Side by Side Comparison of: Zircon vs Qooltek vs Stanley vs VideoSecu

I bought this and a magnetic type that finds nails. This works fast and easy, no false positive issues.The magnetic one I bought is almost useless as some walls don't have nails. Buy this one and use magnetic type as a add on not the mail stud finder.

Works great, follow the instructions and use your brain and you won't have any issues. Follow standard building code for your area and measure out other surrounding studs or rafters to double check before making any holes in drywall. It's been 100% accurate for me this way on a few projects so far. I would recommend this product over the cheaper non-electronic types. Make sure you have a 9v battery on hand.

Worked absolutely great and found the studs with no issues at all! LED light will shine a red arrow to alert that you've found the edge of the stud.

Fun to play with and loved doing the whole stud finding joke on my husband.. it made him smile and scoff. Also it works really well and is easy to use.

Love the way this fits in the hand. Works great , very pleased !!

Great , I put up three shelves perfectly finding the stud

This review was edited. After leaving my first negative review, the comapny swiftly contacted me and sent me a replacement along with their new tripod stand. This tool has now meet everything I was looking for. What a great company to deal with!!I was extremely excited for this product to arrive. I believed this was truly going to save me time. Needless to say, my hopes were dashed. The measuring tape completely broke off on the first use. The 3 separate laser settings are nice but it is hard to get the laser in the cross position. Needless to say, I went back to the old fashion way of leveling to finish my project. Another key feature I feel is missing is the ability to simply attach the laser to the wall.

Eminently useful. A little difficult to get the cross shaped laser perfectly leveled but once you do it's very useful. Wish the batteries lasted longer though.

I have only had this tool about 3 days and I have used it for leveling shelves in my shop to putting up cup hooks for keys inside a cabinet. Not only is this a great versatile tool but the mfg. has installed batteries as well as included another set. Of all things there is also a handy small screwdriver with the tool for opening the battery compartment. A full set of levels and a tape measure in metric as well as inch measurements. The more I use this tool, the more good things I find about it. I haven't looked but I would be surprised if this tool is made out of the USA. It is excellent and well worth the money. I am happy to recommend it.

*Update-I gave this 2 stars for my previous review but have since changed it to 5 stars. Not necessarily because of the quality of the product but because of the company. They were very pleasant to work with and stayed in touch throughout the time it took me to figure this out. They even sent a new level which was level this time around. So thank you Qooltek for you assistance.1st Review-This was ok. I love the features but when I got this in, the laser wasn't level so it's been a pain to get it level with longer wall runs. I'm constantly having to adjust the light and using sight to check if the line is actually level. Wish I could've had one come in already set to go. Would've made my shelf installation go a lot smoother.

Okay so I just bought this laser level and i am most impressed!! First of all, it came with a little thank you card from the start up company Qooltek that is working with amazon looking for support. They have mine! when i opened the package, a small screwdriver fell out for the battery compartment, thinking that it was nice of them to include this in the box, come to find out that the laser level already had batteries in it and they gave me an extra set!!!! I couldn't believe it when i opened the battery box to find that there was already batteries in the product and they gave me extras!?!?!! No one does that. Kudos Qooltek. Laser level worked like a charm too! No problems

Level works well and the laser is nicely bright. It was a very nice tool to have when hanging curtains during our latest home remodeling. As a bonus, it comes not only with a set of batteries installed, but also a spare set. My only complaint is that the measuring tape is not flush with the bottom of the level, being up about 1/4 inch from it. Excellent for the price.

I'm a noob diy'er and I loved how easy it was to cut up the dry wall with this. I was expecting it to be much harder. The lines were clean. It's a solid product.

Love the cushioned grip. Sharp teeth stay that way after 2 months of use so far. 4 more xx words.

works well

Great product. Very thick and strong materials. Still hard work cutting the drywall though. Definitely need some muscles!

The Stanley 20-556 FatMax Jab Saw is an inexpensive, well made Jab Saw for probably anyone with a use for such a tool. I was going to say that perhaps a professional should choose a better tool, but because nobody I know sharpens these things and you cut through all kinds of drywall and crap I look at it as mostly disposable once you wear it out.That said, I don't plan on needing another one in the next 10-15 years due to how often I use a tool like this and it's totally sufficiently durable construction.

Jab saws are often used to cut drywall but I found a better use! When planting on your knees, and come across a thumb-thick root and don't want to bother standing and getting a big heavy shovel, this saw blade knife, hacks through roots quickly. Be sure to always put this knife away or put in soil with handle up. The wet conditions will make this knife rust quick so take it inside, or rinse and dry.The price was better than in the big box hardware stores. The large rubber handle is perfect for garden conditions where moisture on a wood handle will cause slipping.

This wall mount is high quality and very versatile. The basic arms of the mount fit perfectly to our 42" TV, so I would have to assume if you had a larger television the extending arms would just as well. The directions included were easy to follow and all hardware was nicely labeled and included.*Please remember that knowing where your wall studs are or using drywall anchors ensure that the mount is secure.*The mount does offer extension from the wall and the TV moves very easily. My only complaint would be that to angle the TV you must hand adjust and then lock into place making angling the television not always an easy task, but this does ensure more security for your telvision.We also appreciated the level and the HDMI cord that was included with the price. Overall an amazing deal for a quality product that cost upwards of $100 or more in stores.Would definitely buy again and recommend to family and friends.

I used to install TVs for people professionally, so I have used many different mounting systems. I was looking for something cheap, but reliable to hang a 50" LG 50LA6200 LCD TV. I looked at a lot of options both on Amazon as well as elsewhere before settling in this one. I am happy that I did!For starters, this comes with EVERYTHING that you could possible need to hang your TV, with the exception of a #2 phillips head screwdriver and a drill. Included are a complete assortment of screws, bolts and washers (all neatly organized and labeled in individual packets), a double-sided spanner wrench, a very nice magnetic level, and even a 10' HDMI cable. The instructions say to use the "optional" expansion kit for larger TVs. Usually, this is code for "kit not included." I was pleasantly surprised to find that that was not the case here. For once, the "optional" kit was actually included!Installation was a breeze for me, even without instructions since I already know how this works, but I found the instructions relatively easy to follow for those who need them. All of the various configurations for the expansion arms can get confusing, but just try each one until you find the right setup for your TV.** PLEASE NOTE **There is one change to the instructions that I highly suggest, however. The instructions say to drill a 7/32" pilot hole into the stud for each mounting bolt. Then screw the bolt in with a phillips head screwdriver. When I first mounted this (I wound up moving it shortly thereafter), I followed the suggestions for the pilot hole. Sure enough the screw did thread in easily... a little TOO easily. The second hole from the top actually stripped out and I was not putting much force behind the screwdriver at all! When I moved this to the other side of the room, I decided to go with a smaller pilot bit. I used a 3/16" bit instead. Granted, you are not going to thread the bolt in with a screwdriver - you will need a 10mm socket - but doing it this way, those bolts are not going anywhere! You could probably get away with a 13/64" bit, but to really protect your expensive TV, I would want all of the bite I could get!I also found that the inside diameter of one of the washers was a smidge too small for the bolt to go through. I just enlarged it with a round needle file, but since they don't include any spares, if you don't have a file or another washer laying around, you'll need to get one. Just thought I'd throw that out there in the interest of full disclosure.Once this was installed, I was impressed with not only the sturdiness, but also with the complete range of motion. This is fully articulated. You can put your TV pretty much anywhere you want to. The only thing it can't do is move your TV up or down, although you can tilt it to a certain degree.

So I was very skeptical of this product when I first looked at it, lots of people saying it would tear out of the wall shortly after installation and all that. Lemme tell you, they just did it wrong or like complete idiots; you do no use dry-wall mounts for a heavy TV, possibly a lighter TV, and I can not stress the word "Light" enough. No one should be using dry-wall mounts in the first place, they are not reliable... plain and simple.Anyways, back to my experience with the product. I have it mounted above my Xbox One about 4 feet off the ground. I mounted to a stud in the wall and right after that, my roommate who weighs around 150 LBS hung off of it for about 5 seconds at the base and it didn't even budge; now that's a tough wall mount if I ever saw one! I put my 40" Samsung TV on the mount, and I can extend/swivel/angle/tilt it however I want.The gear it comes with is pretty high quality and especially the level. For an add on to the product the level is pretty decent for it's designed purpose. The packaging is well done and the parts are all labeled well and accordingly. Make sure you use washers on the outside of the mount before you put the TV adapter on your TV, they will save you a lot of grief.I've had this wall mount for a month so I felt pretty confident in writing a review. I'll add some pictures to let you know the range of motion as well as how the TV looks how I attached the adapter and the part where it's mounted to the wall. I can sit specifically off to the side and enjoy the TV along, I can turn it to look at my PC area so I can play while I talk to friends on Skype or other chat programs and I can turn it to look at my bed and I can enjoy Neflix or Hulu as I lay in bed, nice and cozy.I hope you all enjoyed my review, it's been a blast and I'll be willing to answer any questions you might have.

Based upon some of the reviews, I mounted support brackets between two studs and using a heavy duty toggle bolts, mounted the wall mount. It went up in about 90 minutes and is solid! Used heavy duty screws to assure it will not fall from the wall.Kit includes level and cable as stated and is great! Articulates out and nice adjustment of the angle. TV looks great!

8/28/2017 UPDATE: The review and the pictures below are accurate for the TV mount I purchased on 01/26/2015. From the comments I am getting for the past 6 months, it seems that the seller might have changed the product since, and my review and pictures might not match the current product. That is not under my control, seller should have created a new listing for the new product but chose instead to use the same listing because of the 19000+ reviews posted. So please don't blame it on me, I'm just a customer that wrote a review to the product I received back in 2015.Original review written on 03/02/2015:Bought it to mount 3 LED TVs (2x65", 1x50") in an office, chose this model mostly because of the lockable feature. I didn't use the included lag bolts because of the poor quality complaints in previous reviews. I didn't want to take the chance to strip the included bolts so I bought 5/16-9 2-1/2 lag bolts from Lowes (item 63396) and a box of 1/4" Toggler bolts (Lowes item 118084). On one of the 65" TVs and the 50" TV, the 2x4 studs were spaced perfectly and I was able to mount them using 4 lag bolts each. On the other 65" TV, the stud was about 2" off center so I put 2 lag bolts in the stud and 4 toggler bolts in the left and right most holes. I put my entire weight (200 lbs) on each mount half way extended and they held up just fine. Here are the pros and cons:Pros:1. Good quality mount2. Ability to adjust the horizontal leveling (plus/minus 6 deg)3. Lockable mount with 5 mm holes. Most pad locks you can find in stores have 6 mm shackle diameter, but I found the Master Lock 131Q has 5 mm locks and it fit just right.4. 10 ft HDMI cable included5. Long arms give you the option of moving the TV in almost any position.Cons:1. There is nothing to stop the TV from sliding from one way to the other on the two horizontal bars. That would screw up the horizontal alignment every time the TV is moved. Not sure how they didn't think about this. I used some black duct tape to prevent that. I could have drilled holes in the horizontal bars and put some screws in but duck tape was faster.2. I wish I could have been able to use zip ties to route the cable on the wall side from the lower side to the upper side or the mount, but there are no holes to get the zip ties in.Very happy with the purchase overall, would buy again in a heartbeat.You can see how it looks with a 65" TV attached in the pictures below.[...].

I mounted a 60" Sharp LED TV to this mount with no problems. I recieved it sooner than expected & it was 98% assembled out of the box. I followed the directions, took the time to do it right & it took about 20 minutes.I always read the negative reviews first & I am baffled as to how people can have problems with this product. This mount is well made & I would recommend it to anyone that is concerned over the reviews stating it sags.The mount can be easily installed by one person as I did below: You may need help to hang your tv on it once it is installed. I am laying this out because of the problems I read about in the other reviews.1. Figure out where your studs are & drive a pin or finish nail on each side of it to be certain where the centers are. Make these small holes about 1/4" above where your mount holes will be drilled. These small holes will be covered by your mount.2. Drill your first pilot hole into the center of the stud & run the first lag bolt & washer through the mount & get it near snug.3. Extend the bracket so you can lean against it.4. While leaning against the mount in a eyed up level position, lay your level on top of the wall bracket & get it level.5. Pull your pencil from behind your ear & mark the second hole which is on the opposite side of your first hole.6. Let it back down & drill the second hole in the center of the stud.7. Move the mount back to the level position & install the lag bolt & washer.8. Tighten the two lag bolts so they are just about crushing the mount into the wall.8. You can now drill your bottom holes & install the lag bolts & washers. Make sure you are in the center of the studs.10. Tighten & retighten all four lag bolts. If these are not tight, you will have problems with the TV sagging when the mount is extended. It is critical that the four lag bolt are tight against the mount. If you skip using the washers, you reduce the strength & stiffness of your mount.Any fine tuning needed can be done on the 3 bolt swivel plate after the TV is on the mount.The mounting bracket has holes so you can install mud rings & plates for your wiring. I will be installing a recessed power outlet on one side & a brush cover faceplate on the other for the signal cables on the other. The mounting bracket has wire chases so everything is neat & held to avoid crushing cables.The only thing I will do to modify the mount is to drill a small hole in the upper portion of each pivot point to allow me to easily give each pivot a shot of WD-40 once in awhile. This should keep it operating smoothly & keep things from getting tweaked if it gets a little sticky from dust & oxidation.

i am happy with it. wish it would have come with a battery though

I have to rub it along the wall and turn it off and on to get it calibrated, but it only takes a few seconds. Definitely an accurate enough stud finder for the money!

Works fine, instruction said it would make a sound like a buzz, never heard a thing. I also found that if I went from left to right it gave different readings than from right to left. Not sure why, but it did zero in on the studs.

Serves its purpose, if you learn how to use it. Red projected arrow (its appearance and disappearance) DO NOT identify the stud location, at least in my case.Here is how it worked for me (confirmed through repetitive hole drilling so I know exactly when were my stud edges):As you move the device steadily over the wall, as soon as the sound and projected red arrow appear, this means that the stud leading edge lies approximately underneath the area between the "C" letter of the ZIRCON name, and black triangle above it. Maybe around this triangle vertex. See attached photo.The device seems unable to identify the trailing edge (where does the stud end). You should rotate it and scan backwards to identify the second edge, which will be the leading edge this time.

This isn't quite as fancy as some of the ones I was looking at that show you the entire width of the stud at once, but then again, those were $30 or $40 more. My last stud finder first declared the whole wall to be a stud, then said there were no studs (same spot), so I was really needing a replacement. I've just used it to hang some speaker mounts and it did a great job locating the studs. I appreciate that it also has the deep sensor option and that it alerts to electrical works.

Once you get the hang of it, it works real good. Seems you have to make a couple of passes and make sure you start in a place that doesn't have a stud, then when you find one you can tell you got it. If by chance you start right on a stud, the thing seems to get confused. Either way a couple passes to make sure you got the right read makes sense and gives better results. Never tried a different device so can't compare, but this one did the job nicely and I will have a good amount of holes in the wall to fill when I move out.

Make sure that the laser is calibrated before one uses it. Just follow the instructions in the booklet. Read Carefully! The line change occurs when one moves the lens UP or DOWN. Rotate the lens barrel to set the lines. After that procedure, it works perfect and a good value for the price. JMC

Update:After giving it some use for a couple weeks its actualy really handy. Makes me want to get a professional and more accurate version of this, but for the price this one is very good. Changing to 4 stars.This is obviously not meant for professional use since its all made of plastic (even the datum bottom surface) bit for house work this is plenty accurate and handy

Update 10/10/2017:4 months later with very light use, the item broke but the the manufacturer was amazing and responded with courtesy and options. They were really helpful and honest. If you want a cheap level laser with good customer service, I would suggest purchasing from this company.I'm using this device to write in straight lines and not at all for utility purposes. This does not have magnets which allow you to hang it on walls for hanging decorations etc. So far, it has worked exactly as I had hoped it would. The 3 laser modes are extremely nice and easy to use. I just hoped the switch would be different in a way which isn't so easy to accidentally switch in your tool bags or storage space etc.

I like this but wish it were a tad more intuitive. Maybe it will become so overtime. That said, for the price it is a pretty versatile product and I appreciate that it comes loaded with batteries and an extra set, as these are not batteries one is likely to have on hand.Cheers!

Nice little laser level. horizontal, vertical, and a cross lines. 3 settings.

Nice features. Level is handy as a torpedo level, but serves for making the laser level too. Great that it has three beam orientations, horizontal, vertical, and crosshairs. Easily switchable. Only drawback is that its not powerful enough to use outside hardly at all. Beam has good distance indoors. I have several other more expensive lasers for other specific uses, but this is good for quick beams.

Very sharp wish it came with a cover.

This cut was able to cut through dry will like it was bread. Made my job mounting a TV on the wall extremely easy. Only problem is it got slightly damp and rusted overnight. Doesn't effect performance just annoying.

The drywall knife works great but had to buy an extra sheet for hints four stars.

The blade is very rigid making it easy to "jab" though wall board. I recommend using a forceful push as opposed to a jab for safety. The saw teeth are designed to handle wall board very easily and it can be turned in any direction without much effort.Someone just asked if the "cut will be smooth?" Yes, it is made for dry wall. I used it not long ago and it is very easy to control. Bottom line, the hole you cut will be hidden with an appropriate plate to match your connections and the edge of the cut out will be behind the plate.

I bought this to cut thru the false back on a shelf that was made of plywood. It cut thru in no time and left a pretty smooth edge as well. I did drill out a starter hole for it before cutting. Handle was rather comfortable for a hand saw as well.

I was creating a couple of openings for new electrical sockets in my home; I had started them by drilling smaller holes around the area I needed to saw out, and though I was using a fairly sharp drill bit, it was quite a task to drill all the way through the 2-layer, 1" thick drywall I was up against. Enter Fat Max... and I mean that literally. That little sucker tore through that drywall like it was French bread, and I was done with both openings in less than five minutes, with much less effort than I expected it to be. This is my first experience using a saw like this, and its ease of use is already giving me more ideas for home improvement. My landlord will just have to deal with it.....

Seems to be a very strong wall mount, which is excellent and what you would buy this for. However, I found it extremely complicated to get the TV into a position I liked, as moving it around was not very cohesive. I finally have the TV (a 55" flat screen) where I want it and the anchors/wall mounts seem to be doing exactly what they need to. The thing could almost hold my full weight (170lbs) after being secured to a stud, which I guess, at the end of the day, is what you're buying this for.Also, getting the bracket to fit the back of my TV was a real son of a gun. I had to really jury-rig the additional pieces to get it. I feel PRETTY confident with what I was able to do, but rigging things together is always my last resort and leaves me feeling not 100% certain with the product's integrity. Will update if anything changes.

I'm tempted to give this 5 stars, because it really is amazing for the price. I have a wall mount that cost me about 4X the cost that doesn't have the adjustability of this one. This also came with a lot of different hardware, a HDMI cable, and a level! I've already used the level to mount a new soundbar to the wall, and I used some of the different hardware (bolts) to mount another TV on a bracket that I hadn't kept the other sizes for.I'm only knocking off one star because there's some slop that allows the TV to rotate about 10 degrees clockwise or counter-clockwise, so I periodically have to level it out. But to get that kind of precision machining would probably at least double the price, and it's not like the thing is flimsy - the vertical bracket alone is really heavy duty.

I have two of these now, and they perform as expected, which is key here. If you are just looking at something affordable that will allow you to mount a monitor on the wall with only OCCASIONAL movement needed (such as connecting or disconnecting HDMI/Audio cables when necessary, then this is a good buy.The cons: the rotation on the monitor face (going from 0 on X axis to anything more) feels to be about 10,degrees of rotation, so i believe its really only there to provide adjustment for sloppy mounting to the wall, or something. The arms that extend from the mountpoint on the wall, to the monitor, are VERY tight.Take care when man-handling your monitor when you need to extend the monitor from the wall, you might break the monitor from the mount points in the back of it. it hasnt happened to me, but it might. Lastly, the bolts that come with this are very easily stripped when attempting to drill this into the wall BE CAREFUL. That is, unless you never want to remove it from the wall. in that case, be my guest.Moral of the story is, that i'm relatively satisfied, but i dont think ill ever have to rebuy this, since i have 2 now. Whenever i decide an upgrade is needed, it will be to accommodate movement on the Y axis, for increased viewing flexibility, some thing like this i found on a very quick on basic search: https://www.amazon.com/North-Bayou-Motion-Computer-Monitors/dp/B01AI2YGK4/ref=zg_bs_10967501_6?_encoding=UTF8&psc=1&refRID=P3T4VCDYW7SYCTV0FPM1

Seems solid enough for my older model Vizio, which is pretty heavy. The installation is easy, attaching to the wall us simple enough, they even give you a little level (which is a pretty handy size for other stuff). It is required that the unit be mounted to a stud, which I would do anyway on something this heavy. Attaching the arms to the back of the set is an exercise in trial and error but I got it after a couple of tries. Hoisting the set onto the wall unit is fairly easy using the guide tab on the mounting bracket. I did it alone, but would be better as a two man job, There is lots of left over nuts and screws which would be used in other installations.

We have a 40 inch Roku TV and this was bought to go with it. The instructions are easy to follow and it wasn't difficult to mount on the wall after finding the stud, except for the fact that the screws that came with it break easily and we had to find replacements. Once it was up on the wall, it was easy from there. There is a lip that the television sits on that is easy to click into place and then two screws that hod it in. It has a tilt function and the arm is nice and long so it can me moved around wherever you need it to be. It kinda reminds me of the ones you see at hospitals, where you can swing it out over a bed or other piece of furniture.Overall, this was an easy installation and a good choice.

Arrived on time and undamaged.Does the job, nice motion range. If it had included a little stud finder instead of a level and little sturdier mounting screws it would've warranted a 5 star. But, I am completely satisfied with it. Took me less than 45 min to install (would've been faster with the level/stud finder switch) Just wish they had used hardened screws for the actual mounting screws. Once they were close to being seated in the wall they began to strip out. If I ever need to move the thing, I will have to replace those cheap self-tapping screws. Other than those couple small things it is a pretty solid mount.

Like most cheap stud finders it works 80% of the time. Does really well with finding power lines.

Read the directions three times over and had trouble getting it to work right... And I'm not a stranger to tools.

This works for normal drywall over studs. I have 1/2" foil faced rigid foam over most of studs and even without going through drywall it does not penetrate the foam and says there is always a stud. Unfortunate, but I had a suspicion it wouldn't work.

Works as any other stud finder. I didn't see this tool as any better or worse than other low cost stud finders I've used in the past. You need to ensure that the finder starts out in an area where there are no studs and slowly move until a stud is detected. Worked efficiently in that respect. Unit seams built of decent plastic, but wouldn't throw it around in your tool box. Worked well for me but as with most stud finders need to be a little patient. Relative to the cost, I thought it was a good purchase.

I finally settled on the e50 after searching around online. It seemed like people had good and bad things to say about most of the stud finders out there, regardless of the brand. Because the party walls in my townhouse are double drywall (1/2" + 5/8" sheets) I needed a stud finder with deep scan feature. On the interior, non party, walls this performed flawlessly. However, I got mixed results, at best, on the thicker party walls. It was finding studs left right and center some of the time and then other times it wasn't finding anything, even where there should have been(like beside an electrical box). Since this is rated to scan up to 1.5" deep it should have been no problem to find studs behind my 1 1/8" thick walls, but that wasn't the case. I wound up just guessing on the placement of most of the anchors I was installing.I'm not saying it won't work for you, but the deepscan mode was a disappointment for me. At least I have a functioning stud finder for regular walls I guess.

This is a traditional stud finder. It works fine, but tt can give false readings. I used it in conjunction with the CH Hanson 03040 Magnetic Stud Finder to double check each other and it worked fine, just not as well as the Hanson one. I really have no problems with this one except for the possibility of false readings, which you don't get with the Hanson Magnetic one. Overalll, it was a worthwhile purchase and I don't regret buying it, but I do prefer the Hanson one for reliability and guessing games of whether it is a stud or not.

Works well; but it needs some kind of switch cover or the switch needs to be more of a positive throw. It's often dead when I pull it from my tool bag because it was leaning against something else and got turned on.

Level works great. The measurements on the bottom are handy. the tape measure is flimsy, so unless you are on a flat surface then you really need a second person to hold it. I have no freaking clue what good the laser is, it just shoots two uneven lines that form an X on an adjacent wall. I guess I was under the impression that the laser would shoot a level straight line. Even though the picture depicts a straight line, I can not get it to make a straight line no matter how I adjust it. Cool idea, could use some improvement.

Bought this for my dad for Dads day, thought it was pretty cool, its okay for some things, but not as versatile as I thought.

Tape measure is only 10'

It does what I needed, but feels a bit cheap.

I was not completely happy with this device; I purchased it for an outdoor project, but the laser is just not bright enough to use out of doors unless one is willing to work at night. That said, it is NOT useless. It is worth the price I paid, and I am sure I find uses for it in the future, just not the one for which it was purchased.

Feels cheap, sharp though. I will put my money into a nicer saw when I wear out this guy.

helped out a lot, but blade bent after a few uses.

messy way to cut dry wall

Very sharp, but the big teeth require a long stroke. Didn't work for what I needed it for but will hang onto it anyway.

Works fairly well, however it was already beginning to rust when it arrived

I've abused this thing badly. I've asked it to do things that it wasn't meant to do. And it's done well. Its okay. But Stanley, like DeWalt, has been going south for a while now... I've smashed out a lot of stuff with this thing for about a year? I'm about to replace it. Its okay, but it ain't great.

The mounting screws that come with this strip like they're made of soft plastic. There is a RIDICULOUS number of reviews here, even 4 and 5 stars, talking about how crappy the screws are, that my girlfriend did not notice when she bought this. Glad I checked and saw the countless other people having issues stripping the screws VideoSecu cheaped out on, cuz for a second I thought I lost my manly touch with power tools. -_-But seriously, if you plan on mounting a possibly very expensive TV with this, I HIGHLY recommend you buy better screws on your own, because the ones VideoSecu provides are not worthy of the rest of the mount, which is very well built and sturdy. I honestly couldn't care less how well it's built though, because it doesn't matter if the practically most important part of the device are junky.My fix:Instead of buying better screws that VideoSecu should have provided based on the numerous issues they are causing for tons of people, just switch over to a socket wrench or use a bit socket that wraps the whole screw head. Come to think of it, it's almost like these were meant to be socketed in, and like the phillips screw head was added to a hex head screw or something crazy like that. Anyways socket wrench em in. I recommend against changing your pilot hole size as some others have suggested. That is usually a bad idea (unless you're going very slightly smaller to make it a tighter grip). Good luck.

I've had my fair share of TV wall mounts but this is my first where the support bracket is only on one side. My initial thought was, great two less screws to drill on my wall. Unfortunately, after installing this and mounting my 55" LG LED TV the top screw gave and away goes the TV on my head. Fortunately the bottom screw was still holding on fairly well.After that scare I used a thicker screw for the top part of the mount, used the supplied screws for second reinforcement on the top and at last the bottom.Now....the waiting game starts, it's been up for 30 minutes so I guess so far so good.I would give this 4 stars but the mount seems a bit flimsy. But, I guess for the price you cant be too picky, or nitpicky like they call me at work.

Works great after a month, although I can't give it 5 stars because I had to mount it to a board due to the fact that the distance between studs didn't match up with the mount, also, I wanted to mount the tv low, but was unable to because the holes on the mount wouldn't line up. HOW DOES THAT HAPPEN? so I had to mount the tv higher than i wanted. Instructions were easy to follow and mounting was simple.

The product is what it says it is. A small TV or Monitor mount. nothing special. I do have some concerns with the fact it only mounts at one point to one stud, but they do make bigger mounts and that may be what you need if this doesn't work for you. I also liked it came with the HDMI cord and a level. The product worked for me on three different TV's in three rooms and one room even being above the fireplace in brick. There is more than enough screws and hardware included with the exception of washers. for some reason each package only contained enough washer for three of the four TV screws on the back. other than that, works good.

I couldn't find the plate mounts I've used several of over the years, so I tried this one for a Hitachi 43" TV (43R5). The instructions are vague and you'd think it would be easy to figure out on your own. After a lot of trial and error I finally got it to fit, somewhat. The main problem was on the Hitachi, the bottom mounting holes are low on the TV causing the brackets to slightly extend down below the TV. If the TV was mounted low, it wouldn't be a problem, but mounted high on the wall like mine, the brackets show. It may not be a problem on other TV's, but I wouldn't recommend this for a Hitachi 43R5 if mounted high.

It works. Holds my 50" Plasma (55 lbs) just fine. I attached it to a beam, not a stud.PROS:Comes with plenty of hardware and an HDMI cable.Price (I paid ~$25.)After finding the stud, mounting the TV is pretty simple.CONS:You're hosed if a stud isn't in the spot you need it to be.The mounting bracket isn't in the center of the TV, so you have to offset the mount by about 3 inches. Not indicated in the directions.I would not buy this model again because of the limited mounting options. I'd buy one with upper and lower mounting rails that span 2 studs for more easy centering.

I did not find this either particularly accurate or intuitive to use. I regret buying this one and wish I'd spent a little more on a quality stud finder.

This is a terrible stud finder. I gave it a 2nd star because it actually found a stud once, but over all it was incredibly inconsistent and inaccurate. The the center point is about 3/8th inch off in both directions of center, which is completely unreliable.

Really nice when it works but very unreliable. Very irregular responsiveness and not consistent. I have normal drywall throughout my house and this thing had a lot of trouble finding studs. Occassionally it would read the entire wall as a stud or read like the wall has nothing behind it.

This thing is not as good as the old ones were. It is not consistent and could be much better. I would pay $50 for a stud finder that always works and is reliable. I got frustrated one day and this item ended up smashed on the car port. Now I use my old method, knock around for a stud and then measure 16" in the direction you want to go.

Does not differentiate metal vs wood. I had to buy another stud finder because this did not recognize that there was metal and not a wood stud behind my wall. I didn't realize it until I was halfway through drilling a hole into my wall.

The wire detector goes off inconsistently for me. When I run it over the same spot on the wall, it will sometimes tell me there is a wire there and other times will not give me any alert.Additionally, the stud finder is a bit inconsistent as well. It tells you the information you need but I found that when I ran over the same stud multiple times, it would give slightly different (.125 - .25 inch) answers to where the edge of the stud is.I have used other stud finders with similar features and found those to be less inconsistent.

When you hear the term laser, you might imagine a beam (projecting a round dot or point) with consistent intensity across a given distance. The reality with this tool is that it has 3 modes: A flat horizontal beam, a flat vertical beam, or both at once (+). Twice the distance gives twice the width (and/or height) of the beam, so it disperses quickly. I had to use this at night to be able to see the projection across only a 9 foot distance outside. It was impossible to see at this distance during the day.

The goodLight in the form of crossThe badLazer too weak for much distance in the outdoor sunThe on off switch toggle can turn on when being transported in tool chestBottom line great for indoor find something brighter for outdoor

intensity faded after a few weeks, even though i kept changing the batteries.. it worked fine for a while, after a while.. you won't be able to see the light. just meh.. wouldn't recommend if you plan on using it for a long time (i need it to "draw" lines on envelopes - calligraphy stuff)

I had accuracy problems with the level of the laser. I bought this to do a list of projects around the house. I got about 2 projects in when I realized the laser was not projecting correctly (ever so slightly off). At first, I thought I had simply made a mistake when my level(s) were off, but after a few issues I come to find the laser is not accurate.

The laser lever does not offer as magnet in the base (it really needs one). The laser is hard to adjust. you can turn the laser but there are no marks to tell you when its at 90-180. So you never really know if its at the right angle.

This looks like a clever 3-in1 device, but unfortunately, it's cheaply built. The tape measure is flimsy, and the bubble levels work about as well as any dollar store plastic level.Most importantly however, the laser level is mostly useless because the orientation of the beam can be changed, (resulting in the beam not going straight up or across). Not really sure why that feature exists when the point is the device is to draw straight, level lines. It comes with a "calibration tool", but there's no way to lock it at plumb level.So if "pretty close" is all you need, then the laser may work for you. Otherwise invest in something higher quality.

I expected better from the other reviews. I haven't used it much, just was using it and it was surprisingly dull. I don't think any of my guys were particularly mean to it from the looks of things.I wouldn't buy it again for professional use, fine for a homeowner.

Rusted after second use

Great little tool, but somehow I managed to bend/kink it in the first few uses. Could use a slightly sturdier blade. But still gets the job done.

cheap

Should come with some kind of cover for th blade - how to store it safely? its very sharp

Looked good when first received. Nasty looking double set of teeth. Tried on cardboard box. It didn't cut well! I was shocked. My comparison was a serrated knife (a small Spyderco folder) that has less leverage but went through like butter. This one struggled a bit and we sent back.

Initially this mounting bracket seemed good. It felt sturdy, came with plenty of hardware, and it was relatively easy to attach our TV (which weighs just under 39 lbs, so well within the weight limit for the bracket). The directions that came with it are somewhat overwhelming. There are 3 individual pages, front & back, of directions. If they were attached in booklet form they'd be much easier to keep track of. We carefully measured the space where we wanted to mount our TV, found the center of the wall, and mounted the bracket. When we attached the TV to the bracket and folded it back towards the wall, the TV is off center by about 3". Also, even with everything tightened down, the TV is disturbingly wobbley on the backet. It's not the tilt that's wobbley, so not the "up/down" direction, it wobbles to the left/right at the part that connects to the TV. Our TV was sagging to the left pretty badly. We were able to level it out and it does hold level pretty well as long as you don't touch it.The wobbling killed my confidence in the bracket. I wanted to take the TV down within minutes of mounting it. We'll be replacing this bracket very soon.

This mount takes 3 people to install your tvI have purchased a lot of mounts and hung tvs by my self but this one sucksI purchased because it had a good rating and thought I would give it a tryWent ahead and hung tv but will probably change out for a better mountDo your self a favor and buy a better mount

This did not work for my LG 42" flat panel. The braces could only be attached at the top because the lower ones covered both the AC plug in and all the inputs. The flange that attaches the mount to the wall needs to be much longer, IMO. I just don't believe it will hold to the wall reliably. Finally, when folded flat against the wall, the TV is about 3" left-of-center and the mounting design didn't allow any adjustment in that direction. I returned it for a standard wall mount with two rails.

While this is a solid mount, there is no way to adjust the center of the TV once it's mounted. I attached the mount so it was centered over my fireplace, where I intentionally placed a stud while framing the wall. After mounting the TV, I pushed it back against the wall and it was 3 inches off center due to the configuration of the mount arms. It looks pretty bad with the TV being that far off. This seems like a pretty basic adjustment that all mounts should have, and it makes no mention in the description that it is lacking this feature. I'm returning this and getting a different mount that has the required adjustability.

I got this mount because of the Prime Day price and the reviews. I removed my existing mount, which was perfectly level, and replaced it with this. When I installed it the base was perfectly level, but the end where you hang the TV was not at all. I had to loosen the bolts and adjust the mount every way I could to get the left side all the way up in hopes that the TV would end up level. It took a while and some frustration, but I got it as level as it can be. Now I'm hesitant to move the TV at all for fear of it shifting somehow and the left side dropping again.

Yes the mount is cheap and yes it holds up my TV and yes it was easy to put up, but that's where the compliments stop. The mount I received can never be level. When it's pushed in it leans one way and when I pull it out it leans the other way. There's no way to adjust that side-to-side tilt of your TV as the joint only adjusts up and down. I had to laugh with the level included b/c all it does is highlight how uneven the mount is. \Looking at the picture others have posted I see a nice cover for where the bolts go, more than two places to put the bolts in and silver metal on arm. The one I received is like the new stock photo. Completely square plate, no silver metal showing and only two places to attach bolts. While the metal is very heavy/sturdy, it feels like a cheap production and lacks attention to detail. I've given up on keeping the TV level and am just living with it for now. The arm is very stiff and difficult to pull in and out even with a 32" TV on it.I should have spent $10-20 more to get a quality mount, but this just seems to be one of those cases where the manufacturing got switched to some cheaper factory and the quality has gone down as a result. Keep shopping people.

I exchanged the I 520 for this item which is no better inaccurate readings on either setting I don't recommend this product

I changed the batteries. It is still not working. Bought it on 5/10/2017. Till Yesterday I dodn't have a chance to use it. First Inserted the battery and was holding the Power button didn't do anything. Then bought another 9V battery and replaced still the same. Can't ecven calibrate. Now I don't see the option of Returning and Replace

this thing does the opposite of what it's supposed to - let's you know where studs aren't. don't buy.

Does not accurately find studs! I had to drill multiple holes for "sensed" stud. Will be returning item!

Biggest piece of crap ever. No consistency at all. One time it will say there's a stud, 2 seconds later, it will say there isn't one. Most of the time it beeps repeatedly and doesn't even work. Don't buy! Waste of money. I had better luck with a free app on my phone.

Didn't find it very helpful... for whatever reason, it almost always report electrical activity behind the walls. So as a test, I had it scan just a bedroom door and it also reported electrical wiring behind it. As much as I would have liked an electric door that opened and closed automatically, it was just a plain old wood door, no wiring...

Laser is dangerous...read the sign before using

Garbage, don't buy. The horizontal bubble level is crooked so when the bubble shows level, the laser is angled upwards by about 2 inches at 6 feet out. No way to adjust this.

Great as a small level but the other functions are confusing to use and not well thought out.

Useless, light on laser is so weak you can barely see it in the dark. If I had not disposed of the packaging I would have returned it.

It's good kinda but it's bad doesn't have a magic to use it on the Mattel !!Don't buy it if you want to use it on the Mattels !!!

A laser level that... well, isn't level. I need to use another level to make sure the laser is level. I might as well attach a laser pointer to my other level. After hanging pictures on the wall and taking a step back, I realized that everything was off. I thought it was weird, so I tried again. Same Result. I did some investigating and realized that the level tube is glued into a hole that is too big. This is making the tube uneven and then the whole thing unlevel. Cool concept multipurpose tool but its basic function is to be a level and it fails at that.

Doesn't have a sheath or anything so I cut myself on it, and then proceeded to throw it in the trash.

Horrible bolt system. Save your time and money shop somewhere else. The bolts become captive when you insert them. Had a heck of a time getting them back out to adjust the mount. And it tore up the wall and took an extra 2hours to mount this thing. They need to rethink the design of the mounting system. I've hung several televisions and never have I dealt with such nonsense. Not to mention that they never tell you anything about it. Never again!

Received this mount a few days ago and it looked great taking it out of the box. However, the mounting plate is only 16" wide, so the lag bolts in the widest position would only be about 15-15.5" apart. It's not the end of the world, but the fact that the plate isn't designed to fit a standard stud width just frustrates me. I'm sending it back and buying something else

Very difficult to put together for a large tv, took a while to figure out how to angle the piece that attaches to the tv. I would not recommend to anyone unless if a professional was going to do the work.

Did not fit the TV and it was in the range specified

Could not support a 55 inch curved TV. Arm bent and 2 screws popped out of the wall

Not happy at all. The cheap bolts that come with it two out of the 3 mounting bolts heads broke off. So had to go buy better screws. Then when I finally got the mount installed it was a pain to get the tv up there. To hard to do by your self like they said it is. Now two days later I noticed my tv was not str8. Yes the arm is already bent. This product is trash. Plus it was to hard to open and move. Do not buy this product