4 items
| Compare | ||||
| Compare All Features Differing | ||||
Side by Side Comparison of: Kes vs Danco vs LUXE Bidet
| Learn More | ||||
Learn More | ||||
Rating info | ||||
| eComparisons Score | ||||
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users | 8.2 | 6.4 | 9.2 | 9.4 |
User Rating (Amazon) | ||||
User Rating (Amazon) | ||||
 | ||||
Five Star Reviews: | 67% Yoda approved July 20, 2017 It worked. It worked on apartment plumbing easily untouched for 30 years. [Knocking on wood] I used this in place of the plastic adapter that came with my new Luxe 185 Bidet. The only complaint I would have is that the Shut-off valve does what it says. So why am I complaining? Because the good folk posting comments over at the Luxe 185 Bidet suggested using the Shut-off valve to reduce the flow, which I do not think it does...well. It--the valve--obviously studied under Yoda: there is do or do not. GREAT QUALITY, GREAT FINISH April 15, 2017 GREAT QUALITY, GREAT FINISH, TURN OFF VALVE FOR THE BIDET, AND LOWERS PRESSURE TO THE BIDET SO YOU DON'T GET LIFTED OFF THE TOILET. When I ordered my bidet, it was recommended to get this 3 way valve cuz it worked better than the included plastic Tee from Luxe Bidet. Man were they right. At first I didn't think this was the right one cuz I was initially thinking it went to the water supply on the floor. Then after reading the instructions for the plastic Tee, I saw that it mounted at the base of toilet bowl. I tried the plastic tee, but it leaked. And you have to be real careful about cross threading it. Any way, this metal Tee worked great. It shuts off just the bidet so when little ones want to play with it or may think it a fancy water fountain, this solves the problem. And boy does it help lowering the pressure coming into the bidet. The plastic Tee did not shut off or lower pressure.This Tee is well made and the nut to tighten it on the toilet does turn separately, so easy install. Don't loose the included washer for this great quality Tee. I highly recommend buying this Tee (they have the 3 finishes to match your bathroom finishes.) for all bidets. The price for this high quality Tee is extremely fair, and you cannot find one at Home Depot nor Ace Hardware. Nicely made shut off valve t adaptor to use with toilet bidet.... controls water pressure, allows shut off to bidet flow March 4, 2017 Bought to use with the Zen Bidet 300. Nice to have a shutoff valve in line to be able to turn off water supply to bidet. This is a must if you have high water pressure and want to use a bidet. Otherwise you could be blasted off the throne! Easy to install and works well. Installs under toilet tank on threaded post coming from toilet tank apparatus. If you purchase this to use with bidet, you will likely need a different water hose between the valve and the water shutoff. I needed a 3/8" x 1/2" hose of 16" length. A must have for bidet comfort. July 17, 2015 This tee is a high quality precision piece of insurance to have in-line of the water supply.The functional use that I hadn't foreseen was the ability to throttle down the water volume to the bidet, which has a lever with a less than delicate range of modulation, if inadvertently turned up to high can feel like a dental tool on your sphincter.I would not install another bidet without one. Solid design, great look, and functionally perfect. June 10, 2015 This little piece of equipment is fantastic. Solid design, great look, and functionally perfect.I used it to control the flow to my Luxe Bidet Neo 180 but the primary reason I bought it was the loose nut at the top to allow me to tighten it to the toilet without spinning the entire device. This allowed me to point the bidet hose in the direction that suited my needs.Also in my case, the toilet design did not allow me to rotate the whole piece so it had to have something like this. Heavy duty! June 1, 2015 Heavy duty t-valve adapter! It's solid brass with a chrome finish. Looks great and works very well. It does come with a washer. I bought this to use with the KES hand held bidet and the KES stainless steel hose. It adjusts the water flow to the bidet, but not to the toilet tank. You can also completely shut off the water flow to the bidet, if need be. I highly recommend this product! | 36% I bought this for my bidet. I haven't had ... September 26, 2017 I bought this for my bidet. I haven't had any issues. We left it alone for 24 hours and I think that did the trick in terms of letting it set. Also, we just used the oblong ones, not the little dots Small accessory makes all the difference!! August 20, 2017 Definitely needed with the Luxe Bidet Neo 185. Once bidet is installed, toilet seat will be higher so these bumpers are applied to FLAT SURFACE of toilet seat and then it is level. If underside of toilet seat is not flat, you may need to change toilet seat. Well worth it. Excellent product if you need a bumper August 16, 2017 Strong 3M tape on the underside helps keep it in place. No noise or lid flexing when sitting on the toilet now. It seats the lid comfortably. Its use will depend on your toilet lid. This was a necessary add-on for one of your toilets when we installed the Luxe Bidet 180, but not for another toilet, which was by a different manufacturer and had a Luxe Bidet 120 installed on it. As advertised perfect for application August 6, 2017 theyre the perfect size for the bidet I installed, and is you dont have the controlled close lid like ours theyre a softer rubber and less likely to crack the seat having the 2 extra round ones add stability to front of seat for heavier people or if you install a bidet Good to have around June 22, 2017 glad these are available from Amazon. Made a bidet purchase and thought I would need it to level the seat after installation, but I did not. I am glad I had them on hand though. Will use them for another project. I use " Loctite 1365882 20-Gram Bottle Liquid Professional Super Glue" glue two long and one round bumpers on ... February 22, 2016 I use " Loctite 1365882 20-Gram Bottle Liquid Professional Super Glue" glue two long and one round bumpers on to the plastic seat. Use large size binder clips clip over for a night. Happily forever! | 80% There are no reviews yet | 0% There are no reviews yet |
 | ||||
Four Star Reviews: | 9% Key piece of information - Do not use plumbers tape ... June 24, 2017 Key piece of information - Do not use plumbers tape - just tighten the nuts by hand - use a wrench without too much force if hand tightening is proving difficult. The washer inside will get compressed enough to provide a water tight joint. Delivers! only issue is that the lower thread is ... October 25, 2016 Delivers! only issue is that the lower thread is a little too short. had to use a large rubber gasket to make it work. Bought to use with a bidet and it does it's job nicely. October 5, 2016 This is a hard review to post for something so simple. Either it works or it didn't, really.I got this T-adapter to use with a bidet, as the one that came with the bidet was plastic and felt like it was going to snap off the bottom of my toilet. For the purpose I got the T-adapter, it works perfectly. It is sturdy and the pressure control valve is easy to use.My only criticism is the smooth edges on the top portion that connects to the toilet tank. It made it tricky to get tight. The cramped area I was working in made it difficult to get a wrench in there to tighten it. I eventually gave up on the wrench and just hand tightened it as much as possible and hoped for the best. It's been about 2 weeks or so now and there is no sign of leaking so I'm guessing it's good. If something changes, I'll come back and update. It came with a good rubber washer which connects to the toilet flush August 30, 2015 I bought this metal T-adapter as a replacement to the plastic T-adapter that came with the Luxe Bidet Neo 120 (Luxe Bidet Neo 120 - Self Cleaning Nozzle - Fresh Water Non-Electric Mechanical Bidet Toilet Attachment (blue and white)). The package it arrived in was a cardboard box with sufficient protection. The construction of this product is solid. It came with a good rubber washer which connects to the toilet flush. Installing this product was easy, it just replaced the plastic one that came with the bidet Neo 120 box.The finish of this adapter is gloss, so you might want to use plastic tools (a plastic spanner) to install the product without damaging its finish.The knob seems to have a smooth movement to it, however I haven't used it to control the water pressure like some other users have.I have used it for just a week and will update if I have any new information.I bought this directly from KES HILI INC. and am very happy with the experience. (clear communication, good packaging, fast shipping with expected delivery) Four Stars January 17, 2015 It's hard to adjust flow due to it being a ball valve and my water pressure is high. It's still doing fine after about a year. I would have given it 5 stars if not for it being hard to adjust. Also had a leak at the tank valve connection but found out it was a loose bonnet nut and not the washer. The hex bonnet nut is a reverse thread and when I tried to remove it I actually tightened it. | 13% Bumpers for your toilet. October 22, 2017 Working well so far, though I agree with other reviews that the tape that comes with is not the greatest. They were also just a bit taller than the bumpers that were originally on the toilet seat. But, they definitely helped and for the price, they are worth it. The bumpers are very good, however the sticky pads did not hold June 5, 2017 The bumpers are very good, however the sticky pads did not hold. I replaced them with Contact Cement, and all is well. Well worth the money, if you use Contact Cement. Other than the adhesive the company uses could be a bit better the product is good May 12, 2017 One of the large bumpers came off shortly after putting them on and I'm guessing was flushed because I never found it. Other than the adhesive the company uses could be a bit better the product is good. Sticky problem March 10, 2017 Work great but the sticky backing that came with the product was not strong enough to hold in place - had to use glue. Size and shape are perfect for the new bidet. Used these with a luxe bidet. I've already had ... February 26, 2017 Used these with a luxe bidet. I've already had to fish them out of the toilet twice. Have some rubber cement or replacement adhesive tape ready to install them with. I imagine they are perfect if you have a bidet December 17, 2016 Ok, so to be fair, I bought these as weight displacement bumpers for a new toilet seat I purchased after my rather ample bottom snapped ours. They are a fraction of an inch higher than the default bumper on the seat. So the seat sticks up a little until weight is put on it. I imagine they are perfect if you have a bidet, to make up for the gap. I guess a bidet might be in my near future... all in all, my seat feels a lot more solid on the bowl now. | 14% There are no reviews yet | 0% There are no reviews yet |
| ||||
Three Star Reviews: | 4% KES Solid brass T-Adapter August 4, 2016 I order 4 pieces, 3 ok - 1 damagenow i have to find time to return the damage item I don't doubt that this is a good product but it didn't work for me December 25, 2015 I don't doubt that this is a good product but it didn't work for me. Currently sitting in storage. When installing my bidet, I tried this one first. Water everywhere no matter what I did. Finally, just tried the plastic one that came with the bidet and it's working just fine. Been handling flushes for a month. I'm sure this is a case of everyone's toilet situation being different and me not exactly being a handyman/plumber who has done this before on multiple occasions. That's my honest review though. Works alright November 3, 2014 This works ok . Had a tough time with the leaks but keep checking often to make sure it's not leaking . This should not be sold separate but with the bidets . Fits to US toilet tanks May 1, 2014 you wan to make sure that your toilet connector has a flat rubber washer to avoid any water leak from the water supply hose opening. | 15% Be sure you actually need this before ordering.... MUCH smaller than I expected and attach using adhesive strip... September 17, 2017 Bought to use with bidet kit. Didn't end up using them. Not necessary after all. Seems attachment with adhesive strips may not be the most sanitary version of attachment... not sure though what the alternative would be - using screws? More holes would be more areas for bacteria to hide.... Not the best adhesive. September 6, 2017 "They're okay" seems about right. The problem is that the adhesive just isn't good enough. It'll last for awhile and, if you use some glue, you can probably get plenty of use out of them; but if you depend on the included adhesive you'll eventually hear a splash and see that one of these has somehow ended up in the drink. Needs stickier adhesive... August 29, 2017 They do what they're supposed to but they don't stick for very long. I've had to replace the original tape that came with it several times now. Would be nice if there was a product that stuck well to the toilet. Ok but doesn't stick. June 6, 2017 Perfect height but they won't stick. Just kept coming apart from the doubled sided tape no matter how much tape was replaced. A plumber of 43 years. May 10, 2017 They work fine on a solid seat. Today's seats are thin and have built in bumpers. These will not adhere to the manufacturer bumper. They are too small. The underside of the seat must be flat. Worked fine. so far cleaned tolet lid with cleaner and ... May 1, 2017 Worked fine.so far cleaned toilet lid with cleaner and let dry.Revised: 06/09/17 You had better have Gorilla Glue if you expect theseto stay stuck to the lid. | 3% There are no reviews yet | 0% There are no reviews yet |
| ||||
Two Star Reviews: | 5% Short connection to Water Supply hose makes it difficult to seal. May 9, 2017 I am returning this since the threaded length to connect the water supply hose is too short. This will prevent the water supply hose seal from compressing and will result in leaks. Leakage from shut-off valve January 4, 2016 This would have been a great T-adapter where you could control the water pressure for the bidet spray. Unfortunately after hooking it up I noticed leakage from the shut-off valve. I'm not sure if I received a faulty one or if others had the same issue. Leaked November 18, 2015 I couldn't get a solid seal no matter what I tried. Water leaked out of the connection between the wall and this valve. Seems like it could use a rubber o-ring inside. I waited until after the return period before attempting to hook this up so now I have a small metal paperweight. The chrome finish is nice, but to bad it was not functional January 27, 2015 Top female connector was too short to bottom out into washer. Handle falls off, and there is no way of tightening it down (no set screw). The chrome finish is nice, but to bad it was not functional... at least for me. does not control flow very well December 28, 2014 It's OK if all you want to do is turn the water OFF or ON, but if you want finer control of the flow/pressure, it does not work very well. So, I replaced it with a similar product - Luxe Metal T-adapter with Shut-off Valve, 3-way Tee Connector, Chrome Finish, for Luxe Neo Bidets (Shutoff Valve T1516) which seems to do a better job of flow adjustment - and the price is comparable. but I was very disappointed after installing it that it leaked all over the ... December 23, 2014 I too bought one of these to be able to regulate the pressure to my bidet, but I was very disappointed after installing it that it leaked all over the place. Fiddled with it for about 30 minutes before concluding (as other reviewers have) that the rubber gasket is pretty much worthless and will need to be replaced before this adapter will work. It's a little irritating because I installed the cheapy plastic T adapter that came with my bidet in about 5 minutes and had no issue with leaks.Bottom line, when I buy something I don't expect to have to fix it by making a trip to the hardware store for better materials. | 13% Only 1 left 6 months later October 30, 2017 1 remaining in place after 6 months. Bought these because it was a suggested item with my bidet. My bidet is awesome. These bumpers though don't stay in place and I'm lucky 1 remains where I placed it. That's probably the most crucial 1. This is a good concept but it needs to be stickier because they ... July 15, 2017 This is a good concept but it needs to be stickier because they fell off after one day and I had to reinforce it myself. does the job for a week or so May 22, 2017 The glue or the sticky side doesn't work..... the bumpers fell after two weeks of use... Does not stick well! May 20, 2017 Not happy at all with this. One side unstuck after a month and got flushed down. The only reason I didn't give them one star is that it is a great deal. ... plastic material is so hard that it doesn't seem like it does anything different than the toilet seat hitting April 23, 2017 The plastic material is so hard that it doesn't seem like it does anything different than the toilet seat hitting. Plus they're large and too bulky. Adhesive issues April 16, 2017 The product Adhesive is very disappointing.. Will not hold for long period of time | 1% There are no reviews yet | 0% There are no reviews yet |
| ||||
One Star Reviews: | 15% Looks great works terrible July 20, 2017 No matter what I did it leaked from the top. I've got tons of tricks but none worked finally figured send it back try another. And to the person who said why would you need a washer. Shouldn't but it came with only a flat washer not a built in one that is needed to attach to the toilet feed. Tried it with without and all sorts of ways. Not well made. Almost 18% failure rate. That's junk in my Book! Leaked badly. Sprayed water all over my bathroom... May 17, 2017 I installed this correctly and tightened everything down properly. When I turned the water back on, it sprayed water out of the bottom of the nut. I would suggest getting one local so you can swap it out easier. Also worth noting, but there was no documentation included -- it wasn't needed, but the brand I bought at the big box store had a small warranty card in the box. I bought this item to use with my Superior Bidet Standard and it is too large to be ... January 21, 2017 I bought this item to use with my Superior Bidet Standard and it is too large to be useful. It was recommended and it should not have been. I do not like to spend my money unwisely and this purchase was a waste of money for what I wanted to use it for in my home. Other than that, it is heavy duty and will probably work for some house other plumbing project. I just do not have one for it at this time. Unusable - leaks profusely October 8, 2016 Leaks from the tank connection, behind the gasket and threading (defect). Not really worth the hassle of returning, unfortunately. Seems I'm unlucky as some other reviewers, but others were fine *shrug* This adapter feels solid and looks great, but leaked immediately when I installed it September 26, 2016 This adapter feels solid and looks great, but leaked immediately when I installed it. I tried using plumbing tape, which helped a little bit, but still a small amount of water leaking consistently from underneath the top nut. Same Issue as the rest August 27, 2016 I should of read the bad reviews, I've been working furiously for 2 hours thinking it was my supply line. so I drove to Lowes, bought a new ine and replaced it, I spent 6 bucks more and still leaking from the top nut. I replaced the washer too thinking maybe that was defective. Same issue, asking for my refund, hope I get, it. | 23% No sticking power July 23, 2017 They did not stick from the very first day I tried to stick them on underneath the toilet seat. I tried several times and nothing. The stickers that they provided wouldn't even stick to my skin. They fell in the toilet and I had to go fishing for them. Forget it May 25, 2017 Well, not only did it not fix the problem of the space, after two weeks one of the bumpers on each of the two bowls, fell into the toilet and got flushed. Threw it away. It does not stick for long. Use Spacers instead of Bumpers February 25, 2016 There's a simpler, much cheaper, and longer-lasting alternative to using these bumpers to close the new gap at the front-end of the toilet seat created by inserting the bidet attachment under the back-end: for $1.50 I bought a pair of 1x3/8x3/8" spacers through which I inserted the two screws that hold the seat to the toilet bowl. The spacers were placed between the bidet and the seat. This changes the angle of the seat so the front of the seat is resting on the toilet again instead of being cantilevered with a gap above it. Nice bumpers, bad choice of adhesive pads! June 2, 2015 I read the reviews and thought, I will make this work. Two days later, three of the four are gone. I carefully cleaned both surfaces and made sure to only stick them once and put a lot of pressure on them to get good contact. They seemed like they were going to hold up well, but one was gone after the first day and two more on the second day. The worst part is that they must have ended up in the bowl so they can't even be reattached somehow. The bumpers are good quality, but the adhesive pads are not strong enough for this application. If you buy them, I would use some other method of putting them on. So the end result is that this is a useless product -- unless you buy your own superglue to ... December 29, 2014 The glue which is supposed to make it stay in place doesn't work.So the end result is that this is a useless product -- unless you buy your own superglue to stick it -- else tell the seller to stick it. Dont waste money on this product. September 22, 2013 I have never given 1 star to any other product here in Amazon. But I had to give a low rating as I don’t think this product is ready for use. I have a plastic toilet seat and so I didn’t want to buy bumpers with screws. I decided to use this product that sticks to toilet seat. The package contains 4 bumpers as shown in the product photo’s and a rectangular adhesive tape with bumper shape perforations. One side of the tape sticks to the bumper and the other side goes on to the toilet seat. The tape adhesive is of poor quality and cannot hold the bumpers. 3 of the 4 bumpers came off in less than a week. The tape is still sticking to the seat but the bumpers are gone. | 2% There are no reviews yet | 0% There are no reviews yet |
Vote for Me | Vote for Me | Vote for Me | Vote for Me | |
Pricing info | ||||
Old Price | ||||
Old Price | - | - | - | - |
Price | ||||
Price | $9.50updated: Mar 13, 2020 | $6.22updated: Mar 17, 2020 | $37.99updated: Mar 8, 2020 | $37.99updated: Mar 8, 2020 |
Features | ||||
Answered Questions | ||||
Answered Questions | - | - | - | |
Article Number | ||||
Article Number | 0700254483894 | 7336117823953 | 7241870656543 | 7566908090763 |
Binding | ||||
Binding | Tools & Home Improvement | - | - | - |
Brand | ||||
Brand | Kes | Danco | LUXE Bidet | LUXE Bidet |
Color | ||||
Color | Chrome | N/A | Blue | White |
Currency | ||||
Currency | - | USD | USD | USD |
Height | ||||
Height | 90.6 in | 218.9 in | 118.1 in | 118.1 in |
Label | ||||
Label | - | Danco, Inc. | LUXE Bidet | LUXE Bidet |
Length | ||||
Length | 220.5 in | 23.2 in | 531.5 in | 531.5 in |
Manufacturer | ||||
Manufacturer | KES Home (U.S.) Limited | Danco, Inc. | LUXE Bidet | LUXE Bidet |
Model | ||||
Model | - | 10062 | Neo 185 | Neo 185 white |
MPN | ||||
MPN | K1018 | 10062 | Neo 185 | Neo 185 white |
Number of Parts | ||||
Number of Parts | K1018 | 10062 | Neo 185 | Neo 185 white |
Product Group | ||||
Product Group | Home Improvement | Home Improvement | Home Improvement | Home Improvement |
Product Type | ||||
Product Type | PLUMBING_FIXTURE | PLUMBING_FIXTURE | PLUMBING_FIXTURE | PLUMBING_FIXTURE |
Publisher | ||||
Publisher | KES Home (U.S.) Limited | Danco, Inc. | LUXE Bidet | LUXE Bidet |
Quantity | ||||
Quantity | 1 | 1 | 1 | 1 |
Reviews | ||||
Reviews | ||||
Score | ||||
Score | 8.4 | 6.4 | 9.4 | 9.4 |
Size | ||||
Size | - | EA | - | - |
Studio | ||||
Studio | KES Home (U.S.) Limited | Danco, Inc. | LUXE Bidet | LUXE Bidet |
Title | ||||
Title | - | Danco 10062 Toilet Seat Bumper Kit, 4-Piece | Luxe Bidet Neo 185 Elite Series Fresh Water Non-Electric Mechanical Bidet Toilet Attachment with Strong Faucet Valves, Metal Hoses, and Self-Cleaning Dual Nozzle, Blue and White | Luxe Bidet Neo 185 (Elite Series) - Self Cleaning Dual Nozzle - Fresh Water Non-Electric Mechanical Bidet Toilet Attachment w/ Strong Faucet Valves and Metal Hoses (white and white) |
Warranty | ||||
Warranty | - | - | 18 month warranty18 month warranty for bidet and its accessories | 18 month warranty for bidet and its accessories |
Weight | ||||
Weight | 2.1 oz | 0.1 oz | 6.4 oz | 8.8 oz |
Width | ||||
Width | 192.9 in | 116.9 in | 275.6 in | 275.6 in |
Feature | ||||
Feature | Strong brass body and ceramic valve with beautiful chrome finish, for smooth and reliable operation Shut-off Valve gives ability to turn off or reduce/adjust the water pressure coming into the bidet Ideal for households with children (bidet can be Size of 15/16 Compatible with most Bidets | Used for toilet seat repair Fits any brand and model of toilet seat Attches to toilet seat with custom-fit adhesive pads Includes 2 seat bumpers Easy to install | Sleek Design & High Quality Parts - Upgrade your bathroom with Luxe Bidet's beautifully designed bidet attachments, featuring chrome-plated water pressure control knobs for a more elegant look. We use high quality parts that are built to last making Luxe Bidet an excellent value for the price. Neo 185 is constructed with high-pressure faucet quality valves with metal/ceramic core and braided steel hoses instead of traditional plastic. Feminine Wash - Equipped with dual nozzles for rear and frontal wash. The frontal or feminine wash is gentler than the rear spray. It can be useful for monthly cycles and is highly recommended by new or expecting mothers. Sanitary Protection - Self-cleaning feature sanitizes the nozzles and retracts when not in use for maximum protection. The bidet also features a convenient movable nozzle guard gate for extra protection and easy maintenance. Quick and Easy Installation - Includes everything you need including tools to get your bidet up and running in minutes. Easily attaches to and detaches from any standard two-piece toilet. Warranty & Service - Bidet includes an 18 mo. warranty and free extended warranty when you register your bidet online. We provide full customer support anytime you have questions or concerns. | Sleek Design & High Quality Parts - Upgrade your bathroom with Luxe Bidet's beautifully designed bidet attachments, featuring chrome-plated water pressure control knobs for a more elegant look. We use high quality parts that are built to last making Luxe Bidet an excellent value for the price. Neo 185 is constructed with high-pressure faucet quality valves with metal/ceramic core and braided steel hoses instead of traditional plastic. Feminine Wash - Equipped with dual nozzles for rear and frontal wash. The frontal or feminine wash is gentler than the rear spray. It can be useful for monthly cycles and is highly recommended by new or expecting mothers. Sanitary Protection - Self-cleaning feature sanitizes the nozzles and retracts when not in use for maximum protection. The bidet also features a convenient movable nozzle guard gate for extra protection and easy maintenance. Quick and Easy Installation - Includes everything you need including tools to get your bidet up and running in minutes. Easily attaches to and detaches from any standard two-piece toilet. Warranty & Service - Bidet includes an 18 mo. warranty and free extended warranty when you register your bidet online. We provide full customer support anytime you have questions or concerns. |
Comparisons by Other
Users
SmarterFresh Hand Held Bidet...
Brondell CSL-40 CleanSpa Luxury...
KES® K1018 Solid Brass T-adapter...
KES I8150 Bathroom Replacement...
Sumnacon™ G1/2" Full Brass...
XVL Bidet Sprayer For Toilet...
MODONA HD14-A Premium...
Dailyart Hand Held Bidet Sprayer...
T-Adapter w/ Water Pressure...
Sumnacon™ 1/2" IPS Male & Female...
Sorry, there's no review at this time. Try changing the filter or leaving one.
Share your opinion