Side by Side Comparison of: Torin Jack vs Rage Powersports

Wish I had bought this sooner. It is low enough to slip under my VTX1300S and raises its 700 lbs to a comfortable work height.Once i added tie down straps it was solid and I was able to move the bike around fairly easy. I would definitely recommend this for any owner of a cruiser.

good

solid construction... no issues so far... lifts my 2011 Police Road King up just fine. Perfect for oil changes. I'm not using it on a daily basis but have had no issues with quality or construction. I will say not having a handle to maneuver it around the garage is kinda lame. using the stupid pole/hook thing just doesn't cut work for me, but for the price I'm happy.

Bought this as a Christmas gift for someone and they loved it. They said it was very well made and worked perfect for their motorcycle.

I love my motorcycle lift, I even used it to help me get the front differential out of my Toyota Tundra 2000 SR5 and it worked well. Without this I would have had some major issues doing some of the most basic maintenance on my 2001 Yamaha Midnight Star. To date I have had no issues!

Bought this jack for my v star 1100. Easy assembly. This jack is a universal fit for most motorcycle, I added 2 pieces of plywood perpendicular to the lift pads, because one of the lift pads rested on the engine and made lifting unstable, other than that I love it.

I like it a lot! I have another brand that is similar (BlackJack) and it differs only in the side extensions (the little angle-iron pieces on the sides) on this jack are offset toward the tool end. This works well for me as my other jack has the same sort of extensions, but they are centrally located. This is great as I can use BOTH jacks close together on the same lift. This unit is made in China, of course, and matches the BlackJack for build quality.My recommendation is that BEFORE using the jack, *grease* the screw threads as they are shipped dry and check all fasteners for tightness.

excellent quality, amazing design touches like the ballbearing washer on the jack screw, to reduce jack screw turning forces when loaded. There are some poorly cleaned up rough and sharp edges. The saddles fit almost to loosely, The extra wide out rigger base make this a very safe tool and the heavy duty steel construction has made this an exceptional value.

I have a lift for my touring bike but needed something to lift it up to work on the tires & this lift works great. Built tough enough to lift my 800+ lb bike. I use a socket & ratchet as the tool that came with it has basically a short rod with small nuts welded on the ends. It's not comfortable nor long enough to apply proper turning effort when lifting a heavy load like mine. The height is very good. The width & length are good so as not to tip or rock but I still secure the bike with tie downs so it lessens accidental tip overs possibilities. I haven't had any use for the 2 sliding stands that came with the unit since my bikes have flat bottoms.

I do all my motorcycle maintenance right on my street in Manhattan, and this thing was the best purchase i ever made to that end. I can jack up while the bike is parked between two parked cars. Chain maintenance, sprocket replacement, all that kinda stuff with a jack I can just carry downstairs and store in my closet. Real world DIY perfection.

I bought this motorcycle jack so that I could change the fluids in my 1200 Sportster and Heritage Softail. It really works great for this purpose. I did throw away the tool that came with it and use one of my longer handled socket ratchet wrenches. I have also found that the motorcycles take up a lot less room in the garage when they are sitting up right on the Jack. Its also handy for lifting the wheels off the floor for cleaning.

Works great! wish i would have got one years ago. love it, yes buy one! i use it all the time just keep it oiled good and im shure it will last a lifetime.i got this almost 1 year ago now and use it at least 1-2 times a week i work on Harleys.

Better ones. But for price. I'll keep it. Small issues

It lifts my 450lb bike no problem. It is a little wobbly, but still seems sturdy enough. I wouldnt recommend lifting 1500lb with this jack though. I cannot even see it safely lifting over 600lb

The pads are just long enough for my 1500 meanstreak. The weight of the bike so far. is not a problem for the jack. The arms flex under her FAT !%#$ but it works good so far. The box was damaged during shipping. Most likely from the carriers due to the weight of the jack. I got lucky none of the hardware fell out of the tear holes.

I based my purchase on the fact that I've used one of these before, great product

My small motorcycle apparently is a little heavier in the front than I figured.I had to put the front wheel on a block until I get it jacked up and secured.The Jack is very well made and works as it should. A little awkard the first timebut just getting use to is and will do just fine. Like it a lot and will share it witha friend that has the same cycle as mine.Not a lot of room under for a oil pan so I used a 1-1/2 lb Folgers Red Coffee container. Worked well

He was giddy like a little boy on Christmas day! Had been needing and wanting one for a long time. He says he loves it. I was a little disappointed when it arrived because the box was smashed and torn everywhere and the stickers on the actual item were peeled or scratched. That was probably from UPS who delivered it. He did mention that the long black handle was useless. We did put his Honda Superhawk up on the jack and it wasn't 100% sturdy. The bike was a little wobbly and wanted to fall over when the handlebars were turned to the left, so maybe it needs to be strapped to the jack?? He says all in all it is a great item.

With my grinding wheel I had to cut down the nuts and bolts about 5/8". It was too tall for my 2013 Kawasaki Voyager 1700. Now it works perfect!

I have to give this a slightly less than ideal rating, but this is partly because it doesn't fit my bike properly. That is not the fault of the jack, but I can knock this rating down slightly due to the mechanism of raising/lowering the jack.The product looks good, and is of simple design. The pieces on top slide to as wide/narrow as needed. It's fairly straight-forward.My bike, a Triumph, has no center stand, no frame underneath (to put a jack under) and it has an exhaust that extends slightly below the bottom of the engine. In other words, I can't put the jack perpendicular to the bike, as desired for safety. I am able to tun the jack nearly parallel to the bike and put the arms under the fins of the oil pan, but that wasn't all that sturdy. So, I can use this jack for the rear of the bike, as I can put the adjustable-width arms of the jack under the sides of the swingarm. In that configuration, I can jack the bike up easily and have a nice sturdy set-up.What I don't get - the product comes with a short 'wrench' that goes on the end of the unit, and one turns the handle in order to jack the bike up or down. I am reasonably strong and the bike is not all that heavy, but I really wonder if anyone at the manufacture ever tried to actually lift a motocycle using that enclosed/included jack handle?? I say 'no way'. Note that you can just put a wrench or socket onto the jack and use that instead; at least you are not required to use the enclosed jack handle.

Over all this is a decent product but the handle that was provided was impossible to use on my street glide, to lift it required a larger wrench. 7/8ths by the way. It does collapse down small enough to go under a low bike and the extensions make it usable on a higher bike. I would hvae given it a 5 star but the handle let me down. The extensions are not usalbe on a low bike.

If you've looked around, this is the same jack that most motorcycle/fab places sell for about twice the price. It works as advertised, however unless your bike sits fairly high, the two upright stanchions will not work. I tried it both on my Harley Davidson Sportster and Road King and it would not clear on either bike. The jack still works without them, but the bike can slide around if you're not careful. I plan on modifying the stanchions to make them shorter and non adjustable, but in the mean time I just used a piece of tacky toolbox liner. That worked okay for the time being.

I purchased the Black Widow lift after looking around at various other lifts in the market (which frankly all looked the same, perhaps there's one manufacturer in China that makes all of them). The price through Amazon was clearly better than anything else I found by at least $30. The lift itself is simple to operate and does exactly what it says it will do. My bike is just under 700 lbs and no issues with it. I intend to store the bike this winter with it up on the jack. My one significant fault was that the hole in one of the sliding bars that supports the bike did not align between the threaded outside portion and the interior unthreaded portion. This resulted in the bolt that tightens the piece to the body of the lift would not come through and hence the part would not tighten to the jack body. It took a considerable amount of time to bore out a hole through the piece without damaging the threaded portion. This is clearly a problem with quality control, or lack thereof. If not for this extremely annoying issue, I would give this product a full 5 stars.

You would think something that looks so simple would not work as good as it does.fact is works as good as any brand or style out on the market

HARD TO PUT TOGETHER WITH NO DIRECTIONS AND (2) MISSING BOLTS THAT HOLD JACK ON FRAMEANY WAY TO GET BOLT SIZE ??? OR BETTER YET YOU COULD SEND THEM TO ME.IF I COULD PUT IT TOGETHER I MIGHT BE ABLE TO RATE HOW WELL IT WORKS

Not bad but not great, the handle is a joke. Buy the harbor freight jack instead.

Jack isn't level after 1st use lifting my Harley. No problem lifting it, but it is now not level when lifting. OK for the money and would buy it again if I needed one.

WORKS FINE BUT WAS NOT MADE CORRECTLY ONE HOLE WAS DRILLED IN THE WRONG PLACE I HAD TO REDRILL SO AS TO BE ABLE TO ASSEMBLE

I received the floor jack in good condition and in a timely fashion . All was good until I opened the box and started putting the thing togather. I was missing two major nuts and bolts. After reading the reviews it seems as though it's a common thing for that seller ! What's that about ?

Hello,I used the jack for the first time and was impressed. I was not impressed with the assembly. I was missing parts and had to dig through my stockpile of spare parts to find a nut to replace the one I lost. I have a Triumph T100 and when teh jack is fully extended the bike is a little wobbly. Bike weighs 500lbs. Overall I would give this Jack a satisfactory rating.

The good. :: Sturdy. Strong and well made. The bad. Slippery surface. The bike will actually slide if it's not on the frame holders.With the frame holders It is too tall for My HD ultra. I use an air compressor to raise and lower it with an impact wrench and no matter how slow I go the screw always comes off the nut on the back side. No big deal but a stopper would be great. The bike feels sturdy though so no issues there. In closing I would recommend this to another consumer but get non slip tape.update 5.4.17- i have to use boards to get the tires off the ground to get this underneath the bike. picture says it all. So I am not too sure it is worth the effort. I think there are some out there that will work better. I should mention. Without the frame holder it fits fine. oh, the picture was not sideways when i uploaded it..

had too modify, too tall to get under bike

too tall for a 2015 Dyna FXDF. Need to use without adapters.

Not useful for my bike because of clearance issue so returning it, but seems well built and probably useful for others.I have a 2005 Harley Sportster 1200 Custom (XL1200C).I bought this jack so that I could do some maintenance on the bike that require the rear tire to be rotated by hand, the bike to be level horizontally (left to right of rider),the engine oil drain hose to be accessible and that there be space beneath it to capture the oil. This was not possible using the adapters because even with the jack fully collapsed they did not have clearance enough to slide under the frame. After removing the adapters I found I could slide the jack underneath the bike and then slide a 1.5" x 1.5" x 6" piece of wood between the jack and the bike which would just clear the frame which allowed me to crank the bike upright until it was stable vertically and the rear tire had just cleared ground. However in order to do this on the sportster without damaging anything I'd had to position the wood just in front of the oil drain hose (and just shy of an exhaust crossover pipe that hangs slightly lower than the frame on the right so as not to put stress on that) and so to have room to drain moved the jack forward such that the wood was on the side of the jack rather than in the middle, which caused the jack to tilt sideways along it's length, which was alarming. Moving the jack further back corrected the lean, but took up all space needed for something to capture oil, at which point I decided to call it quits and try a center lift stand instead. Some measurements I did which someone might find useful:#1 The height of the jack without adapters and fully collapsed is 3.5 inch.#2 If you add the adapters then and screw them in all the way then the height from the bottom of the jack base to the top of the adapter (it's a U shape, so to the top of that U) is 6.25 inch.#3 There are 4 holes in the top of the base, in two pairs. The holes are 3/8 inch in diameters and measuring from center of hole in one pair to center in the other pair you have 5 inches (which is exactly how far apart the bottom of the frames are on my sportster, which leads one to entertain other modifications to make this thing work).#4 The bottom of the adapters (the lowest point in the U shape) is flat and about 1.5 inches across (a 1.5" square piece of wood just fits within it).ps...I also found I could not raise the bike using the supplied hand crank (though it was useful for lowering, or expanding jack to add/remove adapters) and could not find large enough socket to fit it so used a large crescent wrench instead.pps...I also tried inserting jack under frame by first rolling rear tire onto some wood panels. This worked but the lean of the bike on left stand prior to jacking up seemed too extreme and so unsafe to me (though in fairness I don't know how strong the stand it to take this added angle so admit it may be fine, dunno)

The Black Widow 1,100 LB Capacity Motorcycle Jack does what it's designed to do; however, the crank mechanism could use some refining in order to lift the weight of a touring bike rear wheel off the bike lift when lifting the front or rear tires when service is required. The crank mechanism is very rigid when the scissor jack is in the lower portion of the lift. As the scissor jack gets over-center the crank ratio/weight factor improves.

It does the job however, not without modifications. I have a 09 FLHRC(That's a Road King Classic, if you're not familiar with Harley Davidson alphabet soup). The jack will not fit under the bike without removing the sliding support brackets, as one reviewer mentioned, so I purchased a foot length of hay baler strap at the local Tractor Supply store to provide cushion between the frame and jack. It seems to work, just use care in the jacking-up process, as it is a bit unstable until the full weight of the bike is on the jack, or better yet have someone hold the bike while you jack it up. Eventually I will cut the brackets down to size and reweld them to the sliders.

Product did not work for motorcycle.

Good product as long as you are handy and have extra bushings, bolts and nuts to make it work. Just like previous reviews it comes in its original box and there were parts missing. Once you get it together thought it works good.

The major components are sturdy enough, but the smaller parts like the catch arm that locks the jack in place as it rises is cheaply made and it doesn't fit perfectly, and it took some slight modification to get the piston in correctly. I used a wood block under the center of the jack to make sure my bike didn't fall while I have it in storage, but I don't see a problem for using this to jack i up while working on the bike.Also the wheels SUCK, a good set of casters would have made this go from a 2 star review to a 4 star review...but alas...these are not a good set of casters.

If you want a lift that will almost kill your bike, then this is for you. I applied maybe a half pound of pressure and my 750 pound motorcycle dropped from 16" like a ton of bricks. DO NOT BUY.

I BOUGHT, but its come broken

PIECE OF S.....T

This jack is Defective it gave out on 7-seperate times while my husband had his motorcycle on it. the groves don't line up so it's allowing the jack to slip out of being locked in place. but I just find out that this jack now can't be returned there is no place listed on here to get in contact with the company I ordered this from. I would like this to be replaced so I am hoping the company that this defective Jack came from will see this and get in touch with me so this can be replaced.

I feel this jack should only used on bikes and ATV's 900 lbs or less. It be comes very unstable when lifting full size motor cycles.

Have not been able to get jack to work. Have talked with Torin to no avail. They do not return phone calls. Finally got a reply and they suggested something to do but still doesn't work. Have tried talking to them again but once again they are not returning phone calls. Very disappointed!!!!!

Jack is very unstable, so much so that I do not feel comfortable even putting a motorcycle on it. The bottom seems to be bowed or bent. Product looked to be used when I received it.

If this were under 4" at start like they claim it is I would be able to use it the way it's intended. But noooo you have to strip it down to a substandard jack that's not what you're paying for and they don't tell you that either anywhere that I see' 3.75 is without the rubber stilts slid over the base. Very disapointing. If I had known that I would've never bought it.

Did not hold up under limited use. Returned for my money back. Coworker uses one without any problem. Not sure what happened to the one I bought.