Compare | ||
Compare All Features Differing |
Side by Side Comparison of: Neewer
Learn More | ||
Learn More | ||
Rating info | ||
eComparisons Score | ||
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users | 8.4 | 7 |
User Rating (Amazon) | ||
User Rating (Amazon) | ||
Five Star Reviews: | 59% Bought these specifically for my HTC Vive Base Stations. ... September 5, 2017 Bought these specifically for my HTC Vive Base Stations. I use these in conjunction with these: https://www.amazon.com/Tripod-Station-lighthouses-Camcorder-MDW/dp/B01M07M9D4/ref=sr_1_1?ie=UTF8&qid=1504647798&sr=8-1&keywords=2+Pcs+Tripod+Mini+Ball+Head+for+HTC+VIVEStands are lightweight so be careful they don't get knocked over while holding up the base stations. Well made. July 25, 2017 Very nice product. Not cheaply made. The adjustment knobs are holding up well. I'm using it for VR lighthouse. I have to adjust them often to move them out of the way. So far they are holding up well. The pipe is not too thin and the legs extend for great support. Highly recommend. Works well for Vive June 26, 2017 Another satisfied HTC Vive user. The two tripods are easy to transport and stable enough to do the job for the two Vive lighthouses. Remember to get the adapters to allow you to aim the lighthouses. This is the model I got which worked well.2 of EXMAX Tripod Mini Ball Head for DSLR Camera Camcorder Light Bracket Swivel 1/4" Screw including similar units like the Pet Cube January 30, 2017 I'm not really sure about big clunky cameras that everyone seems to be griping about here, but I got this for the described use of 'HTC Vive' and they work perfectly for the camera units, including similar units like the Pet Cube.If you're a gamer with an HTC Vive or have a similar small bottom mounting unit, and need stands that won't break the bank, these work awesome! If you're a professional photographer, I dunno, seems these made other photographers angry. You get what ya paid for when it comes to a professional job, I guess. ... for my HTC Vive base stations and they work great (as long as you also buy the Mini Ball ... September 19, 2016 Bought these for my HTC Vive base stations and they work great (as long as you also buy the Mini Ball heads separately Mini Ball Head . VONOTO 1/4" Screw Tripod Mini Ball Head for DSLR Camera Camcorder Light Bracket Swivel). I have them extended about 8ft high and have no problems at all unless someone walks right next to one and then there is a slight wobble of course but only lasts a few seconds. Great value, sturdy for the intended purpose June 13, 2016 Great value, sturdy for the intended purpose. We used these to prop up some lightweight dance lights (with the aid of wire and duct tape) and they held up very well indoors. I can't speak for use in wind. Do be gentle with them and understand how they work, never force this type of device to move. If you are forcing it something is wrong and you may bend the tubes and render the stand unusable. . Do watch out for fingers when loosening the screws because that tube drops fast if you're not holding onto it. Would buy again. | 25% |
Four Star Reviews: | 19% Bought to mount my Vive lighthouses on. They work ... February 11, 2017 Bought to mount my Vive lighthouses on. They work well for that application, and have a very small footprint, yet are stable. On slippery hardwood floors, you really have to crank the nut to keep the plastic ring the legs are attached to from sliding up the center pole. This is not an issue on carpeted or less-slippery floors.Note - you will need ball joint mounts such as these: https://www.amazon.com/dp/B01CQAQOSI/ref=sr_ph_1?ie=UTF8&qid=1486850828&sr=sr-1&keywords=akoak to mount the Vive lighthouses. Bought these for my vive lighthouses, they functioned adequately ... February 3, 2017 Bought these for my vive lighthouses, they functioned adequately in that regard. They're a little awkwardly shaped and wobbly, so I probably wouldn't use them for photography, but for vive lighthouses they are ideal. Works great. January 23, 2017 Honestly these are nice tripods. I initially got them to hold up my vive sensor bars before I mounted them to the ceiling, and they worked wonderfully; although a little shaky if not setup just right. very wide spread at bottom feet, which is good. August 22, 2016 I was expecting horrible flimsy stands, that you could topple over just by blowing on them. Instead these are quite light weight however they have a huge spread at the foot. The fact that the spread of the 3 legs is very wide, makes these stands quite hard to topple over.I also own about six PBL stands, which are much heavier and better built, however these neewer stands are not bad at all. These stands are little bit like "Target" "expect more and pay less". Great duo of stands for $25, if you're a strobist, these are excellent starters or supplements. November 26, 2015 Fantastic tall stands. Holds 48" modifiers no sweat. Holds multiple speedlites. Holds mild-weight strobes. A two pack for this price is a no-brainer. I use them outside and they're durable enough to be used like this and not be scrap in a week. Great for the price! September 8, 2014 I'd give this 5 stars, but the description heavy duty is a bit of a stretch. It's perfect to hold my LED lights. The build quality is on the low end, but for what I'm using it for and the price it's perfect. Get it, if you plan on using it to hold small LED lights. It's perfect for that. | 25% Great box, crappy lights. October 20, 2015 The photo box is great. It folds up flat which makes storing it super easy. I ordered this so I could do product photography, specifically wine bottle shots. The lights are crap and get super hot, and the tri-pod is super cheap. I can't say I'm surprised. This is all about the light box and the convenience in setting it up and taking it back down. It also appears to be made of material that should stand the test of time, and in that regards I was pleasantly surprised. |
Three Star Reviews: | 10% Good for my use, but poor quality build July 12, 2017 These are great for what I use them for. The issue I found though is they are very poorly built. Right out of the package one of the rings were cracked (still holds though) and one of the rivets are poking out like a nail (had to trim it off to keep from injury) Far from high quality, but a good price April 1, 2017 I bought 4 of these stands for general use in my home office (mainly for LED lighting for YouTube videos), and they just aren't very good. The legs don't even really close, the slightest amount of weight causes the center pole to push down, even when the legs are tightened as much as possible.If these could just manage to stand still and the legs tightened, I'd give them 5 stars based on the price but they couldn't pull that off. That being said it's still a dirt cheap stand that you can put something on, so for that it gets 3 stars they work just fine unless you have loose floor boards March 12, 2017 If you are buying these for the Vive, be warned, they work just fine unless you have loose floor boards. Any walking near them makes them shake. This shaking is horrible for VR as it sends your tracking haywire and can cause nausea. They seem to work fine if placed on stable ground; no squeaky floors or loose boards. In the end I chose to keep these in the event I need to take my Vive somewhere. I opted to use flexable go pro mounts for at home. Bought as Stands for HTC Vive Base Stations February 15, 2017 I bought these as stands for HTC Vive Base stations and I am somewhat disappointed with them. They work but 1 of the 2 has very uneven legs. I have read the other reviews before purchasing these and I thought I would be quite satisfied with them however seeing the issue with the set I got it seems like this company that makes these has a bit of a quality control issue. just plastic on ends nothing fancy would prefer like a rubber foot to keep it stable and reduce ... December 5, 2016 so DL. feet are alright. just plastic on ends nothing fancy would prefer like a rubber foot to keep it stable and reduce vibration. woud suggest something of the sort. to add to it.the plastic parts connecting to the pole will break upon first pull because there are rivets under them....bit of a flawed design but noting some super glue can't fix so i don't mind to much but it needs to be mentioned.Decent product though.holds up well other than that one thing but its fixed now. For 99% of cases it's fine, but if you are using it for a ... November 15, 2016 I got these for my vive; and I am still using them. I have to say though that you should probably look elsewhere if you are using them for your vive.The reason being that the tightener to keep the base legs narrow is badly designed and cannot really keep the feet stable on a narrow footprint.For 99% of cases it's fine, but if you are using it for a vive, then it is probably taking up part of the play area, and not being able to keep a narrow footprint stably is just annoying. They seem decently well built; are stable on a wide footprint, but on a narrow footprint they just slowly drift out of place because you can't really tighten it enough. | 25% Three Stars September 24, 2015 If I'm using it correctly, the included lights are way too weak to remove the shadows. other than that it works good and you need to put a white posterboard from ... July 23, 2015 I bought the 24x24 and the backdrops dont fully fit and have cracks in the back on the sides .. I need to go buy a bigger backdrop that fits in there and modify it... other than that it works good and you need to put a white posterboard from like office depot on the bottom cause the backdrop is a bit see through if you want fully clean shots |
Two Star Reviews: | 5% but the knob won't pick up so now it's now too loose to extend back up effectively making it useless. So this is a good bye if you ... August 23, 2017 Bought this to use on the Vive's lighthouses. It worked perfectly the first month! I'm giving it a 2 star because on the second month - I had to lower the height on one of them and I don't know what happened, but the knob won't pick up so now it's now too loose to extend back up effectively making it useless. So this is a good bye if you don't intend on moving the heights too much. Broke first time used August 22, 2017 Purchased these stands to use in my indoor studio. The first time I used them, one of the tripod legs snapped completely off. It was holding a reflector so nothing heavy. No fluid movement- did not come with a bag either so there was no where to really store these. Needless to say- I'm returning them. Legs wouldn't lock on one of them July 19, 2017 One of the stands will not lock on the bottom. The other one works well. But, hey, I needed 2. Returning this item. Good stand for HTC Vive Lighthouses but check for cracks on adjustment locks. June 20, 2017 Perfect stand for the Vive Lighthouses. Unfortunately one of the tripods I received has a crack on one of the length adjustment locks. I refuse to use the damaged stand for any expensive and sensitive equipment. I am attempting to contact the seller to see what can be done about this.If you intend to use this stand for the Vive Lighthouses you will need to purchase adjustable ball joints as well. The EXMAX mini adjustable joints are perfect for this. Vive review: A no go October 13, 2016 For my Vive base stations, these were too wobbly to even consider using them. I tried them, and it wasn't even an option. Way too much movement. OK but def cheap March 24, 2015 Very cheaply made. When product arrived, the top rods were both stuck due to faulty assembling, a few tools and ten minutes later I was fortunately able to solve that issue.The knobs are obviously plastic, but there is a fine line between having them tight enough, and too loose to the point they fall off the bolt, which is annoying.I have yet to use these much in my gear bag, but I feel like it won't take long for them to get scratched and bent out of shape to the point they are no longer usable.At least they do extend to 9', and they stand pretty solid with a 160LED video light mounted on top. | 25% I hand washed the inserts because the color bleeds bad. The lights get SUPER hot so be careful ... September 21, 2015 It arrived with one of the metal rods inside broken in half. They shipped it in a bag instead of a box. Also the fabric stinks, make sure you wash it before using, I hand washed the inserts because the color bleeds bad. The lights get SUPER hot so be careful not to burn yourself. I think the light box I made myself worked better but I wanted something more portable. The tri-pod is probably the best thing about this, no complaints on that so far. Great product, awful costumer service July 5, 2015 The product is as described. The box is great and so are the backdrops. The lights are just what you would hope for. The tripod is on the light side, so maybe adding some wight to it would make it better, but it is still quite useful.The head of the tripod came broken, though. We wrote to the seller and asked for a replacement (only of the head of the tripod, since the rest of the set was in good shape). Never heard from them. Had to eventually return the item, wasting time I don't really have. That is one way to ruin a great product with a mediocre costumer service. |
One Star Reviews: | 7% Unacceptable June 30, 2017 Top plastic tightener for the telescoper came cracked. This is unacceptable for a "new" product. Poor and weak December 2, 2016 If you going to be using it for softbox.. look for something else.. is really cheap made and really weak.. Cracked April 2, 2016 One of the two stands had one of the legs stuck in and the top part of the stand which extends upward was cracked. The other one seems fine. Cheap cheap. April 2, 2016 These things are very very cheaply made. On of them is pretty hard to tight the adjustment, I know they wont last much. Dont even think about putting some weight no them, I use them barely with speedlights. If you stretch them all long you will be afraid they will break! Flimsy. One of the stands broke five seconds after ... April 18, 2015 Flimsy. One of the stands broke five seconds after I took it out of the box. The plastic ring to adjust it just snapped, the very first time I tried to adjust it, and one component telescoped into the other and I couldn't get it back out. Returned them. Will be buying two tripods instead. completely useless. Tracking number never worked November 24, 2014 Item was broken upon receiving. All the joints were snapped, completely useless. Tracking number never worked. Lights are VERY flimsy! I only wanted it to hold up some video lights and they are not sturdy at all. Would not recommend, definitely look for other light stands unless you want something really unstable! | 0% There are no reviews yet |
Vote for Me | Vote for Me | |
Pricing info | ||
Old Price | ||
Old Price | - | - |
Price | ||
Price | $37.99updated: Mar 19, 2020 | $44.99updated: Mar 19, 2020 |
Features | ||
Article Number | ||
Article Number | 0804808439693 | 0804808276090 |
Binding | ||
Binding | Electronics | Electronics |
Brand | ||
Brand | Neewer | Neewer |
Height | ||
Height | 129.9 in | 196.8 in |
Length | ||
Length | 1393.7 in | 1023.6 in |
Manufacturer | ||
Manufacturer | Neewer | Neewer |
Model | ||
Model | 90079349 | 90079804 |
MPN | ||
MPN | 90079349 | 90079804 |
Number of Parts | ||
Number of Parts | 90079349 | 90079804 |
Product Group | ||
Product Group | Photography | Photography |
Product Type | ||
Product Type | CAMERA_OTHER_ACCESSORIES | CAMERA_OTHER_ACCESSORIES |
Publisher | ||
Publisher | Neewer | Neewer |
Quantity | ||
Quantity | 1 | 1 |
Release Date | ||
Release Date | 2014-08-28 | 2014-08-28 |
Reviews | ||
Reviews | ||
Score | ||
Score | 8.2 | 8.4 |
Studio | ||
Studio | Neewer | Neewer |
Weight | ||
Weight | 0.1 oz | 0.1 oz |
Width | ||
Width | 228.3 in | 1023.6 in |
Feature | ||
Feature | Folded height 3.18 feet Maximum height 8.53 feet Net weight per light stand 3 Lbs Max. load capacity 15 lbs Spigot 1/4 or 3/8 | Light tents work well with both film and digital cameras. Be sure to adjust lighting as needed Made of Fabric Softens and reflects lights for a perfect shot Eliminate glare 1 x 24 inch x 24 inch Photo Photography Tent Studio Light Box/Tent: 4 colors non reflective fabric background included (Red, Black, White, Blue) 2 x Photography Studio Photo Box Table Top Accent Light 1 x 42" Camera Camcorder Stand Tripod |
Neewer® Photography Photo Studio...
Neewer® Set of Two 9 feet...
Limostudio Photography Photo...
Linco_store 2000 W Photo Studio...
10ft Photo Studio Heavy Duty...
LimoStudio Photography...
Limostudio Photo Studio Umbrella...
Photography Photo Portrait...
CowboyStudio Table Top Photo...
LimoStudio 24" Table Top...