Side by Side Comparison of: Custom Leathercraft vs Ironclad

I bought these gloves looking for an alternative to the price-ever-increasing/quality-ever-decreasing Mechanix Impact gloves I used to buy. These don't offer the rubber impact ribs on the fingers, but I don't need them for that. But you know what they do offer? Comfort, longevity, and washability. I like the synthetic material build along with the well-thought reinforcement patches in heavy wear areas, these patches actually being functional to protect softer material in heavy wear areas without being restrictive or limiting dexterity. I use these for general house projects, building, and yard work. AND, enjoy that I can just throw 'em in the wash along with my work clothes when I'm done, and hang up to dry after. They're a little warmer and less breathable than I'm used to, but other than that, zero complaints. Fit is pretty true to size, maybe a touch large in the hand body, but fingers, thumb, and webs are spot on. Good riddance Mechanix, Hello CLC!

Great fit. Breathable material. Durable material on the palms and finger tips (where it counts). Padding on knuckles is not needed, but does not hinder use. Back side of thumb is terry-cloth for wiping sweat from your eyes with either hand, a god-send!Better for daily use than any 5.11 glove I've used. Much better than what I've seen on the shelves at the local hardware store.I will buy another pair of these when I wear through them!

I have one pair of these gloves - I normally use them in my shop but lately have been wearing them while gardening so they are quite dirty and no longer suitable for handling clean boards, plywood, etc. So I just ordered a second set. As someone else posted I am able to pick up washers from a flat surface so tactile feel is good as well as protection. They seem durable.I highly recommend this glove.

I'm a hauler, I load a trailer full of misc junk part time. All in all my gloves see a fair amount of work, but nothing too insane, I'm 140lb for god sake. I went through every pair of FG(home depot brand) gloves in 2 weeks, I bought the toughest ones they had and wore through 3 pairs in 6 weeks.When I worked at HD in 06 we carried CLC and I have had a pair since then that I could never kill, until i lost them.I have had these gloves for 6 weeks now and I cant kill them, I've even washed them 3 times and they still look new, I will buy these again if I can ever wear them out.Thanks CLCUpdate, Just bought another pair, I have finally worn the stitches themselves off the grip pads and at some point i sliced through the side of one of the index fingers.The only problem I ran into with these gloves was funk, like glove funk from summer work, once you let the funk get in its hard to get out, I've probably washed my gloves 15+ times now, the problem is gone and my solution was to leave my gloves in the windshield to dry out. Ill try and wash them again and do a 6mo side by side photo.

I bought these gloves to wear while gardening. I like having gloves to protect my hands from blisters while raking, scrapes while scooping debris from the ground and punctures when picking up pine cones. If you're handling thorny rose bushes then you will want something with more protection. I can feel the thorns through the fabric of these gloves. Overall, they are really comfortable due to their flexibility and breathability. On top of that, I can maintain quite a bit of dexterity when handling outdoor power equipment. I've used them for about 40 hours of lawn work and they're holding up well. I'm really happy with these gloves.

I built a wrap around deck with sheet metal roof, I hold all screws with my left index finger and thumb while using a power drill in the right. As you can imagine I tear up most gloves daily. So I took and cut the thumb and index finger off some cheap leather farm gloves and duct taped them to my Mechanix gloves. It worked okay for awhile, but even that didn't last. Then I found these jewels, granted I can already notice some wear, but they aren't shrinking from sweat or tearing at the seams. I have already driven 400 hex headed, galvanized two inch deck screws, and 480 one inch with grommet sheet metal screws. The gloves still look new! Thank all of you for your reviews, Thanks to y'all I no longer have pieces of metal stuck in my thumb and index finger! I owe y'all one.UPDATE: still awesome, I have never had a glove this perfect. 4000 galvanized screws later, no wear, no tear. These are the best gloves I ever owned.UPDATE (12/20/2013): I lost count of the screws I put in, not 1 tear on the gloves. They are amazing, I did buy a second pair so just in case they run out of a good thing!

After five full working days of use, these gloves have exceeded expectations and passed all tests.I work with vehicle parts, and in wet, dirty, greasy conditions - all while using a scanner. They have not shown any wear, especially in the stitching, where other brands of gloves have failed miserably. I can also use the touch screen on the scanner while wearing these gloves. They dried fast after working in the rain this week. Good buy.

Good grip, ergonomic, flexible, soft on the inside. Okay for use in hot weather, but not insulated for winter (I used them in winter anyway with hot hands or other gloves). Fit well for a small woman's hands with the same quality as most large men's gloves, unlike a lot of sub-par protective equipment made for women or small sizes. Stand up well to washing and daily use. Protect well from the kind of sharp objects you typically come across in an abandoned building or construction site, including bits of glass and thorns. Also good for touching metal objects that have been out in the sun. You can manipulate the fingers easily for most grasping tasks, and you can still feel enough through them to know that you're grabbing what you want to grab if you're in a dark crawlspace or something. Touch screen use works occasionally, but not reliable (pretty much what I expect from any brand that makes that claim - the only protective gloves I would expect to really be touch screen compatible are those with removable finger tips). Water will eventually go through them, but if you accidentally put your hands on some snow or in a puddle, your hand won't get wet immediately.

These gloves are fantastic. I purchased these for walking my dog, a 165 lb Alaskan malamute that is hard to handle. I have found myself wearing these gloves for many other daily tasks, like taking out garbage, cleaning up in the yard and gardening. These gloves are especially good for trimming shrubs and rosebushes where you need flexibility and dexterity but you also need protection from injury also. These glove provide protection and provide easy maneuverability and flexibility. They have padding where needed and make daily task, especially walking my hard to handle dog, easier.

I've put these to the test. Working with sharp cans they weren't as sturdy as I wished but the touching sensation with these while making art are as good as I could wish for. They're are still my favorite gloves after about two months and that says something.Update November 2016:I still love these gloves. Picking apart pallets, making candle holders, spray painting, it all gets done wearing these. I work with sharp, rusty or rough material and they wear out quickly but last pretty long. I have three pairs and these are still my favorite. Tested more expensive ones for mechanics and woodworkers but non beat the comfort and flexibility of these.

I work as a landscaper and deal with varying kinds of equipment on a daily basis, for hours on end as well as pulling weeds that can have thorns.These are great at it all, they are thick enough to prevent most thorns from hitting me, while being thin and light enough that I can freely move my hand and fingers as if there were no glove to begin with.They are alright to keep your hands warm, but not great. I was extremely surprised as they were an absolute perfect fit, I couldn't have gotten closer unless I went to the store and spend 20 minutes trying on each size to find one to my liking.I love that they have a soft cloth both inside and out, so if you have an itch on your face it doesn't feel like rough or hard rubber scratching you, rather a gentle cloth, same with when you wear them, they feel quite soft and are easy to forget you even wear them.I have used them for about a week, and will update this review on how long they last before they begin to wear down.Overall, for the price they are superb!

I bought these to use while fishing (inshore salt water). My main reason (besides sun protection) was that while fishing my hands stay wet, which means they're more tender than normal and I don't feel the half finger gloves give me enough protection. Then when I get home, my hands are sore for days just from the sharp objects I encounter. Most fishing gloves have the fingertips missing. I wanted something that covered the whole hand and had some dexterity (if I need more, I can take one off). We do a lot of bay fishing where we pull up to a spot and drop anchor, so when we're done, I need the gloves to be tough to handle the anchor rope. I have used these twice since I purchases them and I love them. The synthetic leather seems to hold up well to the tough wet conditions. I don't have to worry about getting jabbed by hooks, bait and all the other sharp objects (pretty much everything) in the boat or bay. I wore them for a few hours and decided to take them off again to compare and I felt completely vulnerable and quickly put them back onUpdate 5/5/17 - after almost 2 seasons of saltwater fishing and a few hundred anchor pulls, they are still doing great! No ripped seams and surprisingly no holes at all! The biggest surprise is that the left thumb doesn't show signs of wear yet (when casting, the left thumb is on the spool to control the spin speed/cast distance). I included pics to show how they're holding up.

Good, breathable, affordable. Nothing special. Used it for a whole season of landscaping. Used with shovels, raking, picks, handling large rocks. Starting to get holes around the fingers from handling rock, but it got the job done. Wish it had wrap-around finger tip protection and sturdier stitching. The softer finger lining let it some thorns/pricklies. The sweat-wipe was a nice feature.

These are a pretty decent pair of gloves. I do a lot of construction/carpentry work, and I found that these gloves offered decent protection, but overall I was still getting a few splinters here and there with these gloves. If you're just doing basic DIY stuff at home, these will more than suffice, but if you actually make a living with your hands and need some proper protection, these gloves don't quite cut it as much as the Husqvarna Heavy Duty Leather gloves. They are literally the exact same price on Amazon, both pair of gloves go for $17.23 at the time of writing this review.I'd suggest grabbing the heavier duty Husqvarna's if you do any wood work and need some great protection for the hands. Otherwise, if you're just using these from time to time for various projects, I think these are a great pair of gloves for that purpose.You can get a pair here:https://www.amazon.com/Husqvarna-531030767-Heavy-Leather-Gloves/dp/B001CRLFCM

I have been using these gloves for over a month, with some pretty heavy usage. They hold up well, are comfortable, and protective with good flexibility and offering good dexterity for more fine tasks. I like the wrist strap for some tasks, but leave it undone for others. I would like the strap to be a little longer as the circumference of my wrist are such that the velcro strap would be better if it were longer. The reason that it gets a 4 star and not a 5 star is that the glove smells after you have been using it for a time; it breaths well (that is the good) but traps the odors. I washing them this week and they smell and look great.....just never felt a need to wash any other pair of gloves. Now they look like new again!

Average gloves. Nothing special. The mesh between the pads will allow stickers to penetrate. Fairly comfortable right out of the box, no break-in required.Update:After using these for a year, the right glove (right handed) is blown out. However, I have ordered another pair because I do like them.I use them for handling large (2-man) rocks, cutting timber, and using shovels and picks. Full leather gloves make my hands sweat, and these seem cooler.Greg

Love these gloves. I mainly use them for riding my bike, to give me some protection in case I wipe out, and to take a little chill off (don't buy them for warmth, though, they don't do much). They were tight at first, and stretched to fit my hand beautifully within a few hours of wearing them and they just keep getting better. I love the color, it is a nice dark brownish/rust orange, not a bright orange. Velcro wrist straps work great. Palm and finger tip padding is great. Padding on the knuckes does not quite line up properly, but that does not bother me much and does not affect comfort. I have not used them for work, but I suspect the extra layer of leather on the finger tips would affect tactile sense a bit. It is not a problem for my application. I think it would be fine for say, roofing, where you have to pick up roofing nails and screws...plenty of feel for that, but they would not work for a mechanic who has to be able to feel small parts. I wore them while working on a knife and it was nice to have an extra layer of protection just in case.

I used these gloves for moderate outdoors use, carrying wood, rocks, yard tools, and that is the most that should be done with them. For example, pulling vines from fences can wear them out as well as your fingers. Be advised they are not weatherproof. A hole was punctured into one when handling chain link fencing but in a month, the hole did not expand. Another tear was made at the cuff where I pull the glove onto my hand. They do fit comfortably, get on and off easily and quickly, and the padding is a benefit. This version has better protection than Custom Leathercraft's lower cost option, which would tear at the fingertips.

I ordered these gloves, Custom Leathercraft 125M Handyman Flex Grip Work Gloves, Medium, when I got a bucket pocket pouch, from the same makers. I like them for the fit and feel. I can wear them for quite a while, before having to remove them for a hand breather. They are snug, without being binding and are comfortable from the first time I pulled them on. The wrist closure is tight and is better than Velcro. I like them for four stars and my revisit this review and change it up or down as necessary.

Not a bad pair of gloves, I thought I might have finally found a glove that would last more than a couple weeks, and these have potential.I have gone through too many gloves wearing holes in them, trying to find a glove designed to last that would allow slipping for turning metal crank handles and gripping at other times as well as protection from busted knuckles and sharp metal edges and still allow the fine dexterity to use a pen, flip small switches and adjust small dial controls, etc., without having to constantly remove the gloves. I had high hopes for the reinforced fingertips, but the sides of the fingertips are not reinforced, they are part of the lycra panel sections, which ended up being the weak link for me. After about 2.5 months, two fingertips wore through on the side. Lasting 2.5 months is pretty good for me, but far short of where these gloves should have ended up, as it was looking like maybe a 6, maybe 8 month glove. The rest of the glove was holding up well, and was looking like I had finally found a glove that would hold up decently under wet, dry, hot, cold, or muddy/icy conditions. These gloves are also pretty comfortable, even before breaking in, though eventually some of the padding seemed to wear away inside and feel like dirt or sand had gotten into the fingers, but that wasn't a big deal to me, I was more interested in if the durability was going to be worthwhile.*** Note to Manufacturer: Wrap the fingertip reinforcement layer the whole way around the fingertip, covering the sides, and you would have a great glove. ***

The rating I gave this product is for poor description. I will revisit this post to comment on the durability of these gloves, but wanted to post here to inform buyers that there is padding sewn into the palms of these gloves. Nowhere I've seen in the product description or video does it indicate there is padding in this area. It only says padding on the knuckles. That is an important bit of information to me, because I did not want padding in the palms, only an extra layer of fabric reinforcement. Also, the gloves I got are black, not grey like the picture. I am going to keep the gloves anyway, since I've recently worn through both a pair of dewalt gloves and a pair of mechanix gloves in the last week and want to see what this brand is all about. For the price of these gloves compared to the apparent quality upon receiving it, I am already impressed. The economy gloves in this price range (like the dewalt) are much more basic than this glove, which has a much better contour to the hand and has elastic in the right places to give it great flexibility. We'll see how it holds up.

Good mild-duty gloves. Good for basic work outdoors in the yard or the garage. Great fit and good grip. Allows good dexterity and control. I wear these on the tractor, but slip into heavy leather gloves when doing something rough. Thee are fine when using tools, and prevent most of the scrapes and bumps that add up to sore hands. I use them a lot when stacking firewood, which eventually tears them up pretty good.They are not even close to weatherproof. Water will soak right through them, which is a feature on a hot day when you sweat. These are not winter gloves, though I wear them as liners in the winter under heavier gloves. On their own they will keep the worst of the cold bite from you for a few minutes, but the wind and cold will get through pretty fast. And if they get wet, you are in frostbite territory in minutes. My advice if you get these wet on a cold day is get them off fast.Overall, good gloves. I have burned through 3-4 pairs in the last 18 months (I do a lot of work). I came back to buy another one and am disappointed to see Amazon is selling the small size for more than the MSRP. The medium, large and extra-large are all below MSRP.What gives, Amazon?

Good: These gloves fit,.. Well.. Like a glove! The med fits like a dream. Very easy to see how they are the best selling glove on amazon. The padding is very handy. They are somewhat durable. Feel great and break in nice.Before the bad... I'm in excavation and that can be rough on gloves. Chains, shovels, hand tools, etc. Dirt is always a problem for gloves, and seems to find a way right through a couple of spots on these, along with the grease! I've used the basic unlined leather gloves for way to long and need something better. I'm extremely picky and particular when it come to gloves. After spending $80 on a pair of lined Carhart gloves that wore holes in the fingers after ONE Utah winter, I have lowered expectations for Any glove. It's very difficult to find a glove online that works well without getting 4 different ones and trying them on.Bad: the seams at the finger tips eventually get settled right under your fingernails and saw back and forth when you start to break them in. The padding wears down quick. Some of the stitches start ripping sooner than expected. They are a nice pair of gloves, just not up to excavator standards. If you're not in the dirt with heavy equipment all day they may be perfect for you.

I do a lot of outdoor work, including cutting firewood and making lumber with my bandsaw mill. For several years I just bought standard rough leather chore gloves from Lowes or Tractor Supply, usually 3 pair to a package. Went through a lot of gloves. Then I found a glove from Duluth Trading that I fell in love with. Went from using about 10-15 pair/year of the standard leather chore gloves to 2 pair/year of the DT brand. I should have bought more than I did because DT stopped selling them and now the equivalent glove from them doubled in price and they don't last as long either. So, went back to the standard leather chore gloves last year. Finally got around to really looking for a better alternative and ordered one pair of these to see how they'll do. Have had them two days, cut 20 logs into lumber and other than being dirty you'd think I just put them on as new. About this time I would have had seams opened and at least one or two holes in the standard chore glove if I put them on at the same time. I think I'll order a couple more pair just in case now and if they continue to hold up well I'll probably order a dozen more pair just in case Amazon stops selling them or the manufacturer stops making them.

Thinner that I had hoped. We'll see if they stand up to wear but by the look of it, I doubt it.

A tad disappointed with the color difference. They're a bit more brown than yellow. They do seem to be good quality so fingers crossed they hold up for the hubby!

First couple pairs of these i got lasted forever and a day through some heavy heavy use. The pair i got from amazon started falling apart within a few weeks of moderate everyday use. Love the fit of these but they don't hold up like my old pairs and for that they only get three stars. Good for very light use is all i can recommend

lasted one season, the fit was perfect

I want to like these more the fit good and are comfortable. But the stiching is coming apart. I have had these for about 6 months now but I only use them for when I ride my motorcycle. I did not ride much for the first couple months because it was cold still. I had an old pair from the same glove company and got 2 years out of them and they even held up to a 20 mph crash. So maybe these were just defective I don't know but I think I'll look for something different.

Ive had these for a few months now and they are holding up great. My only issue is the stink. I work out in the elements. It rained and that was it, the smell began. Washed them 3 times, and they still stink. I wash my hands everytime i take them off. Just beware of the stink.

First time purchasing this style/pair of gloves, and right off top you can tell these gloves are not designed for any type of strenuous labor. These gloves are what they state they are general purpose, meaning very light duty work.Like mowing the lawn, or if you drive a forklift at work. But if you pull orders, or work with abrasive material like stone, these gloves will not hold up.I'm giving it three stars because I ordered extra large gloves but for some reason these run smaller then stated size. So get the next size up or go with a different brand.

I just received these a few days ago so I haven't used them a lot. However, I can tell already these WILL not hold up to Heavy work or heavy gardening tasks. The finger are too long for my hands so some of the finer motor skills arent able to be accomplised. The palm and finger reinforcement are not that thick and show signs of wear after 3 to four days using them. I have purchased more durable/better fitting gloves at Walmart for alot less money.Four less money I have

I'm a package handler at UPS and I needed something better than the standard $1 gloves to keep my hands from getting sweaty. These are decent gloves, good at keeping my hands from getting sweaty. However, they lack good grip. I had to paint them with liquid plastic so boxes wouldn't slip out of my grip. They also only lasted 5 weeks of heavy use. If you don't need something that can grip cardboard or stand up to the stress of lifting boxes 4-5 hrs a night, then these would probably work for you. They are very comfortable.

Meh, these gloves weren't what I expected. I normally use Mechanix gloves for work but figured I'd change it up for once... shouldn't have. The "leather tipped" finger tips that allow you to use a touchscreen are nice and all but they easily rub right off. Also there really is no grip. They kinda do the job of any glove if it's something you can wrap your hands around like pipes or something with a definite edge to it. I do carpentry work and sometimes we have to lift laminated counters and hard walls and they slip right out of my hands. I have to take my gloves off and my sweaty hands work better. Take that with a grain of salt cause what doesn't work for me might work fine for you.

ATTENTION:PRODUCT HAS BEEN UPDATED as of approx 6/2015. Major decline in quality.I have purchased these multiple times.Look at the picture and you will see the older version side by side with the new version of this product.My 3 star review can be interpreted like this, The older version gets 5 stars while the newer version 0 stars.I CANNOT stress enough how much superior the older version of the 125 was compared to the newer version. Let me count the ways.1. Fit; the older version used an extra piece of material on the inside that was a gusset cut that went from the wrist to the webbing of the thumb. and stretch fit is no longer a feature and has been removed from the glove. Old- fits. like. a. GLOVE!, New- Uncomfortable, boxy fingers, very boxy finger tips, palm padding is unruly.2. Knuckle Padding; You can clearly see in my photo that the padding for the knuckles is now sparse and completely worthless in regards of knuckle protection.3. Palm Padding; The interior padding is sewn in with lazy stitching. This causes the palm padding to wad up and fold in ways that are not natural to the hand, which makes grasping a tool handle feel very obstructed with gaps and folds of the pad. The stitching of the older glove is much more precise and at the edge of the padding where the newer pad has much overflow (inside) and feels like the glove is falling apart already.4. Durability; All of the finger tips of the old style use leather coverings whereas only a few on newer style glove.The newer version touts "Touch Screen" as the reason for the improvement, meanwhile they have completely eroded the usefulness of these as WORK GLOVES. Also who in their right mind is going to touch a device's screen with dirty gloves on???Both version are made in China so it is hard to understand the product update since the product has not changed price one cent.Beware: This listing is for the newer style and not for those currently displayed.I had 100% converted from Mechanix brand after finding these, however, now with the revision I would go back to Mechanix if I hadn't stocked up on the old style of CLC 125 Handyman Gloves.

I use these work gloves all over the place in my everyday life. I use them for doing home improvement, and for working in the yard, but I specifically bought this pair for rock scrambling in the mountains. In the Sierra Nevada, there's a LOT of granite boulders, and when we are scrambling off-trail up mountains, your hands will be destroyed by the rough granite. These are very nice and pack down nicely into my pack. I really like the reinforced finger tips, and that's where other gloves start to rip. However, these are starting to fray, and I think after another season in the mountains, these will probably develop holes, just like the others. So I'm skeptical how long these will really last.Now I know 99% of people who are looking for these gloves are using them for this purpose, but my point is that the quality of them is decent, but not spectacular, If you are going to use these for general construction purposes, the gloves will be put to the same test.

I ordered these gloves this summer and used them for hand protection while I rode my ATV. The gloves were good looking, but unfortunately failed when i put them to work. I was using a rope pull start on a ATV towed brush mower, when the rope handle jerked back on a crank, the stitching in the palm went out like a cheap light bulb. Needless to say, now these will be retired and full leather gloves purchased in its place.

The concept of these gloves are great. They are tight fitting (but not too tight), have great padding, and allow me to have wonderful dexterity while working. They also have nice adjust ability with the velcro strap on the wrist, and don't over-heat your hands.The down side is they have really poor durability, which really disappointed me. I wore them for 4 days straight building a shed, so doing some light digging, running tractors, moving lumber, hammering, etc, and by the end of the 4th day (started brand new) I could see multiple places where the stitching was missing, and even a spot where I could see my finger through the glove. Really wished they held up better, but I guess on to the next brand to try and find a high dextarity glove.

Started to fall apart at the seams after a few short weeks. No abrasive work, just regular use.

the cuff starts ripping off these gloves the first time you put them on

Stitching sucks. Did not last more than 10 wears.

WTF! Why do these gloves use chemicals that can cause cancer??Here’s why: Vinyl chloride, the chemical used to make PVC, is a known human carcinogen, according to the World Health Organization’s International Agency for Research on Cancer (IARC). Workers in PVC manufacturing facilities and residents of surrounding communities are at risk from exposure to these chemicals which contaminate the water, soil and air around these facilities.The manufacture and incineration of PVC also creates and releases dioxins, which cause a wide range of health effects including cancer, birth defects, diabetes, learning and developmental delays, endometriosis, and immune system abnormalities. One type of dioxin is the most potent carcinogen ever tested. It’s nasty stuff.

This is my second pair of these gloves. The first ones lasted longer than a normal pair, and I really liked them. Very comfortable, padding in all the right places while still being flexible, work well while wet, dry quickly, easy to wash, etc. I would have rated them as FIVE STARS. But...I pulled these on yesterday to clean up after the hurricane and the wrist elastic ripped away from the upper part of the glove. I'm not Arnold Schwarzenegger. I have a desk job, so the ripping was not because I'm pulling on it unnaturally hard. Of course, this happened four days after the return window closed, so these are mine to keep. I guess I will be looking for a different maker the next time I buy work gloves.

Not what they used to be!! I've purchased these gloves for the past 5+ years. I just received a new pair and WOW, the company went cheap! The quality is nothing like it was before. Finger tips and thumb used to be quality leather, now it's a thin cheap fake leather. These used to be AWESOME quality gloves, now they're no better then any off the shelf Walmart glove. How disappointing!!

I purchased the same exact gloves (Custom Leathercraft 125M Handyman Flex Grip Work Gloves) one year ago. The were getting a bit worn but that is expected with age and use so I ordered another pair nearly one year to the date of the original order. The new pair that was sent seems like a cheap knock-off to the original pair. The 'new' gloves, in my opinion, seem to have significantly decreased protection then when compared to the 'originals' - at least on the bottom.The breathable fabric on the top and sides seems significantly thinner. Also, the overall quality of the protective fabric (synthetic leather) on the bottom of the hand seems significantly thinner. The fabrics used between my original purchase one year ago and today list that they are composed of the exact same 'ingredients' and while at first glance they look the same, they do not feel the same. The main rub for me is the 'synthetic leather' quality between the two gloves. The first pair just feels a lot more durable and stronger and definitely something I would put more faith in to protect my hands then the new pair.Disclaimer - Everything noted above is purely my opinion between the same glove but purchased one year a part. I'll still use the new pair I bought but with a bit of reluctance.

This is my first time reviewing an item but after only using these during 2 work shifts (working in an event setup/logistical field) and having the velcro separate from the glove, I was left pretty disappointed. I have to be able to velcro and un-velcro the gloves quickly while working and am unable to do so because I am afraid the velcro strip will now rip off entirely. The stitching that holds the velcro strip to the glove continues to loosen.

I've ordered several of these in past, they are some long lasting gloves. Dexterity is good, fit is good, finish is good. Wearing them for 10 hours a day I can get around 7-8 months out of them. I manage 3 warehouses so I need some good gloves when I need to step in and help out my workers. I received my latest pair with the touchscreen fingertips, which at first I thought was a plus. However, this new style lacks the stretch fit elastic on the thumb, and the Terry cloth wipe. After a week of light use, the finger tips were all but gone. It was simply a thin layer of synthetic leather on top. The gloves are still good, but touch screen capacity is gone.

I was very excited when I saw that these came in size 2XL. My Dad is 6'7" and has truly huge hands, so I ordered him a pair thinking finally we may have found something in his size. They were not even close to my idea of 2XL. I had also ordered a size L for my husband, and I ended up giving him the 2XL. He is about 6 foot and has a strong build to his hands, but I never in a million years would have thought to order him a 2XL. The L would have worked perfectly for me (if I stretch my hand wide, my thumb to pinky wingspan is 8.5", and my fingers are skinny.)The quality seems fine, but if you are on the tall end of the spectrum, I doubt these are for you.

Gloves fit well, but during their 1st use, the finger separated from the rest of the glove. Poor workmanship. Was moving rocks so needed to protect my hands. Will need to look for something else.

I originally purchased a XL pair of these gloves from a local hardware store for use while doing tree work and they lasted for several years of occasional use. They fit great and provided great protection. Eventually that first pair wore out and I decided to order another pair. I ordered the same size and got a mismatched pair one XL and one XXL. The XXL fit great but the XL that I ordered was a bit snug. Then after barely any use both gloves began to fall apart at the seams. I went back to using the first pair of gloves because even worn out they were holding up better than the new pair that just fell apart.

I bought these gloves for basic outdoor work (digging holes, trimming branches, cutting logs, etc). On the positive side they fit well, were reasonably comfortable and have good grip. However, after about 4 weeks of light use five of the fingers in the pair had split at the fingertip seams. I've had $5 gloves from harbor freight last 4 months at this level of use. Cannot recommend these gloves at all based of lack of quality and longevity.

UPDATE: 2nd pair they sent me split just like all the others.UPDATE: I returned the first pair to Amazon and they replaced them.Original Review: I ordered both a set of this 160L and the 125s to compare. The 160L is a better design with more rugged material and in more locations, however the workmanship of the pair I got was very poor. The sewing is not straight, and it goes too close to the edge of the material making a poor joint. In fact one of the knuckle pads is already fraying and it's never been used. Just tried them on to check the fit. The hook and loop strap has a much larger area for a more secure grip than the 125s, however again the sewing on this one is too far in from the edge and leaves a edge that's like a flap just waiting to snag on something.The 125's are much, much better sewn. The stitches are nearly perfectly placed and parallel to each other. The fit, cuts and finish are in every way superior to these slightly more expensive gloves. It could be a got a bad set but the 160's are going back and I'm keeping the 125s. I know with such poor stitching it's just a matter of time before a seam blows out and then I have a useless glove.160's are a better design, but that does not mean much if the glove comes apart prematurely.

This is the second pair of CLC gloves I have purchased. The first pair tore along the fingers. I liked them though as they were comfortable and nothing else bad happened to them since that.These new pair tore the moment I pulled them onto my hands. They fit nicely, they're comfortable, but they're not made very well in my opinion. They are also a little bit too bulky for me at my job. Perhaps they will work well for other people but not for me.Since they tore seconds into pulling them onto my hands, I have to give them 1 star. I wasn't rough with them, I didn't yank on them at a weird angle or anything, both hands tore in the same spot.

These Dam Gloves are not good. They keep unravel an the seams. The also run a little tight in size. I'm got going to purchase any more. All the damage happened putting them on to do some work.

These lasted about a month and a half. Worn daily for various tasks from rolling hose ( I'm a firefighter) to pulling and replacing snow stakes, light construction, tool maintenance mainly, the seams on the fingers started to go after the first 2 weeks. All the reinforcement and padding remains intact however 6 out of 10 of the fingers are now wrapped with tape. Pretty ridiculous for what they cost.If anyone knows a better glove PLEASE refer me , unless you are pulling weeds or petting the dog is pass these by

Poor quality gloves, 2 days of use and read disappeared reinforced finger tip, with 3 touch screen finger tips, making use of the mobile device easy. I want the return of my money

As everyone has said, previous model was much better. These ones are uncomfortable to wear on the long run, and aren't form fitting as the last model. Mine lasted me 3 years for the two pairs of last model. The new ones are already tearing and I've had them for TWO MONTHS. Lame.

Gloves ripped on second use. I unload trucks for a living and have yet to find a glove that holds up to unloading 1000+ boxes per truck. These gloves ripped just like another brand I bought in the same place near the finger. Guess I'll try resewing them if I can find a needle and thread. They do fit really well but if they're not durable what's the point? Also all of the grip on the fingertips is pretty much gone after second use they are now very slippery when trying to pick up boxes by the sides. If someone can recommend some lasting gloves for handing 1000+ box's a week please comment and let me know.

I was very excited when these gloves arrived. They fit my medium size hands perfectly. And they were comfortable. I purchased them specifically for a trip to Arkansas to mine for Quartz. The first area we located had a two hour maximum for collecting. This was the very first time ever I would be using my new gloves. Very disappointingly and in less than two hours the tip of the glove for my middle finger had a large hole. I am posting a picture of this also. Since these were the only gloves I brought with me on the trip I had to deal with the discomfort of dirt working its way in at two more collecting sites. I can't return the gloves to Amazon. But I would encourage everyone to look at what other gloves are on Amazon before considering these.

Beware these gloves do not come as pictured. I bought a pair before and they lasted a long time. After much use some holes appeared. I was over all happy with the longevity so I decided to buy then again. The pair that I received has what feels like fake leather on the tip in the pointer and middle fingers and the thumb. The padding on the palm feels stiffer. Overall the quality is not what it used to be.