Dont use it for rated AC equipment.
Off by 0.15v, missing stands, no battery load test, no auto shutoff. OK but rather get the red centech one.
March 14, 2014
Positive: It's cheap, works ok for non-critical things, has a backlight and protective cover.Negatives:-One of two was off by +0.15v (although the reference was a cheapo red cen-tech unit).-two sellers, Dallas ImportDirect and LindaMomStore (both fulfilled by amazon) came with no stands.Neutral - would be nice to have:-auto shutoff.-battery load tester (cheapo red centech has it for $3-5)Conclusion: this and the cen-tech are both cheap and may be off, but they work ok for non-critical jobs so it's whatever feature you want to go with.TIP: hot glue both ends of each wire to the connectors, they tend to rip out first. Thanks and God bless!
Not great, but it pretty much works
December 29, 2013
What can you say? For the price, it's pretty decent. I ordered this because I couldn't find my good meter, but couldn't rationalize buying another ~$100 one (when I'd surely find it later).Out of curiosity, I disassembled the meter, and discovered, as expected, that this device was produced at pretty minimal cost. The fuse is soldered directly to the board, which is about as useful as just replacing a burned out resistor. I have added photos of the inner bits to the product description page.Overall, it's a decent meter, and good for most things around the house/car. It will get you a value which is probably correct. The backlight on it is actually superior to that on many of the more expensive meters that I've used.
Good Cheep Meter
December 4, 2013
The meter works fine. Don't expect anything fancy for the price have one of these already but it started acting goofy so I ordered another one as a spare. I do field service on Fire Alarm systems and my meters will occasionally fall hit the floor. I use cheep meters most of the time so when it does fall I don't lose a expensive meter, I break out the good one when necessary. The old meter started working properly the next day and has been fine since, not sure what the problem was but the voltage readings were way off from the actual voltage present. The test leads are not the best but they work. The delivery was awful, very slow from this vendor ordered 10/31 received 12/2.
LCD Multimeter - Not quite what I expected...
April 2, 2013
I'm an Electrical Engineering student and I figured that I would be needing one of these at some point in time, so I saw this and figured it would be a good buy.First of all, I did not expect to get a used product. The screen has tons of scratch marks. I don't really care, so long as it works. That being said, it does work. The continuity setting has a really annoying noise, not a clear beep, but kind of scratchy, like the speaker is broken... The plastic/rubber case on the back was clearly bought for a model without a kickstand, and you can clearly tell that the hole for the kickstand was cut by hand, and not very well. The packaging is a box with "DIGITAL MULTIMETER" written on it a few times. This is definitely not issued by the manufacturer. I got mine from "GNWE -- Ships From HONGKONG."It works, though it isn't the prettiest piece of equipment I've worked with. I feel kind of duped for getting a used product, though.
Best Voltmeter I have ever owned!
February 22, 2013
This is the best Voltmeter I have ever owned! I don't like to invest big bucks in items like this, so for the minimal cost this is indeed a fine unit! Large well lit screen and sturdy construction, I love it! I use it mostly to test batteries for wheelchairs etc. HOWEVER! As of June 15th 2013 one of the lead wires came undone from the probe and I don't see a way to repair it, so I must downgrade my opinion. Too bad because I like the unit otherwise.

Two Star Reviews:

6%
Broke down after 18 months
April 6, 2017
Worked fine when it arrived. After 18 months of just occasional use, kaput! Crazy readings on every position. Leads break down from stress where the wire meets the plug that you insert into the meter.
The rubber covering is nice to protect from abuse in a work belt or ...
October 18, 2016
Product Arrived DOA...
When I attach the leads to the VOM and turn it to any position, they start to get really hot within seconds. I have owned several VOM's over my 50 years. The one I received is internally wired wrong.
With that being said, I'm guessing most people don't receive a broken one. I feels well built enough. The rubber covering is nice to protect from abuse in a work belt or tool box. For $14, I'm not going to work very hard to return it.
I gave two stars instead of one, because I think a working unit is probably a good value. A broken one is not worth much. Good luck with yours.
The worst test leads in the history of the universe
June 19, 2016
I read other reviews that said the leads are junk. Correct! After a few weeks of very light, gentle use, the wire simply fell out of the black lead. Unbelievable.

Otherwise, for a cheapie, this doesn't seem bad. As far as this amateur hobbyist who doesn't know what he's doing can tell, it's reasonably accurate for a cheap multimeter. The transistor tester is even worse than the ordinary on these kinds of cheap multimeters. If I futz and futz and mutter and futz and *maybe* I'll get a reading but usually not. But measuring voltage, resistance and current, not bad. The continuity tester doesn't beep, seems to be broken.

Considering that there are other multimeters out there for about the same price whose leads don't fold like a house of cards, you can probably do better.
If you're considering this multimeter, keep looking...
June 3, 2016
Piece of crap. Red wire came disconnected inside the handle of the red probe, had to take it apart and solder it. No strain relief to capture the probe wires, so they get disconnected easily during normal use as you manipulate the probes. Occasionally gives totally unrealistic readings (like overvoltage on 20vDC scale when checking the voltage of a AA battery).
leads broke right away
October 26, 2015
I received this and one of the leads broke after the first use. It's soldered way up in the plastic and at this price point a new set of leads is basically the same price as a new VOM. So, basically, I've got nothing for my money.
5%
Does not work properly
December 29, 2016
 I took a chance at buying a multimeter for $11.00, and now I can see why it was $11.00.- Product had scuff marks in the rear of the case. Appeared to be a used item.- Turned on the multimeter, and for some reason, the LCD display appeared locked/frozen on the same numbers. Took me a while to realize that the "hold" button was depressed, thus freezing the LCD screen. (I did not press that button, it shipped that way.Problems:1. When the dial is set on 200V AC, numbers on the screen just bounce around. I don't even have the leads touching anything2. If I insert the leads into my 120AC outlet, the reading shows bizzarre numbers (0, or 13..etc)3. If I then switch the dial to 600V AC, the LCD screen reads correctly (122V)4. Continuity sound is very scratchy9V DC battery read correctly. Green backlight worked. Good protective cover.Look like someone previously returned it (broken), and it was never checked by the seller before sending to me.Returning it and will pay a little more and get something more reliable.
HOUSTON WE HAVE A PROBLEM .....!!
October 18, 2015
I bought this the end of 2014 & to be honest it worked like a charm. Was able to test any & all batteries from AAA to those round thin batteries in our bicycle speedometers. Then one day my husband left it on overnight & killed the battery. No problem, I thought, just remove the tiny screws & replace it. I got out my small eyeglass set of screwdrivers & then the fun began. The screws would not turn no matter what. I emailed customer service at Amazon but because I bought it from one of their vendors they could not help me. So now I'm forced to order another similar product. What a waste! Also disappointed that Amazon could or would not help me. So always make sure you turn the device off.
I had to return it, Save up for a better multimeter
June 1, 2015
Spend a little more money and get a decent multimeter. I purchased a craftsman multimeter at sear for a better price than this one. Right from the get go I was having problems. I'm pretty tech savy and I definitely know how to use a multimeter, but this was either giving me false readings or no readings at all. I promptly packed it up and returned it back to the seller:Pros:1) Price - 9/10 - For about $10 bucks you can't really complainCons:1) Build Quality - 5/10 - The craftsman ship and the attention to detail is sub-par. It sort of feels cheap when you hold it.2) Working Quality - 1/10 - Didn't work or gave me false readings.
Good value BUT Fuse is soldered to the PCB
August 22, 2014
TL;DR: I would say that if you're a parent who is considering getting a multimeter for a young kid who might lose interest in their electronic projects in a week or two, then go ahead and buy it. Or if you're a student who is on a really tight budget and you need a multimeter for a semester, then go ahead and buy it.For everyone else, spend a little more. (For example: $25 buys the Mastech MS8268 Auto/Manual Range Digital Multimeter Meter.)My in depth review.I would be giving this product 4 stars and possibly 5 just due to the fact that it's so inexpensive. ($7.59 when I bought it.) It does work, so for this kind of money, it's pretty hard to beat. HOWEVER, the big problem with this device is that they soldered the fuse directly to the PCB! What were they thinking?!? It might be possible to de-solder the fuse and re-solder a new one without destroying the thing, but that is extremely inconvenient. (Bring up all the reviews for this product and do a keyword search for "fuse" and you will see how common this complaint is.) Unfortunately I didn't see this while skimming the reviews or I never would have bought it.My unit came with the battery already installed which also seems like very poor quality control. Though it may just be the case that someone owned this unit before me and returned it. The packing is so generic you certainly wouldn't know if your unit was new or not.The backstand for the unit is very cheaply designed, but for the money, this isn't a surprise. The unit will stand up with the backstand extended, but it feels like it would break with very little pressure.When you unscrew the screws to get to the battery, the plastic screw holes feel like they are already stripped out. The back plastic covering doesn't feel like it's going to fall off or anything, but it does feel like it wouldn't hold up to being removed very many times.The LCD screen contrast isn't the greatest, but it's certainly good enough - especially for this price. It does have a nice back light that you can turn on. However, the back light turns off automatically after about 4 seconds and there's no way to force it to stay on.It's not all bad though by any means.In my basic testing, it seems to work (well enough for low voltage electronics anyway). I tested continuity a few times. It has a buzzer to indicate that there is continuity. However, the response time isn't instant. So if you were to drag the probe across a row of connections, you would likely miss anything that had continuity. The probe has to have contact for more than a fraction of a second to detect continuity. (Do a youtube search for "EEVblog #75 - Digital Multimeter Buying Guide for Beginners" to see why that can matter. Skip to the 12 minute mark and watch for 2 minutes.)One reviewer commented that the probes do not stay attached to the device. He said they were so loose that they fall out easily. This was not my experience. (You do have to push the probes all the way down - perhaps that reviewer only pushed them in half way?) With the probes pushed in all the way, I was easily able to dangle the entire weight of the multimeter just by holding onto the probe wires, so there's no way they are going to "fall out" from normal use.I tested a few batteries (with and without a load), and tested an AC to 9V DC power converter and the multimeter gave me accurate and consistent numbers for the voltage test.I tested some low current devices (100mA - 200mA) and got the expected results.Finally I tested a few resistors I had lying around and they too tested as expected.
An adequate cheap meter
June 22, 2014
I own a Fluke Scopemeter but needed a quick and easy to use meter for batteries and wall voltage. I found this cheap meter for the job. I don't care about accuracy, I just need a quick number. My only complaint is that the prop stand on the back is missing. I saw in the reviews where the same problem occurred. Not sure if all the prop stands are missing or I received the returned item from the previous complainer. The cost to drive to the UPS Store and return, would be the same price to order a new meter. I will keep, but I don't think I got what I paid for.
Great Meter, Junk for Probes
March 16, 2014
Probes came in with one tip off--no way to get probes due to second vendor or something along those lines--definitely spent too much time on e-mails and phone calls for this price. I couldn't justify buying probes at more cost than the meter . . . But I do really like the meter! Rate the meter a 4+ and the probes a 0 and the hassle of no real way to get a simple part a 1. All this said, Amazon was more than happy to refund or partial credit the product too.

One Star Reviews:

15%
This worked really well, and I used it for ...
July 21, 2017
This worked really well, and I used it for standard applications. Didn't get heavy usage by any means. Ended up getting one star because the wire pulled out of the probe and is not repairable. Should never have broke the way it did.
bad buy
April 21, 2017
This thing never worked. I tried everything I new how to do, batteries, cables, settings; I finally realized it was a bad unit. It's been long enough that I'm sure I'm out of luck. I'll keep digging to look for a way to contact seller.
Warning when purchasing
March 1, 2016
So I went to go test this out on my house outlet.when doing so it was working fine and when I went to go take out the black and red wire that metal tip for the black wire was left inside my outlet in my house

Sort of scary for somebody who doesn't know so much about electrical!! Lol
So I end up having this metal rod sticking out of my outlet not safe.

That's what I get for purchasing something so cheap and when you want to do something with electricity or something that uses voltages that I can take your life you should invest in something more expensive or more quality.
It looked promising...
January 19, 2016
1/19/2016

I bought this unit because it had a backlight and was cheap enough ($ 8.68) to be used as a disposable meter. The unit itself is solidly constructed and the switch makes some reassuring clicks when selecting the various functions. The protective yellow rubber shroud with the flip out stand is a little on the flimsy side but functions as intended.

Performance wise there was a -0.1VDC and -.8VAC difference when compared to my branded meter. What was really disappointing however was that switching the backlight on caused the DC voltage reading to increase by .03 - .05 volts when reading a 12VDC source and .5VAC when measuring a 120 VAC source. Also, when measuring AC on my unit the backlight sometimes flickered (even though the backlight was in fact switched off). I'm not sure if those issues were due to product defects or poor design.

In retrospect I probably wouldn't have bought this unit had I known about those circuit stability issues.

Update: 4/10/16

The positive probe broke after a few weeks of use.

The continuity function is now malfunctioning. Sometimes when I test a component and there's continuity, the audible alarm will sound and remain on even when the probes are removed from the component. The only way to stop it is to temporarily switch the unit onto another function and then back to continuity testing.

As a result of these new issues I am downgrading my original review from 2 stars to 1.
Test probles broke on first use in an outlet.
September 3, 2015
I've owned/used MANY expensive meters and cheapo ones (given to me for free). This is the first time that the probes fell apart upon use. I bought a discount meter when I was a poor college student going to school 20 years ago and it's actually my workhorse. I also have a large collection of $3-4 analog and digital multimeters that came "free" with purchase.

I just moved into a new house and cringed at the idea of buying YET ANOTHER meter, but I had to get some work done before the movers came. So I used Amazon Prime, got the meter quickly enough but ended up having to go to Lowes anyway to buy an overpriced but well constructed one.

Anyway, I'm returning it now.

I suppose I could have went somewhere to buy new probes that were compatible with this one. The only reason I hesitate is that if something so simple was so poorly constructed, it made me weary of the rest of the device. I also would have spent near the cost of the meter on replacements
probes. I also though about repairing it but that required additional tools that I already own that are in the moving truck.

I provided a pic. Remember, this is first time use in a receptacle. Nothing crazy here.
17%
Cheap Product
December 28, 2016
It worked fine when I first got it. Then put it on the shelf for about 6-8 months until I needed it again. Well, about 25% of the section of numbers don't show up and the digital screen, so you have no idea what number is being displayed. Of course, the warranty ran out just after 30 days. Junk!
Lack of fuses to protect over voltage measurement and lack response from seller
February 21, 2016
I bought two of them last year and both failed due to its not having a fuse to protect any over voltage measurement. When it failed, all AC/DC voltage/currents and resistance measurement failed. I have a regular meter I purchased 25 years ago and it has two fuses built-in to protect measurements that could be outside of ranges and it is the basic design feature for any meters to have but this particular meter does NOT have. Also the seller does not respond to request of manufacturer warranty info.I will NOT buy this one again, nor purchasing anything from this seller.
Doesn't work, poor quality
October 13, 2015
I bought this a year ago and never used it. Just took it out of the tool box today, and, like other reviews have indicated, it does not work (yes, i put in new batteries). Like other reviews, I too found it gets stuck on "1," and for me, it *never* did the job i needed it to do - it never read anything. I bought another meter at a hardware store today, and it worked perfectly...so this shows the unit on amazon was defective. Unfortunately i am out of my return window, so it is money wasted.
Doesn't function correctly. Quality is simply too low. ...
June 6, 2015
Doesn't function correctly. Quality is simply too low. I decided to risk buying, but the meter can't measure ohms reliably. The reading just continuously bounces around by 400% or more (I know multimeters and this is unuseable). I realized this was going to be a low quality device (plastic tab broke when checking the battery), but it doesn't even function correctly. So - don't risk it. Perhaps some of the other meters under $10 function correctly, but not this one. By the way, the seller would not exchange for free (ie they asked for shipping costs).
Dangerous item being sold
August 22, 2014
Bought this item for my husband. First issue: it did not come with the leads. Main issue: My husband just used it for the first time. It was arking (spelling ?) without anything being hooked to it. When he hooked it up to the device he needed to test, this multimeter blew the power out in my husband's office and the tv in our bedroom. Then, after disconnecting it, it was still giving reading with nothing attached to it. This item is dangerous. DO NOT BUY IT!
Did Not Work!
June 17, 2014
The fused side of this meter did not measure anything. Blown fuse. The fuse is soldered into the board. Does BrainyTrade check their equipment for operability prior to sale? No. I am a license prof eng. I do understand electrical measurement, even though I am an ME. My ex-wife got custody of my old meter (my problem). This was appeared to be a suitable replacement, just in case I needed one (like I did, to help a neighbor).I purchased the same meter from a different provider - it arrived yesterday and works just fine. @2 more, and worth every penny.I recommend the meter, but I would not recommend BrainyTrade to anyone. Sorry.
Vote for Me
Vote for Me
Pricing info
Old Price
Old Price
Price
Price
$11.75updated: Oct 22, 2017
from 3 sellers
$11.45updated: Oct 22, 2017
Features
Article Number
Article Number
0700819594782
0847977018535
Binding
Binding
Misc.
Tools & Home Improvement
Brand
Brand
Volmate
Dragonpad
Height
Height
78.7 in
78.7 in
Length
Length
236.2 in
232.3 in
Manufacturer
Manufacturer
Volmate
BrainyTrade
MPN
MPN
VOL-850L
TOOGOO
Number of Parts
Number of Parts
VOL-850L
TOOGOO
Product Group
Product Group
Home Improvement
BISS
Product Type
Product Type
TOOLS
PRECISION_MEASURING
Publisher
Publisher
Volmate
BrainyTrade
Quantity
Quantity
3
1
Reviews
Reviews
Score
Score
8.2
7.6
Studio
Studio
Volmate
BrainyTrade
Weight
Weight
2.2 oz
0.9 oz
Width
Width
157.5 in
161.4 in
Feature
Feature

Diode assembly test / Transistor P-N junction test/Transistor hFE test

Max AC Voltage Range: 600V Max DC Voltage Range: 600V Resistance Measurement: 200Ohm-2000K Ohm range

Max Display: 1999 Low Battery Indication: - /+ display Continuity test with buzzer sound in circuit.

Overload protection on all ranges. Sampling 2~3 times readings per second.

Package included: 1 x multimeter; 1 x manual; 2 x test leads; 1x 9V battery

LCD Digital Meter

AC DC Voltmeter

Multimeter

Voltmeter

LCD Digital Multimeter

Sorry, there's no review at this time. Try changing the filter or leaving one.
Share your opinion
User Rating
Post Review
Please enter captcha code
captcha
Send