| Learn More |
Learn More | | | | | |
|
Rating info |
| eComparisons Score |
eComparisons Score The "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users | | | | | |
User Rating (Amazon) |
User Rating (Amazon) | | | | | |
|
| Great for the priceApril 2, 2016 This jack worked great for me replacing my front fork seals. It is light weight and easy to use. My bike weighs 850lbs (Harley-Davidson Dyna Fat Bob) so a little tough raising with the tool provided, but I didn't want to use an impact and raise the bike too quickly. The saddles were too tall to get under my frame so I had to just raise without...I do wish there was a non-skid surface as my bike slipped a little. I only raised high enough to get my front tire of the ground and felt the bike was stable enough. I did use caution when using force. Overall the best lift I saw for the price. I'm happy with my purchase. Works great!March 7, 2016 This is turning out to be one of the most used items in the garage. I have several bikes, and none with a center stand. Yet many procedure (checking coolant, oil, etc) require the bike to stand upright - how the heck do you do that by yourself? Witht this jack, that's how. Works like a champ and does exactly what I wanted. Exactly what I needed at a very good price.February 22, 2016 This thing is heavy duty and mine came with a wrench. Yes it is slick but I just glued some rubber pad to the top. I use it for my Dyna Fat Bob so I can,t use the saddles, but it is what I need and at half the price of the other ones. I would highly recommend it. Nice jack, especially for use with a lift table.September 21, 2015 Much sturdier than the cheap scissor jack I was using under my bikes.
I have one of the Harbor Freight lift tables, and having a bike up on it with just a scissor jack could be a bit spooky, even with it strapped down. With this jack, the bike will actually stay upright on it's own. (though I wouldn't want to raise it up without strapping it as well) It also gives better/safer ways to lift because of the adjustable pads. I can get on the frame rails instead of under the engine. I was always nervous about lifting by the engine cases fearing it might cave in some day.
I also like the wings on the sides. They offer even more stability, and would allow me to bolt it to the table should I be so inclined.
The build seems sturdy. The crank might be a bit short for good leverage on a really heavy bike, but it worked ok for my KLR650. I'm pretty happy overall. well brother in law an I own a hd ultraclassic ...February 11, 2015 well brother in law an I own a hd ultraclassic and hd rocker c. we bought a lift table from harbor freight and we needed a scissor jack to lift the bike while on the table. the xremepower scissor jack works perfectly for general maint. and tirechanging etc.... we are both over 60+ and these two jacks save our backs....cant believe we didn't buy them sooner.....nbl | | | | |
|
| Not a problem though because it was much to short to be of any use and buyers will be better off setting up their own 1/2" ratchJune 4, 2016 I gave the this scissor lift 4 stars instead of 5 because the socket tool provided for running the drive system was damaged in manufacturing and was a throw away. Not a problem though because it was much to short to be of any use and buyers will be better off setting up their own 1/2" ratchet and socket for ease of use and good control both up and down.
Some thin rubber or grip tape may be useful to inhibit the lift from sliding around both on the bottom and the top.
For the money this is a good little lift. Works well mounted on my lift. I notice there ...February 28, 2016 Works well mounted on my lift. I notice there is some lateral movement perpendicular to the scissors arms but nothing that would make me worried about buckling especially as I also use ratchet straps for safety to secure the bike while I'm working on it. Worth the priceJanuary 29, 2016 Decent product for the price, works well, only think is I had to remove those stands to fit it under my 99 Softail Custom so I I use the flat part which obviously is not as stable Great for motorcycle!January 7, 2016 A very good jack for my Honda Rebel.
One star off because:
1- doesn't have any feet. The blue painted bottom wears off paint as its been used.
2- The Honda Rebel has a too low clearance to use the 2 arms. I have to rest the bike on the blue top plate and not use the 2 black arms on top, shown in the photo.
3- For a Honda Rebel weighing only 350lbs tops, this jack is a bit too heavy.
On the pro-side:
1- it's currently the cheapest jack/lift available
2- it's well made to handle most bikes upto 1200cc, or heavier when only lifting partially. very sturdy product. it lifts my 2015 victory cross country ...August 17, 2015 very sturdy product. it lifts my 2015 victory cross country no problems well built and quick delivery I recommend this | | | | |
|
| Tight fitJanuary 25, 2017 Little clearance placing under 883 iron! Looks too be good quality, haven't had a chance to use it ...August 27, 2016 Looks too be good quality, haven't had a chance to use it yet. Came missing a bolt for one of of the adjustable risers. No way to tighten it down to keep it from sliding. Fine for lifting one wheel at a time.March 27, 2016 Used to light maintenance on my 883 Iron. Not too secure/wobbly and kinda lines up awkward with the kickstand but it works to elevate one wheel at a time. It works but could be betterDecember 9, 2015 I bought this to lift my dual sport motorcycles when they are up on my lift. For my purpose it will do the job just fine but i have a few observations that lead to a 3 star rating.
1) Every bolt on this unit was loose from the factory and some almost falling out. I tightened them all before putting it into service but they all loosened again. I have since used loc-tite on all the bolts.
2) The bottom and top surfaces are very slippery, as in raw paint. It slides around on my lift easily. I ended up going to harbor Freight and getting some stick on non skid rubber to cure this.
3) There was almost no lubricant on any of the moving parts straight out of the box.
4) When i'm lifting my bikes it really takes a lot of effort to lift them. My bikes weigh sub 300# and it really takes a lot of effort to get them off the ground. The wrench it came with i can barely turn once the weight of the bike is on the jack, i had to get a 22mm socket and a long 1/2" ratchet to move it effectively. I don't trust it will stay together if i used my impact gun on it. I cant imagine lifting a 700# plus Harley with this lift given the effort it takes to get my little TW 200's off the ground with it. Slippery surfaceMarch 24, 2015 The lift works fine, but the surface is slippery. | | | | |
|
| | | | | |
|
| | | | | |
| | | | | |
Pricing info |
Old Price |
Old Price | | | | | |
Price |
Price | $59.95updated: Mar 13, 2020 | $14.19updated: Mar 16, 2020 | $9.95updated: Mar 12, 2020 | $15.95updated: Mar 13, 2020 | $84.95updated: Mar 3, 2020 |
Features |
Brand |
Brand | | | | | |
Height |
Height | | | | | |
Length |
Length | | | | | |
Manufacturer |
Manufacturer | | | | | |
MPN |
MPN | | | | | |
Number of Parts |
Number of Parts | | | | | |
Product Group |
Product Group | Automotive Parts and Accessories | Automotive Parts and Accessories | Automotive Parts and Accessories | | Automotive Parts and Accessories |
Product Type |
Product Type | | | | | |
Publisher |
Publisher | | | | | |
Quantity |
Quantity | | | | | |
Reviews |
Reviews | | | | | |
Studio |
Studio | | | | | |
Weight |
Weight | | | | | |
Width |
Width | | | | | |
Feature |
Feature | Capacity: 1100 lbs (500kgs) Lifting Range: 3 3/4"(95mm) to 15 3/4"(400mm) without 2 saddles and adapters 2 screw adapters for variable height adjustment Simple crank operated jack Wide Base with 3" wings on each side for stability | Easy to use and read Tool allows for accurate belt tension to be set Use after belt replacement adjustment or wheel service Use on secondary drive belts with 10 pounds specification One year limited warranty | NON SCRATCHING - Protect your motorcycle, ATV, snowmobile, UTV and lawn/garden equipment and other applications during trailering. Abrasion resistant nylon soft loops prevent scratches to paint/chrome from tie-down hooks. STRONG STRAPS - Your package includes (4) 1 x 12" nylon soft loops, each having a 1,200 lb. working load capacity, laboratory tested 2272 lb. break strength. BRIGHT AND EASY TO FIND - Safety Neon Orange color ensures that you can properly inspect strap tension during installation and transportation. Also makes it much easier to find your straps in unlighted trailers. 1 YEAR REPLACEMENT - If they break, we will send you a new pack. SATISFACTION GUARANTEE - Our Soft Loops come with our 100% satisfaction guarantee. If youre not satisfied return them within 30 days for full refund. | Lose that top end tapping for good! THOUSANDS SOLD! Happy tap free customers all across the US and around the world! The result of my intensive research into the Harley Davidson Twin Cam tapping problem Easily installed with simple hand tools...complete kit, even includes an extra insert! Please scroll down for a complete description | Removes and installs 3/4", 1" and 25mm sealed wheel bearings Includes three pullers, a 3/4"/25mm installers, and a 1" installer Lifetime warranty How To Video: https://www.youtube.com/watch?v=xqXp5aUEHAc |
