4 items
Compare
Compare
All Features
Differing
Danco
Danco 10062 Toilet Seat Bumper Kit, 4-Piece - Danco
SmarterFresh
SmarterFresh Brass Brushed Nickel Finish 3 Way Shut Off Valve Bidet Attachment, Three Way Metal T-Valve Adapter, On Off Valve for Tee Adapter - SmarterFresh
LUXE Bidet
Luxe Metal T-adapter with Shut-off Valve, 3-way Tee Connector, Chrome Finish, for Luxe Neo Bidets - LUXE Bidet
Lictin
Lictin 5 Pack Silicone Toilet Seat Bumpers for Most Brand and Model of Toilet Seat(white) - Lictin

Side by Side Comparison of: Danco vs SmarterFresh vs LUXE Bidet vs Lictin

Learn More
All Features
Differing
Learn More
Add to Whishlist
Danco https://images-na.ssl-images-amazon.com/images/I/31UdZanH0WL._SL160_.jpg
Danco 10062 Toilet Seat Bumper Kit, 4-Piece - Danco
Add to Whishlist
SmarterFresh https://images-na.ssl-images-amazon.com/images/I/418pH%2BYgFoL._SL160_.jpg
SmarterFresh Brass Brushed Nickel Finish 3 Way Shut Off Valve Bidet Attachment, Three Way Metal T-Valve Adapter, On Off Valve for Tee Adapter - SmarterFresh
Add to Whishlist
LUXE Bidet https://images-na.ssl-images-amazon.com/images/I/41y-82nBxTL._SL160_.jpg
Luxe Metal T-adapter with Shut-off Valve, 3-way Tee Connector, Chrome Finish, for Luxe Neo Bidets - LUXE Bidet
Add to Whishlist
Lictin https://images-na.ssl-images-amazon.com/images/I/316f-5cVESL._SL160_.jpg
Lictin 5 Pack Silicone Toilet Seat Bumpers for Most Brand and Model of Toilet Seat(white) - Lictin
Rating info
eComparisons Score
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users
6.4
9.2
7.6
5.8
User Rating (Amazon)
User Rating (Amazon)

Five Star Reviews:

36%
I bought this for my bidet. I haven't had ...
September 26, 2017
I bought this for my bidet. I haven't had any issues. We left it alone for 24 hours and I think that did the trick in terms of letting it set. Also, we just used the oblong ones, not the little dots
Small accessory makes all the difference!!
August 20, 2017
Definitely needed with the Luxe Bidet Neo 185. Once bidet is installed, toilet seat will be higher so these bumpers are applied to FLAT SURFACE of toilet seat and then it is level. If underside of toilet seat is not flat, you may need to change toilet seat. Well worth it.
Excellent product if you need a bumper
August 16, 2017
Strong 3M tape on the underside helps keep it in place. No noise or lid flexing when sitting on the toilet now. It seats the lid comfortably. Its use will depend on your toilet lid. This was a necessary add-on for one of your toilets when we installed the Luxe Bidet 180, but not for another toilet, which was by a different manufacturer and had a Luxe Bidet 120 installed on it.
As advertised perfect for application
August 6, 2017
theyre the perfect size for the bidet I installed, and is you dont have the controlled close lid like ours theyre a softer rubber and less likely to crack the seat having the 2 extra round ones add stability to front of seat for heavier people or if you install a bidet
Good to have around
June 22, 2017
glad these are available from Amazon. Made a bidet purchase and thought I would need it to level the seat after installation, but I did not. I am glad I had them on hand though. Will use them for another project.
I use " Loctite 1365882 20-Gram Bottle Liquid Professional Super Glue" glue two long and one round bumpers on ...
February 22, 2016
I use " Loctite 1365882 20-Gram Bottle Liquid Professional Super Glue" glue two long and one round bumpers on to the plastic seat. Use large size binder clips clip over for a night. Happily forever!
82%

There are no reviews yet

59%
Worked great, no issues!
September 27, 2017
Worked perfectly, no leaks or any issues. Some people asked if the valve shuts of the water to both ends, or just the one. The answer is it only shuts off water to the one directly across from it. See attached pictures showing it open and closed.
It Works Better than the Nylon Adapter
April 26, 2017
I just received the T adapter; the Luxe 120 nylon adapter is pretty fragile, but I did make it work after using some Teflon tale on the threads. It does work on my toilet. I love my bidet, but I will admit it took some adjustment to get it located in the right position. The nylon adapter leaked after but after I reconnected it with Teflon tape the leak stopped. I have pretty high water pressure here so flow shouldn't be a problem.I had zero leaks, saw no difference in water pressure and installed in less than 5 minutes.
This is a must if you buy a bidet..
April 16, 2017
Must buy this when you buy your Bidet. Well Worth It.. I'm a woman and it was very easy to put on I would say took me 5 minutes not even 3 minutes thank you again Amazon.. S.I.N.Y.LADYRIDER
I thought to make her happy, I would install it and have it working ...
January 20, 2017
On the second try, I installed the Neo Luxe Bidet unit, with the metal T-adapter, and this time it worked. Customer Service at "2 Go" were extremely nice. They kept trying and trying to help. They were always very nice, and as helpful as they could be.It appears that the supply line in the first one was faulty. I could not get it to stop leaking. After several tries, I gave them a bad review. I would like to correct that now, as the unit works as advertised, and doesn't leak.It seems to be a great bidet and my wife loves it.2Go was kind enough to give us a free replacement for our trouble. Thank you for great service and a great product!
high quality metal t adapter that can adjust the water flow or serve as a safety valve to shut off water flow to the bidet
May 24, 2016
The metal t adapter was bought for my bidet that I recently installed in my bathroom. It is definitely of higher quality than the plastic t adapter that was included.This unit enables me to adjust the levels or off completely for my bidet, so as to increase water flow or use as a safety attachment in case you have kids that may turn on the bidet unintentionally.The unit fits structurally onto the bidet, was easy to install, and keeps the water flowing with no leaks. Overall, I was very happy with the metal quality construction of the adapter and its performance.
Use This Instead of the Plastic T-adapter
November 4, 2015
When installing the Luxe Bidet, I highly recommend using this valve instead of the plastic T-adapter that comes with the bidet. The plastic adapter does not have a shut-off valve. The shut-off valve allows you to control water pressure to a much greater degree than the dial on the bidet control panel. The pressure in our home is not particularly strong, but we still find that we have to reduce it a good bit using the shut-off valve. Then the bidet control dial works well for fine adjustments day-to-day and user-to-user.
31%

There are no reviews yet

Four Star Reviews:

13%
Bumpers for your toilet.
October 22, 2017
Working well so far, though I agree with other reviews that the tape that comes with is not the greatest. They were also just a bit taller than the bumpers that were originally on the toilet seat. But, they definitely helped and for the price, they are worth it.
The bumpers are very good, however the sticky pads did not hold
June 5, 2017
The bumpers are very good, however the sticky pads did not hold. I replaced them with Contact Cement, and all is well. Well worth the money, if you use Contact Cement.
Other than the adhesive the company uses could be a bit better the product is good
May 12, 2017
One of the large bumpers came off shortly after putting them on and I'm guessing was flushed because I never found it. Other than the adhesive the company uses could be a bit better the product is good.
Sticky problem
March 10, 2017
Work great but the sticky backing that came with the product was not strong enough to hold in place - had to use glue. Size and shape are perfect for the new bidet.
Used these with a luxe bidet. I've already had ...
February 26, 2017
Used these with a luxe bidet. I've already had to fish them out of the toilet twice. Have some rubber cement or replacement adhesive tape ready to install them with.
I imagine they are perfect if you have a bidet
December 17, 2016
Ok, so to be fair, I bought these as weight displacement bumpers for a new toilet seat I purchased after my rather ample bottom snapped ours. They are a fraction of an inch higher than the default bumper on the seat. So the seat sticks up a little until weight is put on it. I imagine they are perfect if you have a bidet, to make up for the gap. I guess a bidet might be in my near future... all in all, my seat feels a lot more solid on the bowl now.
9%

There are no reviews yet

10%
Like the security of metal!
September 25, 2017
I like the idea of a metal T valve better than plastic so I ordered this along with my Luxe 120 bidet. The pressure adjuster might be more helpful for someone with stronger water pressure than I have. In my case, it's just the security of metal over plastic that benefits me.
Nice
August 31, 2017
I am giving this a 4 star because it did leak on my bidet from Luxe. But I gave it to a neighbor that needed it for something else so all is not lost. Luxe sent me another t-adaptor and it worked great. So I am set now thanks to them.
Works for the most part
July 28, 2016
After having a leak from installing our Luxe Bidets plastic adapter their customer service reached out to us and shipped us one of these. Leak is now fixed but I don't feel the pressure really was adjusted no matter which way it is turned. After a half hour of trying to fiddle with that and the toliet we decided to call it quits and just accept it as it is and we're just happy the leak was fixed.
Don't give up hope!
June 2, 2016
Like most people, my plastic adaptor was leaking a little bit so I decided to give this a go. This product, on the other hand, leaked like a geyser upon initial installation. After many attempts I rage quit and decided to try again the day after. I was convinced, like others that have written reviews, that this adaptor simply wasn't compatible with my plumbing hookup.Day 2: first few attempts were still failures. Not sure if it became a witching hour or full moon or whatever but on my last try before I pitched the whole thing, I was able to get the adaptor correctly hooked up. Where I was having issues was at the screw part directly on the toilet. Now, there's no leaks at all, and the bidet still works beautifully.
Contact Luxe Bidet Customer Care...
June 6, 2014
Although the premise of controlling the flow to the bidet without disturbing the flow to the toilet sounds great, the product leaks no matter what was tried.Looks like this is an ongoing issue with this product not working with the provided hoses. It leaks from the 15/16" threads. I tried plumbers tape... tried loosening, then tightening..re-seated it several times but the thing still leaked.Luckily the cheaper plastic T-connector (included with the LuxeBidet) works great and does not leak.I should have read more reviews on this product before ordering -- but live and learn.***UPDATE***After the customer support team received my email about my problems with the unit they immediately contacted me back and shipped a replacement. They are the best customer service people I have dealt with in recent years. Here was their explanation:"We will get this investigated right away. The T-adapters are working perfectly in 99% of the cases, however, a few complaints we had, we thought, were due to the black washer not being effective enough. In our newer shipment, we improved (thickened) the black washer.We will also look into your thought that it may be some incompatibility between the hose and the T-adapter. I have expedited the shipment of this T-adapter and you will get an email within 24 hours.If you feel that it is the hose, we will also reimburse for any expense that you may incur on purchasing a different hose. We will try our best to make sure that you get a working metal T-adapter for your bidet. We will also investigate this issue at our end. Feel free to contact us at anytime with any other questions or comments.Sincerely,AndyCustomer Care"They shipped a replacement T-adapter and it worked perfectly... no leaks.One recommendation, just hand tighten the adapter and hoses... any extra torque appeared to foster leaking.
Really like being able to adjust the pressure
April 18, 2014
My toilet does not have a shut-off valve and I have not been able to loosen the fitting at the floor to the stainless steel flex hose to add one. So I really needed a way to adjust the pressure. This shut-off valve is well made but it did not come with a rubber gasket for where it attaches to the underside of the toilet. I tried using the gasket that came with the plastic valve but it leaked like crazy. The plastic valve and the metal valve are configured differently at this connection. So I dug around in my plumbing stuff for a cone shaped gasket -- more like what was on the stainless steel flex hose that had been attached to the underside of the toilet. This worked perfectly. No more leaks! BTW the directions for the bidet show a cone shaped gasket but that is not what you get. The gasket that comes with the bidet and the plastic tee is shaped more like a hollow top hat.So, if I decide to order a second bidet for my other bathroom (also no shut-off valve) I will be sure and get a cone shaped gasket that fits this metal tee before I start my installation.Update May 1, 2014: The Luxe folks contacted me through Amazon after my review went live. They said I should have gotten a rubber gasket with this valve and apologized for it being missing. So I asked them to send me the proper gasket. They said they couldn't do that but they could send me a whole new valve assembly including gasket and it came a few days later. I am extremely impressed with their customer service.
9%

There are no reviews yet

Three Star Reviews:

15%
Be sure you actually need this before ordering.... MUCH smaller than I expected and attach using adhesive strip...
September 17, 2017
Bought to use with bidet kit. Didn't end up using them. Not necessary after all. Seems attachment with adhesive strips may not be the most sanitary version of attachment... not sure though what the alternative would be - using screws? More holes would be more areas for bacteria to hide....
Not the best adhesive.
September 6, 2017
"They're okay" seems about right. The problem is that the adhesive just isn't good enough. It'll last for awhile and, if you use some glue, you can probably get plenty of use out of them; but if you depend on the included adhesive you'll eventually hear a splash and see that one of these has somehow ended up in the drink.
Needs stickier adhesive...
August 29, 2017
They do what they're supposed to but they don't stick for very long. I've had to replace the original tape that came with it several times now. Would be nice if there was a product that stuck well to the toilet.
Ok but doesn't stick.
June 6, 2017
Perfect height but they won't stick. Just kept coming apart from the doubled sided tape no matter how much tape was replaced.
A plumber of 43 years.
May 10, 2017
They work fine on a solid seat. Today's seats are thin and have built in bumpers. These will not adhere to the manufacturer bumper. They are too small. The underside of the seat must be flat.
Worked fine. so far cleaned tolet lid with cleaner and ...
May 1, 2017
Worked fine.so far cleaned toilet lid with cleaner and let dry.Revised: 06/09/17 You had better have Gorilla Glue if you expect theseto stay stuck to the lid.
6%

There are no reviews yet

5%
Three Stars
June 16, 2017
Doesn't seem to gradiate well.
Would have been just as useful and less expensive if it were just a "Y"
April 23, 2017
Would have been just as useful and less expensive if it were just a "Y". The valve part is redundant.
and tweaked the supply valve at same time and got everything adjusted to the best possible point
August 5, 2016
The adjustment is not fine-tuneable enough. I'm using it with a Luxe Neo 120 bidet. I experimented with this in different levels of open/close, and tweaked the supply valve at same time and got everything adjusted to the best possible point. Even then, the bidet's pressure knob still doesn't allow great fine tuning. As soon as you turn the knob, just the tiniest amount you can turn it, that is basically a comfortable pressure level. If you go any more than that it's like Drake's song....0 to 100 REAL QUICK.I would still recommend using this if you have one of the non-electric bidets, because without it, the pressure sensitivity is even worse. Oh and the plastic one the Luxe products come with is straight TRASH and WILL leak if there is even the tiniest amount of lateral force placed on the fitting due to the stiffness/tension of the supply line, which is most cases there will be. Save yourself the hassle and buy this at the same time so you can do the install once and get it up and running the first time.
Works good for cold water, but doesn't stop hot water line
April 25, 2015
Ok, so this is more of a 1 star product if you have a hot and cold water bidet.This product ONLY shuts off the cold water flow -- hot will flow just fine with this switched off. I wish that would have been a little clearer in the description. It does do a good job of completely block the cold water.It looks nice (although in my case it is hidden behind the toilet) and seems heavy duty.Installation was fine -- same process as the plastic stock one, and there have been no leaks.I think a shutoff valve should be a standard feature on the bidets or at least higher end models.We have 4 bathrooms -- if this feature was standard I'd probably get a bidet for each bathroom. With curious kids and no way to fully shut it off that isn't going to happen.
High quality, needs more threading to use on a toilet.
January 3, 2015
This is a high quality T-adapter with one problem, it doesn't fit the plastic connector at the bottom of my toilet. The nut doesn't have enough threading to grab the connector and hold it tight to the gasket, and so it sprays water. I will keep it though, and use it as a shower adapter where the connections are all metal.
OK, not great and overpriced
December 18, 2013
Just like the bidet this adapter is made for, it's ok, not great. It's easy to install and you can lower the bidet water pressure with it - which makes the use of the bidet a less stressful experience - but it also lowers the water pressure going into the toilette tank, so now it takes a little longer for it to fill. The bidet water pressure is still not variable with the bidet's control handle. It's either on or off. And with the lower water pressure the bidet's self cleaning feature doesn't seem to work very well. So you win something and you loose some things... And if you add the price of the adapter to the price of the bidet, the whole package is not that great of a deal anymore.
16%

There are no reviews yet

Two Star Reviews:

13%
Only 1 left 6 months later
October 30, 2017
1 remaining in place after 6 months. Bought these because it was a suggested item with my bidet. My bidet is awesome. These bumpers though don't stay in place and I'm lucky 1 remains where I placed it. That's probably the most crucial 1.
This is a good concept but it needs to be stickier because they ...
July 15, 2017
This is a good concept but it needs to be stickier because they fell off after one day and I had to reinforce it myself.
does the job for a week or so
May 22, 2017
The glue or the sticky side doesn't work..... the bumpers fell after two weeks of use...
Does not stick well!
May 20, 2017
Not happy at all with this. One side unstuck after a month and got flushed down. The only reason I didn't give them one star is that it is a great deal.
... plastic material is so hard that it doesn't seem like it does anything different than the toilet seat hitting
April 23, 2017
The plastic material is so hard that it doesn't seem like it does anything different than the toilet seat hitting. Plus they're large and too bulky.
Adhesive issues
April 16, 2017
The product Adhesive is very disappointing.. Will not hold for long period of time
0%

There are no reviews yet

5%
Wouldn't stop leaking.
May 6, 2017
Couldn't get these to stop leaking when installing with 2 of my NEO120 Luxe Bidet, so I just went with the plastic T-valves that came with the bidets. These didn't come with the correct cone-shaped washer in the end that attaches to the toilets.Unfortunately, it's too late to return them.
Could not get a good seal
May 3, 2017
This did not work for me w/the Luxe Bidet Neo 120. I could not get a good seal between the toilet and adapter. I had to go with the plastic T-Adapter that came with the original Luxe Bidet Neo 120. The reason I spent the extra money for this was the reports on Amazon of the plastic adapter not working well. I have not found that to be the case.
Looks like quality, but I didn't need it.
July 15, 2016
I ordered this because the Luxe Bidets I installed had a little too much pressure. I found out I could temper the water flow by opening the clean valve, so I didn't install it.
I have had this for about 1 month and it ...
September 14, 2015
I have had this for about 1 month and it is not used on a daily basis. I always turn it off when I am not using the bidet. Today, I noticed that it does not shut off the flow of water completely anymore. In the shut-off position, a small flow of water is still getting through. I purchased this as an extra precaution against the Luxe Bidet Neo 120 bidet leaking, but that peace of mind has been shattered now that I see that it will no longer completely shut off the flow of water after only a month of use.
Interaction between control of output
June 30, 2015
This valve is designed so that there is an interaction between the control of the two outlets---as you open 1 it closes the other. This makes for a delicate balancing act to set it as you want it, most importantly leading to a really, really long fill cycle for the toilet unless you reduce the bidet pressure to an ineffective level (even wide open the flow to the toiled is severely impeded. I have replaced these with simple shower flow control valves on the bidet line that allow unimpeded flow to the toilet and easier, better control of the bidet pressure. They are also cheaper.
Might not do what you think.
August 30, 2014
The Adapter was a disappointment.The top connection (that screws into the Water Tank thru the Float / Ball Cock to release water). It simply screws into the T adapter. I thought this was joined to the T Adapter permanently. That made trying to connect this a royal pain.After all was connected. And water from the Wall Water Valve opened full.I had no water pressure for the Float / Ball Cock (the items that fills the Water Tank).I had bought this to hook up to a Luxe Bidet Neo 120.So I tried the Bidet.....hardly any water pressure.Flipped the Adapter. Now no water pressure for the Bidet. And the Water Tank slowly filled because of hardly any water pressure.The holes on this thing are tiny....so your not going to get water going at all. Either Way.I was under the assumption that this was to either: Have full water going to the Bidet and Water Tank. OR. Go turn lower or turn off water pressure to the Bidet and Water Tank.What this does is: Either hardly any water pressure to Water Tank and none to Bidet OR hardly any water pressure to Bidet and none to the Water Tank.I installed the Plastic T-Connection that came with the Luxe Bidet Neo 120 (which the top that connects to the Float/Ball Cock is part of the Plastic T-Connection....its fully connected and spins unlike the Luxe Metal T-adapter) and hey plenty of water pressure to the Water Tank and Bidet. I can now fill the tank in normal time/speed and the Bidet pressure now....lets say makes me worried about injury down below if I choose full blast.So just note: This connector doesn't control the Water Tank and Bidet Pressure together.Its a one or the other.....and both are weak because the holes are too small.
6%

There are no reviews yet

One Star Reviews:

23%
No sticking power
July 23, 2017
They did not stick from the very first day I tried to stick them on underneath the toilet seat. I tried several times and nothing. The stickers that they provided wouldn't even stick to my skin. They fell in the toilet and I had to go fishing for them.
Forget it
May 25, 2017
Well, not only did it not fix the problem of the space, after two weeks one of the bumpers on each of the two bowls, fell into the toilet and got flushed. Threw it away. It does not stick for long.
Use Spacers instead of Bumpers
February 25, 2016
There's a simpler, much cheaper, and longer-lasting alternative to using these bumpers to close the new gap at the front-end of the toilet seat created by inserting the bidet attachment under the back-end: for $1.50 I bought a pair of 1x3/8x3/8" spacers through which I inserted the two screws that hold the seat to the toilet bowl. The spacers were placed between the bidet and the seat. This changes the angle of the seat so the front of the seat is resting on the toilet again instead of being cantilevered with a gap above it.
Nice bumpers, bad choice of adhesive pads!
June 2, 2015
I read the reviews and thought, I will make this work. Two days later, three of the four are gone. I carefully cleaned both surfaces and made sure to only stick them once and put a lot of pressure on them to get good contact. They seemed like they were going to hold up well, but one was gone after the first day and two more on the second day. The worst part is that they must have ended up in the bowl so they can't even be reattached somehow. The bumpers are good quality, but the adhesive pads are not strong enough for this application. If you buy them, I would use some other method of putting them on.
So the end result is that this is a useless product -- unless you buy your own superglue to ...
December 29, 2014
The glue which is supposed to make it stay in place doesn't work.So the end result is that this is a useless product -- unless you buy your own superglue to stick it -- else tell the seller to stick it.
Dont waste money on this product.
September 22, 2013
I have never given 1 star to any other product here in Amazon. But I had to give a low rating as I don’t think this product is ready for use. I have a plastic toilet seat and so I didn’t want to buy bumpers with screws. I decided to use this product that sticks to toilet seat. The package contains 4 bumpers as shown in the product photo’s and a rectangular adhesive tape with bumper shape perforations. One side of the tape sticks to the bumper and the other side goes on to the toilet seat. The tape adhesive is of poor quality and cannot hold the bumpers. 3 of the 4 bumpers came off in less than a week. The tape is still sticking to the seat but the bumpers are gone.
3%

There are no reviews yet

21%
Leaky
May 10, 2017
I had this a while before I was able to get around to installing it on our bidet. Too bad, because I would have returned it since it leaked badly. It looks good and feels good, however.
Leaks not worth buying
April 13, 2017
The quality of this adapter looked really good, but I could not get a leak free connection no matter what I tried! I ended up returning this item because of the leak.Opt for the slightly more expensive Aquauas model
It's leaks.
September 16, 2016
Just like their plastic one that comes with the actual bidet itself. Something about their plastic washer is simply not right. It leaks from under it, and I've screwed it on as hard as I can to prevent it, but regardless, it leaks. Even with plumbing tape, etc. These must all be manufactured wrong. I regret buying their entire bidet now because you cannot get this part to work properly at all making the bidet useless.
Adapter is defective for two reasons
December 7, 2014
First two positives: The product is nicely chromed. The valve function is smooth.I bought this to use with the Neo 110 which is its advertised and recomended purpose. I see no logical reason why these defects would not be relevant to all of the Luxe bidet models.Now the problems: (1) The threading on the supply side fitting is so over chromed that the supply line cannot be properly tightened against its gasket. Since the supply line hose requires a tight compresion of its washer gasket to form a seal that means the fitting will absolutely leak. (2) Even if it fit the supply line, the adapter would be defective in that not only reduces flow to the bidet, but also reduces flow to the toilet tank. If you use this valve to reduce water pressure at the bidet, you would extend tank refill duration to an unacceptable point.I have abandoned and will return this adapter. The supply line did attach well to the flimsy plastic T which is unfortunately subject to a lot of stress as you connect and tighten nuts to the tank, the supply line and to the bidet.
The design is faulty. If you look inside the ...
July 8, 2014
The design is faulty. If you look inside the threading where this T-Adapter attaches to the water supply (the bottom threading on the picture), you will see that there is just a tiny hole for the water to go through. This caused leaking due to the inability of this t-adapter to handle pressure. This is a faulty design, where the water inlet and water outlet (to tank) should have been a straight pass through, and the shut-off valve should have been on the side, instead of the shut-off valve reducing the size for which the water passes through to a hole the size of a pea. I will try to post a picture of what I mean.
Leaking
January 19, 2014
I could not get this connector to stop leaking despite tightening it as much as I could. The leak occurs underneath the top nut. The issue is that the whole tee connector spins around, despite tightening the top nut to the toilet tank. I went back to using the cheap plastic connector, rather than deal with the hassle of exchanges. For the price I am not sure if it's worth it, even if it worked.
38%

There are no reviews yet

Vote for Me
Vote for Me
Vote for Me
Vote for Me
Pricing info
Old Price
Old Price
Price
Price
$6.22updated: Mar 17, 2020
$15.29updated: Mar 12, 2020
$11.95updated: Mar 20, 2020
$13.36updated: Feb 22, 2020
Features
Article Number
Article Number
7336117823953
0735204871827
7241870822344
0714394989079
Brand
Brand
Danco
SmarterFresh
LUXE Bidet
Lictin
Currency
Currency
USD
USD
USD
USD
Height
Height
218.9 in
98.4 in
59.1 in
31.1 in
Label
Label
Danco, Inc.
SmarterFresh
Luxe Bidet
Lictin
Length
Length
23.2 in
98.4 in
137.8 in
279.1 in
Manufacturer
Manufacturer
Danco, Inc.
SmarterFresh
Luxe Bidet
Lictin
MPN
MPN
10062
SF-TVA130
1516-Shutoff-Adapter
LTB236862US1
Number of Parts
Number of Parts
10062
SF-TVA130
1516-Shutoff-Adapter
LTB236862US1
Product Group
Product Group
Home Improvement
Home Improvement
Home Improvement
Home Improvement
Product Type
Product Type
PLUMBING_FIXTURE
PLUMBING_FIXTURE
PLUMBING_FIXTURE
PLUMBING_FIXTURE
Publisher
Publisher
Danco, Inc.
SmarterFresh
Luxe Bidet
Lictin
Reviews
Reviews
Studio
Studio
Danco, Inc.
SmarterFresh
Luxe Bidet
Lictin
Title
Title
Danco 10062 Toilet Seat Bumper Kit, 4-Piece
SmarterFresh Brass Brushed Nickel Finish 3 Way Shut Off Valve Bidet Attachment, Three Way Metal T-Valve Adapter, On Off Valve for Tee Adapter
Luxe Metal T-adapter with Shut-off Valve, 3-way Tee Connector, Chrome Finish, for Luxe Neo Bidets
Lictin 5 Pack Silicone Toilet Seat Bumpers for Most Brand and Model of Toilet Seat(white)
Weight
Weight
0.1 oz
1.1 oz
2.1 oz
0.6 oz
Width
Width
116.9 in
59.1 in
118.1 in
122.4 in
Feature
Feature

Used for toilet seat repair

Fits any brand and model of toilet seat

Attches to toilet seat with custom-fit adhesive pads

Includes 2 seat bumpers

Easy to install

Desirable Brushed Nickel Finish - Class of It's Own - Matching Other Brushed Nickel Bathroom Accessories & Great Alternative to Standard Chrome Finish

Compatible with SmarterFresh Hand Held Bidet Sprayer, Cloth Diaper Sprayer Set and Majority of Other Standard Size T-Adapter Sets

Can Be Used to Replace Flimsy Plastic T-Adapters Found in Many Non-Electric Bidets. Thread Size is 7/8" x 7/8" x 1/2"

Gives Owners Ability to Shut Off Water Flow When Not in Use (for Safety & Children) and/or Adjust Your Home's Water Pressure to Suit Your Preference

Made from 100% Brass, Superior Quality, Leak-Free, Durability Guaranteed. Easy On in a Minute or Less.

Compatible with Luxe Neo Bidets (Neo 110, Neo 120, Neo 180, Neo 185, Neo 250, Neo 320) and Vi-110

Shut-off Valve gives ability to turn off or reduce/adjust the water pressure coming into the bidet

Ideal for households with children (bidet can be "locked" so it cannot be turned on by accident)

Size of 15/16" x 15/16" x 1/2". Replaces the cold water t-adapter that comes with Luxe Bidet

Strong metal and ceramic valve with beautiful chrome finish, for smooth and reliable operation

Usage:toilet seat repair

Applicability: most brand and model of toilet seat

Environmental material:environmental silicone makes it solid and durable

Nice shape, light and sturdy

Easy to install

Sorry, there's no review at this time. Try changing the filter or leaving one.
Share your opinion
User Rating
Post Review
Please enter captcha code
captcha
Send