Side by Side Comparison of: Aoyue vs Weller

Due to RSI, I purchased an ErgoDox Infinity kit, which meant soldering switches and LEDs myself. It had been over 15 years since the last time I messed around with soldering and half my electronics tools have gone missing through several moves, so I looked around for an appropriate soldering iron at a price that wouldn't hurt too much, in case it only ended up being used once.Using other reviews, I found that the 3 & 1/2 setting is approximately 350°C and worked great with the 63/37 tin/lead solder without having to linger too long on the PCB. Even being so rusty, I didn't damage traces or any of the switches I was soldering on the board - Zealios, which reportedly have a housing more sensitive to heat than the black or milky plastics from Cherry or Gateron switches.Everything went very smoothly with the soldering job and I already have another project lined up since I have some extra Gateron blacks laying around and an inexpensive Tomoko 87 board sitting around waiting to be modded.

I really cant say enough good about this soldering station. I've been continuously frustrated with cheap radioshack style soldering irons, but couldn't afford $100+ to get a "real" soldering station. I've used very nice soldering stations owned by other people before, and I'm really impressed with how well this one holds up.PROS:-The pen is nice and lightweight--so much easier to use than the cheap all-in-one irons.-The station itself is very nice, and the sponge tray is actually made of metal. The solder-holder is surprisingly useful as well-Lots of power. I occasionally work on PCB mounted components, but spend most of my time wiring guitars and other audio equipment with this. It's got plenty of power to solder relatively this ground wire onto the back of guitar pots, but also turns down nicely so as not to lift pads on PCBs.-The included tip is a very nice all-around size. I would like to get a couple more tips in the future, but for now, this one works well on a variety of projects.CONS:-Would be nice if they included one or two more tips, but as mentioned, the included one is a great all-rounder-There is a small LED that flashes when the unit is on, but it would be good to have something a little brighter to make it easier to see.

I have had this for about 6 months now and it has worked flawlessly! I build guitars and had been using a cheap Radio Shack iron for around 10 years. That iron took forever to heat up, it never got hot enough for thick parts like the backs of pots, the stand would always fall over and burn holes in the floor...it was a real POS and I HATED soldering because of it. Last year I started a small custom guitar effect and analog synth building business and it was immediately obvious I could not use my old iron. That would be a nightmare! I needed a good variable setting unit that I could use to solder custom circuit boards as well a guitar internals, both of which require different temperatures. I also didn't want to spend something like $300 on a soldering station for a business that may not last a month. I decided on this unit because it had all I needed at a great price as well as positive reviews......I am SO GLAD I DID! This soldering station has made it a JOY to solder and I LOVE working on circuit boards now! The iron temperature can be adjusted easily so that I can set it depending on the type of part I am soldering. There is a red LED that tells you when it is on and heating up so you don't forget to turn it off. It heats up REALLY quick, ready to solder in a fraction of the time of my old iron. plus it gets HOT and I don't have to hold the iron on a part forever waiting for it to get hot enough to melt the solder. The iron handle is a very nice shape with a rubber boot at the front so it is very comfortable to hold. The tip that came with it is a nice standard pencil fine point but conveniently this iron has a standard tip connection that can be swapped out to any other standard sized tip with the twist of a ring nut. The stand works great and is bolted to a very solid base. I read that some people had trouble bolting the stand to the base but really all you have to do is put both screws on loosely and them tighten them together, moving the stand into the position that you want- don't tighten one screw before you install the second. This actually came with a solder spool holder which works great but because the base is solid so I ended up drilling a few more holes in it and installing additional holders for my wire and electrical tape. When I bought it I actually didn't care one way or the other that it had a metal holder for a little sponge since I had always used steel wool to clean my old iron, but the little metal sponge reservoir is an invaluable tool! It has really helped keep the iron tip in a pristine condition. Unfortunately the sponge that came with it is wimpy so I suggest picking up a better sponge. There is only one thing I wish this had - an actual temperature gauge. Even the temperature setting dial is marked from [1] to [8] not a real temperature. I would suggest using a temperature sensor to find out the actual temperature of the iron at different settings and marking the dial so that you can dial in the exact temperature that you want depending on material used. Not exactly a deal breaker, and an easy fix if you have a temp sensor. That is the one and only negative thing I can say about it!SUMMARY:+ This is a VERY HIGHLY recommended iron!+ Works for both fine electronics and for more heavy duty work.+ Well made, heats very fast and stays even!+ LED lets you know when it is on/heating+ Comfortable handle grip+ Standard tip replacement+ Comes with a base and stand that work great+ Metal sponge reservoir and Solder spool holder are invaluable tools- May need a better sponge- doesn't have a temperature gauge for actual temp settingI have not had a single problem with this and I have used it 5-6 days a week now for 6 months.At this price point it has already paid for itself many times over...if it ever did have a problem I would not hesitate to just pick up another!

This soldering station has worked very well for me. I have bought genuine Hakko tips and they all fit completely with no problems. I changed the sponge for a genuine brass wire sponge (dumped the brass colored steel sponge) holder for cleaning the tips. I have made the station much stronger by securing all of the parts together with JB Weld. Using a medium Hakko pointed tip and a Hakko FG 100 Soldering iron temperature measuring unit I have come up with these average tip temperatures. With the dial set on #1 which is "Low" 250 degrees C or 482 degrees F. Dial set on #2 294 degrees C or 561 degrees F. Dial set on #3 331 degrees C or 628 degrees F. Dial set on #4 365 degrees C or 689 degrees F. Now there is a big gap space between #4 and # 5 on the dial face and the solder tip temperature reflects this. Dial set on # 5 415 degrees C or 779 degrees F (this was the biggest change in temperature between dial numbers). Dial set on #6 430 degrees C or 806 degrees F. Dial set on # 7 445 degrees C or 833 degrees F. Dial set on # 8 which is "High" 467 degrees C or 872 degrees F. Like I mentioned these tip temperatures are the result of the average of 5 tip temperatures on each dial setting going from low to high and then back to low. This was giving 6 minutes heating up and 6 minutes cooling down time between each consecutive measurement. I always keep an extra heating element for this station on hand just in case but have had no need to install the element. I am very satisfied with this unit at the price point it has. Keep the solder tip clean and check the tip lock ring once in a while to make sure it is tight (use a pair of pliers for this, the lock ring will be hot !!!). With this in mind the unit should give you good service. Another hint, I use 4 different diameters of solder and all are rosin core (never use acid core solder or acid flux for electronic work) as the diameters are different the melting temperatures are different adjust the soldering station temperature to match the solder. Solders differ in make up I have 63/37, 60/40, and 58/40 with 2% silver- the melting temperatures of the solder are normally printed on the spool or package. Aloha from Maui.

Wonderful station for the price.I use a WES51 (a $100 Weller iron) at school and I have to say I like this one better. While it's not temperature controlled and doesn't have any special features, its simplicity, reliability, and power make it remarkable. I've been soldering for dozens to hundreds of hours on it, and not once have I encountered a single problem. I'm still even using the same tip. The 60W heater gets it up to temperature in a matter of seconds, as opposed to minutes as cheaper Weller irons and most cheap irons in general would take. The widespread availability of extra parts and tips is a huge plus.Unless you want to try your luck with knockoff Chinese digital stations, I don't imagine there is a better station in the same price range.

This is a first-impressions review - I've not used it yet but I have messed around and I'm impressed.On it's lowest setting it starts melting solder in 50 seconds. I'm sure there's better - but not at this price point. The plastic base is just that - the power supply, sponge tray, solder reel holder and iron stand all mount into the base. All the plastic parts are clear and precisely made - no seams or other plastic flaws to worry about. The power supply simply pushes down on four pegs in the stand - so you can disconnect it from the stand as needed. Excellent build quality - the wire for the iron has a nice high-quality feel to it as well - light and flexible as it should be.Overall a great soldering iron package.

Three very important aspects about this station that spell SAFETY are:1st..... The power buttom on the station itself is very convenient and makes you alert of it being on or off.2nd.... Power control knob that helps you control the amount of wattage/heat on the soldering tip.3rd..... The holder for the soldering tip is right there next to you.This is a very good setup for anyone who does quite a bit of soldering like me. Highly recommended.

I love things that are well made and work the way they should. This soldering iron station has enough of a range to do a lot of the things that I use a soldering iron for. My only recommendation is to buy a pencil tip at the same time you buy this soldering station. The tip it comes with is broad and not as easy to use in tight spaces as a pencil tip.

I use it from time to time as a light duty DIY dude, and it's leaps and bounds ahead of the craptastic radioshanty version I had before. The tip flows solder really well and cleans up really well. Temp control is great and the stand is great as well. Totally happy with my purchase!

This is my second soldering iron and the first soldering station. The first time I tried to save money and bought a $10 soldering gun without temperature settings or a holding station. How wrong I was about trying to save money on a soldering iron. First, you definitely need to have a temperature setting so that you can fine tune it to your application. e.g. Thicker wires require a hotter iron. Also, a big plug is the iron holder. I tried to use the one that came with the $10 iron, which was basically just a metal place with a cut out for a stand. Those things don't stay in place and caused me to burn my fingers more than several times. Before I purchased this guy I also found another one for about $10 less than this one with similar features, however, after looking into it and having used this iron now for a few weeks I say this is definitely worth the month. I also got a Solder Tip cleaning with a brass wool and a tip tinner to complete my setup. So if you're looking to get into soldering and want something that will last more than one use get this!

I use this soldering iron as a hobbyist to solder electronics for use with my Raspberry Pi and Arduino projects. I have found an adjustable-power soldering iron to be a must-have for this type of work. This unit performs well; the provided tip makes surprisingly short work of even some of the more cramped joints I've had to make; and the option to utilize other Weller tips has been helpful.

Intro:This is a really good mid-price range soldering iron that would be very satisfactory for the typical electronics hobbyist, maker, tinkerer, or DIY repairs enthusiast. Please note that this is a *soldering station*, not just a soldering iron, so it is superior to if you are just purchasing a *soldering iron*, which is just the "plug in pencil" part by itself. Weller is a professional grade soldering equipment company, they make soldering equipment that is even more superior to this one, so you can expect fairly high quality out of this soldering station as well.Advantages and features:-Really nice holder for the iron, reducing the chances of knocking it over or off the table during use (safer than cheaper soldering irons).-Nice comfort grip on the iron-You can buy high quality Weller tips to fit this iron of a wide range of shapes/sizes for different soldering jobs-On/off switch so you don't have to unplug it to shut it off. Switch glows when on, to remind you that it's on (good for safety).-The iron plugs into a socket on the station, so you could replace just the iron if it breaks/burns out/gets worn out, probably even with a non-Weller iron.-A nice sponge is included-Station has a nice tray for the sponge-Station has variable heat output with continuous adjustment knob (way better than having just an iron that doesn't have temperature adjustment)-Seems to have plenty of power for doing circuit board electronics soldering. I typically use the 3 or 4 setting, unless I'm soldering big stuff, and then I crank it up to 5, which is the max.Disadvantages to keep in mind, and why they aren't a huge deal:-Though you can adjust heat output, you can't control the temperature directly, and the probe doesn't actively increase/decrease its heat output to hold at constant temperature as you are working with it. But you would have to pay significantly more money to get this feature in a high quality soldering iron like this one.-The soldering iron tip that this iron comes with is a huge chisel tip, and will not be useful to most people who plan on soldering electronics with this iron. You can easily order replacement tips though that are more dart-like, and you'll have to do this as tips wear out anyways.Pro tips:Soldering iron tips are somewhat expensive (about $10 each), because they are one metal plated with another metal. Treat them with respect. Shut the iron off when not in use to reduce high temperature corrosion. Put some solder on the tip before shutting it off to protect it. Use the sponge and/or tip cleaner to keep the tip clean. Avoid the temptation to clean a tip with sandpaper, this will ruin it, because that removes the plating. If your tip starts not working very well, slap in a new one, and tell yourself that it's worth it. Try not to solder onto dirty metals and things not intended to be soldered.Summary/Final Buying Advice:If you are a hobbyist accustomed to using stand-alone soldering irons that have no station, or a cheap station that is just a sponge and a holder, and no switch and knob, treat yourself to this station, and you'll be very pleased. Things will go a lot better for you, you'll be more productive, less frustrated, and this station might even be safer for you to use, since with the stand-alone iron, you can easily knock it over onto your table or floor, and that's not good. This is almost a professional quality station, you can handle the price that it costs, so get it for yourself!!If you are a professional electronics technician, a very ambitious hobbyist, or have a larger budget than I do, you will probably want a temperature controlled iron/station. Expect to pay over double for it if it is of good Weller or comparable quality though. Its key advantage is that it will increase/decrease its heat output to hold a constant temperature as you are doing things with it that suck more and less heat off of it.

Great beginner soldering iron. I can't complain very much since it gets the job done, but I did dock a star because there's no real indicator of temperature.That said: If you're using 60/40 rosin core set it to 6 on the temperature and wait 5 minutes.

Awesome soldering station, however word of caution when you assemble it, superglue the control unit to the stand, as it just lightly sits there on top. Had it fall over/off a couple times when using it. Also the standard tip is ok, but definitely pickup a pack of different tips because its too fat of a tip stock. Don't order the ones that amazon suggests on this page, they are coming straight from china. I ordered them early-mid February, just got them yesterday. Do yourself a favor and order locally.

This station is of very good quality for the price. Aoyue products are actually very reliable and dependable. It performs very well and is quite accurate setting the temperature. I would recommend this to anyone performing general soldering tasks and to hobbyist and beginners.. It will do 99% of your soldering chores with ease and at a very reasonable price. Just get it. You will be happily surprised just like I am.....

I ordered on November 4, 2015. It's now January 21, 2017. I'm not sure it's worth the price at 29.99, maybe if it were on sale for less it would be. Although its done everything i need it to. It just feels cheap. Nothing locks together. It's very light. It all just sort of sits on one another, loosely. Some glue solves this. I wish instead of the 1 LOW - 8 HIGH dial, they used any sort of tempature indication. The missing soldering iron port isn't a big deal, as there's enough space in the case to add one, but it would have been nice to see that for the price imo, because the cord always being attached to the device is annoying and cumbersome. The guts are alright, nothing special at all... maybe my expectations are too high, but after watching various iron teardowns there are cheaper alternatives that beat this with no question for less than 20 dollars. All in all it's okay, nothing special. I feel like the device was designed by someone who's never soldered before in their life. Everything feels like it was an afterthought. I'm giving it 4 stars because it's lasted my abuse for longer than i thought it would.

Nice unit, works well. Heats up much more quickly than I had expected. I am giving it 4 stars instead of 5 stars because it should have had an LED light indicating when the switch is on, so one doesn't leave it on accidentally when not in use. However, I added one (pic included). It's the Blue Sea Systems 120V AC LED right here on Amazon. It's small (11/64" hole), and just the right size for this application. I just found the common & 110V switched wires inside and tapped them for the LED. See pic. My LED looks factory.

I returned it for a 936 model. But, in hindsight, they seem to be the exact same iron. The 936 just has numbers on the heat setting dial, that are just a "guess-timation" of the actual temperature, and this 469 does not. It occurred to me, I could just set the dial where it worked best, mark it with a small piece of tape, and leave it alone.These heat up yo temperature in less than a minute and hold it pretty well.All Hakko tips fit this iron

It's a pretty good backup or beginners station. They only put one screw in to hold the base together instead of the two it was designed for, and the knob is out of alignment right out of the box. I straightened the knob up and it works pretty well. 3-3.5 feels like around 300-350C-ish. Temperature recovery is adequate, but nothing like a temperature controlled iron. If I had paid $100 for it I would be disappointed, but for under $50 it's a killing machine.

I purchased this for my son who is an engineering student. I've used a variety of soldering irons over the years from super cheap ones from Radio Shack, to professional Metcal soldering stations. Obviously, this is not Metcal quality, but for the price it does a very nice job. The fact that you can modulate the temperature is great. It was a bit harder than normal to properly tin the tip, but other than that, it has done well.

I am using this to solder guitar electronics. Have used on 2 guitars with great results. Tip can turn quickly so keep clean and tinned in order to reduce oxidation. It seems consistent heat wise and is a great improvement over cheap pencil type I was using. Again, I use this as a hobbyist, so not sure durability for day-to-day extended use. Would recommend for hobbyist that wants a quality unit with some control. Cord does seem to get in the way at times and can be irritating so just make sure to set it up so it stays out of the way.

For a super novice solderer, such as I, I found it pretty great. It beat this super cheapo soldering iron I bought at a discount store. After my first experience with my cheapo soldering iron, I was very doubtful I'd be able to pull off a 3.5mm repair plug job, but I was able to do it with this soldering iron! It melted just enough around what I was soldering without leaving a goopy mess. Going by my experiences, for basic regular sized jobs, perhaps even older automotive/motorcycle electrical, I bet this thing can pull it off. I know that's what I'll probably end up using it for in the future. If a more constant/even temp is required, or a more hardcore job, then I'd probably buy a bit more expensive iron with more features, but for a newbie like me this station is a good start.

I got this to start out soldering on my guitar. I didn't want to get a cheap iron, and didn't want to spent $100 bucks on something i really didn't need. So at $40 this guy was the choice, and the reviews were good for most Weller products, so i gave it a shot. Some things about this guy seems a little cheap though when it arrived, like the plastic construction seems a little cheap, but not flimsy so it's not too bad, as long as you don't rough it around too much. The iron holder ( the spiral metal thing) can be a little tedious, and i worry about it falling since it's just sorta resting in a groove in the plastic. But i haven't had an issue so it should be ok in the future. I was a little confused by the sponge that came with it since it's completely flat. "Really?" i thought. But it expands perfectly and sits nice and snug in the little sponge holder.As for soldering, everything went great. It takes a little bit to warm up (i'm really impatient so probably only about 5 minutes depending on the temperature). It comes with a small chisel tip which is great for beginning, since you can easily get a good amount of solder on the tip and not worry about missing what you're trying to solder. The little heat adjustment knob is a great feature to have as well. I used it on 4 (out of 5) and was able to get sufficient heat to heat up a potentiometer plenty. It's also great for when you let the iron sit for a bit, since you can turn it down to about 2, and then crank it back up to whatever you were using before and not have to wait as long for it to heat up.This is a great choice for a beginner's iron if you're willing to spend the extra money. It's well worth the investment!

I bought one of these 5 years ago. It feels pretty cheap, but for what it is, it works well. I switch between the original tip and a thinner one depending on what needs to be done. I've done some surface-mount type soldering with this and so far haven't had issues I can attribute to the iron itself. I have not had any (noticeable) damage due to the non-ESD safe, ungrounded tip.However, I wish I had saved the $40 or so I spent on it and put that towards a temperature-controlled unit. I would advise the same for anyone thinking of buying this for PCB work. For this kind of soldering this feels like an unnecessary intermediate between a cheap soldering pencil and a temperature-controlled station.These days there are good offerings from reputable companies (including Weller itself) that cost less than $100 and offer a grounded (ESD-safe) and temperature-controlled tip. While this WLC100 lets you lower the temperature with the dial, it only dials down the power delivered to the tip. It does not keep the tip at a constant temperature.

It does heat up quickly, solders well, and it has held up. However, it is rickety, a bunch of parts that barely snap together, the light to indicate it's on is not really visible and why it flickers, I have no idea, and the on/off switch is in the back, which is a serious safety hazard (you can forget to turn it off).

Very good soldering iron with one issue so far. The iron seems of good quality, however, the metal part seems to be coming apart from the plastic handle - it is wabbling. I am not sure if this happened because of the heat or maybe I got a deffective item.

Used this once a week for a little over a year before the iron fell apart.Everything else is good, but the iron is of poor quality. The iron gets nice and hot, the control allows you to dial in the proper heat setting for your job. The station has a convenient place to store extra spools of solder. I just can't give it any more than 3 stars because of the design of the iron. Its not built to last. It didn't last.

After all I had read about "Aoyue" soldering irons being a quality unit, I purchased this one for small repairs. My first impression was that it is not as well built as I thought. Upon arrival, in my excited anticipation as I unpacked it, the excitement turned to disappointment as I saw that the on/off switch was not in the unit, It was hanging out of the opening and the case was not staying together at the junction. After pushing the unit back together and convincing myself that it still may be an okay unit, I plugged it in. Another disappointment. It did not heat up as quickly as we are lead to believe, nor as hot as some of the claims. When I purchase my next soldering iron, sad to say, it will not be "Aoyue".

It's a good iron for the money but I could never get the tip to tin properly. Since I didn't do much soldering or any precision soldering that didn't matter much. As I became more involved in playing with electronics and building up boards I needed a better quality iron and purchased a Hakku. If you are just going to do general work every now and then this is a nice inexpensive alternative.

Solid product.Pros:Sturdy constructionTip heats up fast and temperature is well controlledInterchangable tips a big plusCons:Screws are too short to allow full assembly. Holding device cannot be attachedOverall, a solid product, just wish they spent 5cents more on longer screws

If you are cheap and need a soldering iron for occasional use, this will work fine. It is not a quality piece of equipment. If I could go back and do it again, I would drop the extra money to get a quality piece of equipment. If you are looking for a piece of machinery that will perform, bump up your budget $30 and look again.

Unfortunately I was surprised to find out that the knob isn't a temperature control but simply adjusts power. This means that it can get way too hot when you put it down and yet doesn't recover the temperature quickly when you need to make several joints in quick succession.

1. Mine arrived with a missing screw in the base (1 of the 2). Hecho in Mexico. Will add pix.2. Takes forever to heat up-minutes.. I must be used to my 30 year old Weller TC202/TC201 WTCPN heating up in about 15-30 seconds.3. Ships with a smaller chisel tip. Reordered a conical for small work.

Design good for analogue. I have ownd similar one 20 years ago and it was less known brand still as reliable as Weller (still works, but when you have two locations you do do need two of them instead of traveling with station for hobbies).The only problem I have is that it was used. Do your really think I cannot recognize that tip was used and it is smeared in solder and resin? No it does not have in this from factory. Someone was already soldering with it and it should not be restocked with used tip. I could also see that box was resealed with some popular scotch tape an box was slighly torn from opening. I do not mind having lightly used soldering station (as long as it works), but then do not sell it as new. It is not right to advertise used equipment as new. Since I needed sharp tips for electronics I oredered two of them and replaced original (used) one anyway. Not big deal here, but just sales people integrity issue.I measure temparature of tip with laser gauge and it is sufficeint to melt electronic solder, but we will see how reliable the station is soon.

I only solder things here and there, so I haven't used it a ton yet, but it's been alright for what I've used it for so far. The tip is worthless. I read all the instructions about caring for the tip, and I followed them, but I can't get anything hot with it. Solder beads off and doesn't stick. I plan to get a new tip, and when I do, I'll probably be very happy with it for my hobby purposes.

The units heating and tips have stood up well. I had issue with the set screw that hold tips in barrel. Went 180 degrees and drill and taped a 6-32 set screw in. The barresl original 4-40 or what ever size it was does not have enough material to take many tip changes before it stripped out.The side plug-in for iron always seems on wrong side of bench, but that just my issue Low end power adjustment seems low to proportion of pot adjust. Handles nice, & wide selection of tips.Up date: purchased 2/2012, heater element failed 1-17-2016, moderate hobby use.

Awesome soldering station except that it was missing the sponge to it.

Within 15 minutes of first-time use, the entire tip and metal section popped out of the iron handle. Just prior to failure, I observed the tip section appeared bent after cleaning the tip on the wet sponge. It appears that the tip section is supposed to be attached to the handle with simple rubber tips. I only saw one of these rubber tips. Needs more sturdy redesign.Very pleased with the quick and simple return process with Amazon Prime.

I was expecting a lot more from this, even for something under $40. The quality of the wand, wiring, stand, and the rest was appalling. Cheap plastic and seems very brittle. I was really excited to use it, which quickly went away, turning to disappointment at how poorly the unit worked. The LED to indicate power was too dim to see even in a low light environment. The iron took over 5 minutes to heat up enough to melt solder, even at full power. I tired to solder a few simply joints on a through hole board and it would take between 20-30 seconds to heat the foil enough to flow solder. Pay more and get a quality station, or pay less and get a quality standalone iron.

Not a big fan of this product. First - who would design a product (that heats up!!) with a hard to see power light? I have to cup my hand over the top of the unit to barely see the flashing power indicator. Second - cheap tip, very hard to keep tinned. I ordered higher quality tips in a hope to get a usable tip. Yes, I know you get what you pay for but I thought this unit would have been a better product based on the price and reviews.

The iron, PSU, and holder are cool but the rest is junk and a waste of space. The coil stand is extremely annoying to connect to the plastic tray and the whole station is unstable once assembled. I recommend mounting each component onto a 18" x 12" wood block for more working space, stability and personalization.Addendum:Iron came apart at the handle after about 10 uses. It doesn't appear to be able to handle its own heat

I have used this for a few months. I would not buy this again. It is difficult to adjust the heat and when it reaches the temperature it shuts off and the heat drops rapidly. This even happens when on the highest temp setting. Spend a little more and get a better unit.

It's a little bit low on power, and its super hard to find replacement tips for it. It's an ok starter iron I guess, but I ended up buying a little bit higher quality Weller instead, I think even for hobbiests you're better off spending 25-50% more and getting a real high quality iron.

I've been using Weller products for years, and they have finally convinced me that they do not make any "professional grade" soldering equipment. This so-called "station" lasted me about 6 months, used it maybe a dozen times, and now it won't melt solder on any setting. Save your money on this one, do your research, buy something decent even if it costs a few bucks more..

It works, but the quality control is awful. It's supposed to have two screws on the base of the unit, there is one...really? It was that hard to overlook one of two screws? I understand it's a budget soldering iron, but come on.It takes a few minutes to heat up enough to melt light duty rosin core 60/40 solder, but once it heats up it worked fine. The cord for the base unit is very short, less than 48"...the cord on the iron itself is plenty long, much longer than the base cord.All in all, I'm disappointed in the product. But it is true I guess, you get what you pay for...I just expected more from Weller. Oh, when I went to register it, I couldn't...the unit doesn't have a serial number.:/ So I'll expect no love from Weller WHEN it breaks. It's cheap and made in Mexico, I'd seriously look for a higher end unit if you can.

Not sure if 2 stars are fair. I used it only once for 10 minutes and it worked as advertised. But will now no longer heat up a week later. Seemed to be the handle and not the electronics since it is still cold when plugged in directly. Past 30 day return and I don't have the time to have it repaired at this price point (and pay for shipping) So I'm out the full $$ on this one.

Beware: this is NOT temperature controlled. It is basically a 40W soldering iron powered through a dimmer circuit.

I ended up returning this. Very poor design. The wire on the wand is just lampcord, made of simple rubber and is rigid, so it gets in the way and easily gets tangled with the work you're doing - and its inflexibility can "steer" the soldering iron, which matters with delicate work. The wire is also too long and not heat-resistant, and it plugs into side of base with a bulky 110V AC plug. Some may like that feature as they may think it makes the wand portable to use w/o the base, but as far as I'm concerned I bought the base / wand combo for its precise heat, why would I want to split that up and get full heat? Also to hold the soldering tip there's a set screw (as opposed to a threaded compression fitting) - so the screw sticks out from the iron at the base of the tip, and the iron is constantly getting hung up on the wireframe coiled holder via that screw when drawn out of the base, dragging the station an inch or two towards me. Frustrating. I owned a more "pro" Weller station previously (got lost in a move), and simple things from that design would be nice in this unit - shorter, heat-resistant wire & more flexible wire, and nix the set screw. Sure they value-engineer lower cost soldering stations for a reason, but some design issues can't be THAT costly to implement (the screw for example, or wire length). Oh my what a rant, it's just a soldering iron. Good luck!

Burned out after only one project (less than 50 standard solder joints). Handle gets too hot for comfort as well. I'm an experienced solderer, thought I'd get a bargain based on other reviews here when my old Radio Shack (i.e. from the 1970s) pen finally died and I could no longer get tips. Don't waste your money on the Aoyue, though it does have a very nice box with a carrying handle. I have found that the X-Tronic Model #3020-XTS Digital Display Soldering Iron Station - 10 Minute Sleep Function, Auto Cool Down, C/F Switch, Ergonomic Soldering Iron, Solder Holder, Brass Tip Cleaner with Cleaning Flux works beautifully, though it is a little more expensive. Perhaps I got a dudd, but the Aoyue is really cheaply made. If I had seen it in person before buying, I would have moved on.

So upset I finally opened up this product and it stopped working with in 5 min.

I had high hopes for it and I was using it just fine and then it decided to die on me on the 2nd day of use. It doesn't even heat up anymore. When I turn the knob it's stone cold. I might of gotten a defective one. Very disappointed.

The iron broke out of the handle after a few uses at heat mark 5. Sadly it happened after the 30 day exchange window. Say some time and money - skip this one (no matter who's name is on the box) and get something better.Not content to just be sort of broken, the thing just snapped in half while I was using it. Photo attached. Skip this worthless product.

Similiar to other users, worked great but the metal detaches from the plastic handle. The plastic doesnt seem to do well with the heat so when using it on a 6-7 setting it will constantly work its way out of the handle. Then requires you to stop and push it back in with pliers. I only use this to solder r/c wires so I dont use it any more than for a hobby.

The ceramic heater failed the second time I used it. A piece broke off of the heater itself and it no longer works. Wasted $30.

Wanted a "soldering" iron, instead I got a "suffering" iron. This thing works no better than an old $3.00 radio shack model. Also the tips are expensive.Hakko FX888D costs more, but it's the thing you want.

Worked for one day, then died. Quality leaves a lot to be desired. The plug on the side of the base unit pulls out almost completely when removing the soldering iron. This is not the same quality as the light-blue products from 30 years ago. Returning defective unit.

Since this was the #1 in category, I bought it. Oops, wish I hadn't. Soldered maybe 50 small wires and components with it in maybe 3 sessions and the unit is just maddening. Seems it either cooks the hell out of solder and wire insulation or it's not hot enough to melt anything. It's like someone switches a light switch on and off while trying to use it. I've played with the control and it doesn't really help much.The other disappointment - since day one, the tip has been dark gray and rough. Never been able to get it clean. I've tried a few different solders with it.

worked for about 5 hours now it's back to the old radio shack solder gun what a waste of money and I Thought Weller WAS a good product

It has taken me two hours to get two beads. It doesn't want to heat the solder.

Pile of junk. Used half a dozen times and now it either doesn't heat above 100 degrees on 3 or below and a smidge above 3 gets you the max temp causing solder to bead and run off the components you try to bring together. Frustration and waste of money. Well er is not on my list of accepted soldering irons.