5 items
| Compare | |||||
| Compare All Features Differing | |||||
Side by Side Comparison of: TruBuilt 1 Automotive vs Torin Jack vs Pro Lift vs Dr.Roc vs Bowoshen
| Learn More | |||||
Learn More | |||||
Rating info | |||||
| eComparisons Score | |||||
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users | 9.2 | 8.6 | 8.2 | 9.6 | 6 |
User Rating (Amazon) | |||||
User Rating (Amazon) | |||||
 | |||||
Five Star Reviews: | 79% NO MORE STRUGGLING TO JACK UP CAR. January 17, 2017 This is a fantastic addition to any ones scissor jack.I bought this for the wife and had to invest in a couple of 3/8 drive extensions, adapter to 1/2", swivel to plug into jack adapter and a long handled ratchet. I was reluctant at first but after letting her try out the set up I have no regrets. This made jacking up the car very easy. Using the adapter in the manner described I would highly recommend purchasing this adapter! Bob S. Screw Jacks are hard to use at the best times, being disabled September 25, 2016 Screw Jacks are hard to use at the best times, being disabled, unable to get down on the ground, makes it much worse. With this adapter, I can raise and lower any car with cordless drill/driver easily. I love this thing, and mounting it onto the jack took 60 seconds. Maybe. Works great with 2013 Kia Optima (no longer need crank handle) March 4, 2016 Bought a 2013 Kia Optima, and the tire jack's crank handle was missing; therefore, purchased this adapter. This adapter fits [my] 2013 Kia Optima factory lug wrench, so there is no longer any need for a crank handle. The adapter can remain attached to the tire jack and fits fine in the Styrofoam holder, which holds the tire jack components. I used a little Loctite on the bolt threads when attaching, and I used an x-acto knife to cut out a little notch for the jack [with adaptor] to fit flush in Optima's tire jack holder. Perfect product does exactly what it claims November 22, 2015 The jack toolkit for my Toyota Tundra disappeared (kids) but I still have the bottle jack. The Toyota toolkit is way overpriced. I bought a Nissan Titan toolkit to lower the spare and this little device so I can drive the bottle jack with a socket driver. All told $40 bucks instead of $130. Perfect product does exactly what it claims. Makes jacking the car up using the impact gun much ... September 28, 2015 Makes jacking the car up using the impact gun much easier which means less time on the side of the road. Five Stars August 31, 2015 Works exactly like described. I like that it's a strong, Heavy duty item, will last a long time. | 61% Good buy September 18, 2017 I used this to jack up my Honda that was sitting in dirt with a completely flat front tire. It made other jacks inoperable because of the clearance. I even had to return one that I had purchased at ACE locally because I couldnt fit it under the frame. Its not alot of fun, but it was a bargain and does the job. No complaints here. this is several times nicer to use then what comes ... September 12, 2017 this is several times nicer to use then what comes with most cars. handle is easier to use and the foot is riveted on instead of just tack welded. This is the jack you throw in the tool box and don't cry over if it grows legs, it gets the job done, and its cheap. Unusual for scissor jacks June 21, 2017 Due to health we needed to lift the head of a queen bed. We placed one scissor jack on each side of the metal frame of box springs at the head where there was good support, then jacked each up to the same height. and this thing cranked my toyota yaris up and down like a champ April 24, 2017 Arrived much faster than expected. It was a little stiff the first time or two I tried it, but a few days after I bought it I had to replace the water pump on my engine, and this thing cranked my toyota yaris up and down like a champ. The base is larger than usual, which gives it more stability, but it still fits in the jack compartment of my car. Easy to use. The only note I'll make is that the saddle on top gets scratched a bit lifting the car up and down, but for the price it is a great machine. Great price, great product April 1, 2017 Much smoother than the factory triangular jack that came in my car. This jack breaks down just as small as the one that came in the car yet it is much stronger. Jack is very stable when using. Overall great price for the product. Recently bought a car that didn't come with a jack ... March 2, 2017 Recently bought a car that didn't come with a jack, so I bought this one in case of emergencies. Within a month I had to pull this jack out because of a flat tire and it worked well. | 53% Easy to use, worked well July 19, 2017 bought this to change a flat on my boat. It is simple to use and worked very well. Raised the tire up to a height where I could easily pull it off and replace the flat. Five Stars June 18, 2017 Solid construction. I put this in my car when I learned that my stock one was completely rusted over. Five Stars April 9, 2017 great standard scissor jack. i really like the larger base for added stability Tight Squeeze March 16, 2017 I have a very low profile car. 4.5 inches from bottom of frame to pavement. This jack does the job. Great jack for the money November 15, 2016 I've used it to set up my fifth wheel RV and it worked well for that, I also used it on my Acura MDX to make sure it would lift it off the ground to do a tire change, had to add a 3 inch block of wood, but the jack works well! | 85% There are no reviews yet | 0% There are no reviews yet |
 | |||||
Four Star Reviews: | 12% Solis and sturdy... January 11, 2017 Very sturdy and solid...fit onto my jack easily and does a good jpb, and in favor is that you can use a standard 4 way lug wrench on it as well as a 1/2 inch ratchet drive... Only issue I have is that it seems a bit pricey, but I could find no alternatives... works very well and is very necessary to operate this ... August 29, 2016 works very well and is very necessary to operate this scissor jack especially when it is used with a long bar breaker socket wrench. fit well for the scissor jack I bought, March 15, 2016 fit well for the scissor jack I bought, haven't used yet but can see how it will speed the process | 20% but I am satisfied with the product May 19, 2017 Not got to use yet, but I am satisfied with the product. Good jack for very little money. September 29, 2016 For so little money this is quite a decent jack. The only reservations are that the handle joint is rather stiff and takes more effort to unfold than operating the jack, and the angles could be better for ergonomics. We use it not only to raise our car but for house repair projects as well. Very handy to raise a cast iron laundry sink into place and for installing a large garbage disposal under the kitchen sink. Good replacement for the junky jack that came with my car. August 23, 2016 The piece of junk scissor jack that came with my car failed when my car rolled while trying to change a flat. The old jack was bent over and twisted up. This jack is far more robust and not much bigger. It does have the larger footprint that others have reported (as opposed to the picture). This looks to make it more stable. For the price, this is a fine replacement for my busted jack. Crank is too short February 7, 2015 Pretty descent quality.Only complaint is the handle crank is too short to allow it to unfold fully away from the bottom of the trailer. To unfold it to crank, you are still under the trailer and there is not enough room to crank.I did apply grease to the threads of the rod and ran the jack up and down. I wanted to make sure the threads don't corrode when the jack is in place for a while. Big and bulky April 23, 2014 Very serious jack, but not as pictured. The bottom plate is 15 inches long and 4 7/8 inches wide. Probably far too big to fit in the "jack area" in anyone's car trunk. Folded up it is 17 1/2 inches long by 4 7/8 inches wide by 3 3/4 inches high. The small "platform" on the top is 2 3/4 inches long by 1 3/4 inches wide. | 18% Good value for light duty use. June 22, 2017 Selected this jack for it's large footprint. I use it under an RV stairs-set to reduce rocking of the "house" during exit and entry. It feels like it's not well-suited for heavy duty automotive use but for my application it works well and was sold at a reasonable price. For softer terrain, I'm carrying a few bricks to put under the jack; may change to a large (2"' x 10'" x 24" ) plank.I'd have given 5 stars except the cranking bar setup is clumsy to operate. Nonetheless, it does the job once you get used to handling it. A Better Scissor Jack November 14, 2016 I picked this jack to replace another scissor jack that came with my old Dodge pickup. That old jack broke the first time I tried it out and I picked this one because of the singularly large foot. It should have a chance of standing up on unpaved ground without sinking too much. You don't always have a piece of 2x8 to put under the jack.The one disappointment is that the jack handle is short. It would be adequate for most cars but is too short to reach easily under the rear axle of a pickup truck. Also, the jack screw has an eyelet connection for a hook on the end of the jack handle. I have looked for a long jack handle with a hook end and can't find one. The original jack handle that came with the Dodge pickup is long enough but has a different connector end. If I can find a blacksmith to heat it up and bend a hook on the end I'll be happy. Good emergency jack December 21, 2014 Works well enough for a emergency jack, I hate the jacking mechanism! Way heavier duty than the crappy jack that came with the car. | 13% There are no reviews yet | 0% There are no reviews yet |
| |||||
Three Star Reviews: | 5% Not easy to use October 23, 2016 While this adaptor was a good idea to help speed up extending a scissor jack, it's usefulness in actual use was not so great. I've used it on two occassins and was not able to get the screw to stay on tight to the scissor jack. After a few seconds of rotating the adapter with a power drill, the adaptor would slip and not stay parallel with the jack. Once this happens, the misalignment causes the jack to wobble uncontrollably in all directions. I ended up needing both hands to keep the alignment straight. The screw remains tight but just cannot withstand the twisting. would be great for small scissor jack August 25, 2015 would be great for small scissor jack, not made for larger models bolt was too short to fit my jack but it was easily solved. Good quality other than that. Fast Shipping! | 8% It's a pretty good jack for 18 June 21, 2017 It's a pretty good jack for 18.00 - can't expect too much for $18.00, sotop your whining and just use it! About the price it is.. May 30, 2017 About what I expected. Kind of heavy for its size to use as a temporary jack. OK, not the toughest May 21, 2017 Fell down once - not all that stable for heavy use, but if you use jack stands, it will probably still last you quite a few uses. Stay on level ground. Nice jack, hand crank needs work August 6, 2016 This is a simple, sturdy jack. the problem is the metal hand crank. They really should have put a sleeve of some sort around the base. You turn it with one hand, and then hold the base with the other. Since there is no sleeve, the friction between your hand and the metal makes it difficult to turn. This small feature would have made the product better. OK Light Duty Jack December 1, 2013 For what I bought it for it was fine. but for lifting anything more than a very light car I doubt it. Forget a full sized truck or a big car. Light stuff is fine and it works well for that. Not a regular use quality however. | 16% It is a great jack for occasional use and unlike typical floor jacks July 14, 2017 This jack is as advertised. It doesn't have much lifting power until the scissors are about half-way up. It is a great jack for occasional use and unlike typical floor jacks, it will never leak hydraulic fluid!If leaving a vehicle on this jack, definitely use a jack stand with it for safety's sake. Kind of cheap. The legs bent up the first time we used it. June 27, 2017 Rather cheap. You MUST put it onto a flat surface or the legs bend under pressure. Sturdy needs wider base for safe heavy lifting May 9, 2017 Sturdy, heavy duty jack, but needs wider base plate for stability when using for 2000+ loads on uneven surfaces😳Unexspcted surprise. A better, much longer jack handle please! October 29, 2016 Used under a 5'x8' utility trailer for tire changes, worked well on a hard surface (concrete pad). Handle, like most of this type, is ineffective and way too short for safe use in my opinion. But the jack's steel seems to be a slightly heavier gauge than others as is reflected in the weight rating. I bought an adapter and a long 1/2" drive ratchet extension for use. These add-ons cost as much as the jack!I'd be leery using it as is under a trailer on uneven or soft ground as you'd have to have too much of yourself under the jacked vehicle. This is typical for all scissor jacks that have to go under an axle, that I've seen in this class, and not just this one. Chheap price, cheap quality October 26, 2014 Not what I would call quality by any stretch of the imagination. Hard to get started and the handle is difficult is close spaces. I'm sure the quality could be a lot better. Guess I got what I paid for. | 1% There are no reviews yet | 100% There are no reviews yet |
| |||||
Two Star Reviews: | 2% 1/2" Drives Won't Fit June 15, 2016 The concept here is great however none of my 1/2" drives will fit ... I've seen the other reviews saying that it fits for them so maybe mine just wasn't machined properly. Either way, not a good QA/QC process in place. Yes, I can use a 13/16" socket but thats another small tool I have to carry around in the vehicle and hope it isn't lost when I get a flat. | 3% Sturdy looking but handle broke out of the box November 4, 2017 The jack itself looks very sturdy and reliable but the folding handle is junk. It's a two piece handle joined at the hinge by a large rivet. When I attempted to open the handle or extend it, it was very tight and the rivet ended up snapping and making it useless. I did return it for a refund so no problems with customer service and will look for something else. Only reason I gave it a second star was because the jack itself appeared to be sturdy and useful for what I was needing. Two Stars February 15, 2016 Not that impressed with the short handle. I found it hard to work once under pressure. Okay not good December 27, 2015 It is okay. I used it 3-4 times. Its base is bent. I see a crack as well on one end. My car weighs 1.5 ton. Not a good jack for challenging situations November 14, 2015 I want to have a compact, strong and easy to use jack available in our garage for 5-6 times a year for various tasks for our three vehicles. I've no inclination to do any major mechical work with the cars but when I need to get one up, usually for tire changing, I want a dependable lightweight jack available to go in place quickly and know how it's going to work. With those considerations in mind, I bought the Torin T10152 scissor jack (1.5 Ton) last spring.The Torin was put to it's first real test this past weekend when the starter died on the vehicle we are replacing. I'd not had a chance to switch the basically new tires on the old vehicle to the better rims of it's replacement, and switch the worn tires to the rims on vehicle to be sold. So the task requires two jackings for each wheel on the vehicle to be sold.The Torin didn't fare well. Given that the car won't move, this task needs to be done in our driveway, with a slight but notable slant a bit of a drop off left-right. The Torin did fine on the more even side of the vehicle but when I started jacking on the other side, the Torin began to tip because the ground was softer than expected. (My mistake for not checking the surface more carefully and putting down a board.) The ground surface is not the Torin's problem of course but when I got another jack under it, the Torin's base had bent significantly. A sledge hammer put it back in place to make it functional but I bent the other end of the base when I ran into more soft ground on another tire. (This time with a board under it.)I Had to the work with the car as it lays, so this task did put some exceptional pressure on the Torin and it didn't do well. Aside from the base bending, at one point I had to try and crank it at an odd angle and ended up unable to get it as high as needed it to be because I couldn't move the handle at the angle. The crank design doesn't provide for much power. (The stock one in our Honda van has better general crank design.)Generally, this jack seems OK for straight-forward lifting on a reasonably flat surface. The price is good and for most simple situations it should be fine. For myself, I'll only use it now in limited situations and will probably recycle it in the future when I find a better replacement. Two Stars February 3, 2015 lacks a notch in the middle so it causes the metal on the car bottom to bend. the jack is coming apart, November 4, 2014 the jack is coming apart, the spot weld broke and i had to weld it to keep it from moving on me | 9% Broke the handle on first attempt at raising the front ... July 2, 2017 Broke the handle on first attempt at raising the front end of a Jeep Cherokee. Maybe it will work on a much lighter car. Bad crank system renders this useless April 19, 2017 The crank system used on this jack is terrible; you can't get a proper momentum without scratching your knuckles on the ground and without constantly repositioning the handle. I'm comparing this to the mini emergency jack that came with my car which is extemely easy to operate and requires no effort. I wanted something more 'substantial' to do wheel changes but it's going back. I can lift the car in 30 seconds or less with my OEM crank; it takes forever using the Pro-Lift and requires much more effort due to the abysmal crank system. | 1% There are no reviews yet | 0% There are no reviews yet |
| |||||
One Star Reviews: | 2% I am giving this a one star, not because ... September 23, 2016 I am giving this a one star, not because of an inferior product, but an inadequate or misleading description. The item is described as a 1/2" adapter, so I "assumed" the 1/2 inch applied to the interface to the Jack. I assumed wrong, the Jack interface is only 3/8 inch. I returned the item, since it did not fit my Jack. Cheap junk! DO NOT BUY! March 18, 2016 Absolutely horrible! DO NOT BUY!!Nothing 1/2" will fit into the socket. It's a cheap piece of junk. | 8% bolt stripped already, I would send it back but ... September 6, 2017 bolt stripped already, I would send it back but I used it already. Not what I was hoping for Used this for the first time after having it for ... July 21, 2017 Used this for the first time after having it for over a year. Seems very unstable, and would not jack up my car. The handle bent instead of raising the vehicle. I will be replacing it with a different product. teeth never lined up October 28, 2016 poor quality control. teeth on bottom never lined up and bent when trying to cycle the jack. otherwise would have probably been a decent jack. wasted money and too cheap to worry about returning. Trying to operate this jack is as frustrating as trying ... July 23, 2014 Trying to operate this jack is as frustrating as trying to push a rope up a hill.There is no offset in the handle to get the tremendous torque required to turn the screw. It's simply a straight rod with a short 90 degree bend at the end. That short bend is what you have to grab in order to operate this jack. Unless your wrist rotates 360 degrees, you can get 1/2 of a turn before you have to release your grip and reposition.While repositioning your hands to try to get enough leverage, the hook on the end of the handle keeps popping out of the hole in the jack screw. The instructions should say, "Insert hook, rotate 1/2 turn, reposition hand, rotate 1/2 turn, cuss, reinsert hook, repeat as necessary.I tried raising the tounge on my little pop-up and gave up. The jack is laying under some bushes until I decide to throw it away or try to find a different handle. | 4% I received a USED jack! July 27, 2017 I received a moderately USED jack that showed significant evidence of prior usage including heavy scratching in the area that actually comes into contact with the vehicle. There was also significant grease with debris in the grease on both ends of the jack.The first tip off was that the product's box showed significant abuse and was damaged in numerous areas and the shipping box was undamaged. the top of jack has some of the paint on the ends scratched down to the metal along with some dirty residue. June 15, 2015 The jack does not look as advertised and does not work well. The jack binds when cranking it down and won't crank down all the way without forcing it, the top of jack has some of the paint on the ends scratched down to the metal along with some dirty residue. | 0% There are no reviews yet | 0% There are no reviews yet |
Vote for Me | Vote for Me | Vote for Me | Vote for Me | Vote for Me | |
Pricing info | |||||
Old Price | |||||
Old Price | - | - | - | $25.99 | - |
Price | |||||
Price | $26.00updated: Mar 15, 2020 | $24.97updated: Mar 19, 2020 | $22.94updated: Mar 18, 2020 | $13.99updated: Mar 13, 2020 | $24.14updated: Mar 19, 2020 |
Features | |||||
Brand | |||||
Brand | TruBuilt 1 Automotive | Torin Jack | Pro Lift | Dr.Roc | Bowoshen |
Currency | |||||
Currency | USD | USD | USD | USD | USD |
Height | |||||
Height | 39.4 in | 372.0 in | 209.1 in | 64.2 in | 155.1 in |
Length | |||||
Length | 82.7 in | 1038.6 in | 697.6 in | 82.7 in | 775.2 in |
Manufacturer | |||||
Manufacturer | TruBuilt 1 Automotive | Torin | Pro-Lift | Dr.Roc | Bowoshen Factory |
MPN | |||||
MPN | T1A12SJA | T10152 | T-9456 | DR-25097 | bsn00054 |
Number of Parts | |||||
Number of Parts | T1A12SJA | T10152 | T-9456 | DR-25097 | bsn00054 |
Product Group | |||||
Product Group | Automotive Parts and Accessories | Automotive Parts and Accessories | Automotive Parts and Accessories | Automotive Parts and Accessories | Automotive Parts and Accessories |
Product Type | |||||
Product Type | AUTO_ACCESSORY | AUTO_ACCESSORY | AUTO_ACCESSORY | AUTO_ACCESSORY | AUTO_ACCESSORY |
Publisher | |||||
Publisher | TruBuilt 1 Automotive | Torin | Pro-Lift | Dr.Roc | Bowoshen Factory |
Quantity | |||||
Quantity | 1 | 1 | 1 | 1 | 1 |
Reviews | |||||
Reviews | |||||
Studio | |||||
Studio | TruBuilt 1 Automotive | Torin | Pro-Lift | Dr.Roc | Bowoshen Factory |
Weight | |||||
Weight | 1.1 oz | 35.3 oz | 0.4 oz | 0.1 oz | 17.9 oz |
Width | |||||
Width | 65.0 in | 751.6 in | 162.6 in | 39.4 in | 372.0 in |
Feature | |||||
Feature | Finally, easily raise, lower and level your scissor jacks with speed never before achieved! For use with 1/2" impact wrenches (drills) or standard drive sockets The perfect accessory for those hard to use loop type or double eyelet type scissor jacks Fits most scissor jacks - For use with 13/16 lug wrench/tire iron or socket or easily add a half inch adapter to any drill 100% Satisfaction Money Back Guarantee. | Built for extra lifting 100 percent factory tested for reliability and safety Minimum height: 3.75inch Maximum height: 15.4inch Easy to maneuver | Features an extra wide base Safe and stable Heavy duty steel construction Long term durability Works great with pro-lift jack stands Extra wide base for extra capacity and stability Lifting range from 3-3/4 inches to 15-1/8 inches 3,000 pound rated weight capacity scissor jack Meets or exceeds the latest ANSI/PALD standards | Lift Your Jack Very Easy:Made Of Very Solid Chrome Vanadium Steel,Easily use with your scissor jack, Suitable to most of loop type or double eyelet type scissor jacks in the market（if you are worry about it's compatibility，please check the oval's size on your jacks） Slot Size: 8.8mm(0.35 inch) wide,23.90mm(0.94 inch) deep;Bolt Length:4.1cm ;Bolt Dimensions:9.7mm Easy to use with the following tools:1) 1/2" drive/impact drills/ratchet or standard drive sockets;2) 13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill;3) If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with lifetime warranty | • Lift range : Minimum height: about 90MM / Maximum height: approximately 360MM • High Quality: The use of high-quality steel, strong bearing gravity, resistance to pressure. • Solid steel shaft, thick plate material of the shaft, easy to rotate, effortless operation. • Groove design, the base and the top with nails reinforcement, the use of more secure and more solid. • Warranty and Service: 3 month warranty which ensures long-lasting enjoyment of your purchase. If you have any problems with our products, please contact us first. We will sort it out for you. |
Comparisons by Other
Users
Eaz-Lift 48830 24" Leveling...
Husky 76862 24 Stabilizing...
Torin T10152 Scissor Jack - 1.5 Ton
4 - 24in. 5000 lb RV Scissor...
Powerbuilt 640819 Mechanical...
Set of 2 5000 lb 24" RV Trailer...
4 Heavy Duty 24" RV Stabilizer...
Camco 57363 Leveling Scissor...
1/2'' Scissor Jack Adaptor by...
Eaz-Lift 48830 24" Leveling...
Sorry, there's no review at this time. Try changing the filter or leaving one.
Share your opinion