5 items
Compare
Compare
All Features
Differing
Guitar bass pickup/EQ/ PotentiometerSee Similar
1set of 2 Zebra Faced Humbucker Double Coil Pickups Electric Guitar - Guitar bass pickup/EQ/ Potentiometer
Kmise
lotmusic Wiring Harness Prewired 2v2t 3way Toggle Switch Jack 500k Pots for Gibson Replacement Guitar- 1 set - Kmise
Kmise
4pcs Speed Control Knobs Black for Gibson Les Paul Replacement Electric Guitar Parts - Kmise
lotmusic
1set ABR-1 Style Tune-o-matic Bridge & Tailpiece Chrome for Gibson Les Paul Gear Replacement - lotmusic
Kmise
Kmise 1pc 6 Saddle Hardtail Bridge Top Load 65mm Chrome Guitar Parts - Kmise

Side by Side Comparison of: Guitar bass pickup/EQ/ Potentiometer vs Kmise vs lotmusic

Learn More
All Features
Differing
Learn More
Guitar bass pickup/EQ/ Potentiometer http://ecx.images-amazon.com/images/I/51JMIvtFbDL._SL160_.jpg
1set of 2 Zebra Faced Humbucker Double Coil Pickups Electric Guitar - Guitar bass pickup/EQ/ Potentiometer
Add to Whishlist
Kmise https://images-na.ssl-images-amazon.com/images/I/41wrOKogGmL._SL160_.jpg
lotmusic Wiring Harness Prewired 2v2t 3way Toggle Switch Jack 500k Pots for Gibson Replacement Guitar- 1 set - Kmise
Add to Whishlist
Kmise https://images-na.ssl-images-amazon.com/images/I/51HHmp3ha-L._SL160_.jpg
4pcs Speed Control Knobs Black for Gibson Les Paul Replacement Electric Guitar Parts - Kmise
Add to Whishlist
lotmusic https://images-na.ssl-images-amazon.com/images/I/41yvBZGdl5L._SL160_.jpg
1set ABR-1 Style Tune-o-matic Bridge & Tailpiece Chrome for Gibson Les Paul Gear Replacement - lotmusic
Add to Whishlist
Kmise https://images-na.ssl-images-amazon.com/images/I/51JdWLQsVjL._SL160_.jpg
Kmise 1pc 6 Saddle Hardtail Bridge Top Load 65mm Chrome Guitar Parts - Kmise
Rating info
eComparisons Score
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users
8.8
7.8
8
0
0
User Rating (Amazon)
User Rating (Amazon)

Five Star Reviews:

67%
They are actually great sounding pickups
June 14, 2017
Great pickups for the money. Sound as good as GFS and the other Artec imports. I changed the cermaic magnets to alnico V and IV. Sound terrific. If you are going to do this you need to know that these pickups use a thicker magnet with longer slugs. YOu can still make it work but the slugs(not the screws) at the top of the pickup will be pushed up. Doesn't effect the sound, just the look slighty. Keep in mind these pickups are great stock and you don't have to mess with them. I bought these to play around with magnets and ended up really liking them. I bought silver baseplates and installed Alnico IV in the neck and a rough cast V in the bridge for tamer sound
Yes they are that good.
February 3, 2017
I fully expected these to be garbage. I read the good reviews, ya right...11 dollar pick ups. So I got a set to check them out. This could be the best deal on humbuckers anywhere. These do sound as good as folks say. Very clean and pure or turn it up for a very vintage rock sound. Push them further and they shred just fine. Better than any set I've tried under the 200 range. These were 14000 and 10500 resistance ....pretty similar to an overwound vintage coil. Best 11 bucks my Les Paul has had in it.
So much better than expected!
November 14, 2016
I was really skeptical, but needed some cheap pickups for a project guitar that I was given, and that's worth almost nothing. So I took a (small) chance on this inexpensive pair. They are extremely high output. The hottest pickups by far of those in all the 11 electric guitars I own. I usually prefer lower output, vintage pups, and so frankly, I didn't expect to like these. I expected shrill or muddy, lifeless tone for that price. And I have to say, that the tone is fantastic. Well rounded, but cuts through. The bridge pup is sharp, but not shrill, while the neck pup is strong and bass-ful but still defined and not muddy. I just really can't believe how good they are. I have Seymore Duncan JBs in my SG and I think I prefer these. Crazy!
and turned out to be a quick and easy swap. The Zebra fit perfectly in the stock ...
November 5, 2015
These inexpensive pickups ROCK! I spent some time reading the reviews, and for the most part, I was encouraged, so why not. The bridge Zebra went in the bridge position of an Epiphone ES 339 I bought used and abused. The stock pickup was dead, and this was a no brainer, and turned out to be a quick and easy swap. The Zebra fit perfectly in the stock epiphone pickup ring. No sweat. I gave it 5 out of 5. It's bright, it's loud, it's crunchy when I want it to be. Watch your grounds, do good work soldering children, and just close your eyes and think Seymour or Dimarzio for a fraction.
Game changer!
March 2, 2015
WTF?! I knew pickup companies had been over-blowing their prices but if anything chisels that into concrete atop the mountain it's these. I was trying a few different pickups in my newest scratch build. These are the winners. I saw the price and said why not. I didn't know they would be just as good as any Duncan or Dimarzio and I've tried many! Rich tone is pouring out of my amp. These are a no-brainer. Anyone that says otherwise couldn't tell in a blind test. The neck metered right under 8K and the bridge almost 15k. The color is definitely the standard cream and black.
52%
Work great, not the best.
August 29, 2017
As described, installed them on a lp copy. The pots are very sensitive as most of the variance is within the first quarter turn of the knob. After that the tone and volume don't change much.Also, each knob turns with different resistances. I suppose that is a plus as I can tell which knob.I'm turning by how tight or loose it is....but not really, it's annoying and cheat feeling. I'd order these again though if my budget was tight.
Bought for kit ES-355
May 7, 2017
Just what I needed to complete my kit guitar.Couldn't be better.Quality on par with the more expensive electrical parts.Wiring was good. Solder joints were great.Switch is a bit cheap, but just as good as what comes on the Epiphones anyway.....
Works great.
December 7, 2016
I can't say much more than it worked exactly the way it was supposed to, and I was able to repair a guitar that had been sitting unused for over a year. The solder connections looked good. You can't ask for more for the price.
Nice Harness
September 23, 2016
I build my own wiring harnesses most of the time. When I don't I order these. I have used these for several years on guitar builds and they are always an easy install and problem free.
Smaller but functional... to me a $150 + =upgrade
September 2, 2016
I used this setupbto change a 1v 1t to a 2v 2t.Suprised how easy it was to incorporate this setup into space provided.Correct pots 2 a500k and 2 b500k..... wired by disconnectting from switch and connectting one pickup to each pot with open terminal.
Guitar wiring harness tell-all review!
July 20, 2016
Since it seems the information surrounding this products is vague, I thought I would give a review with as much info as I can to help those who are thinking about buying, and or bought and have questions. I will also address some of the concerns I found in the reviews/questions areas.First off, my opinion of this product. I am very happy with it, and it did what I needed it to do, which is replace the crappy wiring in my janky old Martin Les Paul copy with two humbuckers. This product is everything I hoped and expected it to be. I considered giving it four stars because it is a lower end harness, but ultimately I figured if peeps are buying and eight dollar harness, they ought to know they're not getting top of the line. Okay, onto the info:#1 - Are the pots small? Answer: Yes. They are likely smaller than what you are replacing. They were smaller than what I was replacing, both in the body and in the threads. However, if you use a washer, and tighten everything properly, there should be no issues. My old knobs fit perfectly on these pots. No issues there. They're just smaller.#2 - Is the switch huge? Answer: I didn't think that it was particularly huge. That said, it was slightly larger than my original switch, and I did stress a little that I was going to have to unsolder/resolder the switch, however, with a little finesse and uncharacteristic patience, I was able to work the switch through the cavity of my guitar and get it into place. One thing I didn't like about the switch was that the plastic knob dealie-bob does not appear to come off easily (it does not screw on). That didn't make it any harder to get through my guitar, but it did scrape a little on the way. Probably if I cared a little bit more, I would have covered it with masking tape. So, no biggie.#3 - Is it wired incorrectly? Answer: No. I installed it as is (as pictured here on Amazon), and it worked like a charm. That is not to say that it is going to be wired exactly like the current set-up that you are replacing. If you google Les Paul wiring (like pretty much everyone who answers questions on this page suggests that you do), you will quickly see that there are MANY ways to wire this type of setup. MANY. I think a lot of the folks who are saying "it's wired incorrectly" are actually basing that on not being wired how their current setup is wired, or what they're familiar with. So this is one method of many to wire it, but a valid method. Look at the picture, if that is not what you want, then find a different harness or wire it yourself, or buy this one and rewire it. But, based on my experience, it is not wrong, just maybe different than what peeps are expecting. That is my experience only, though, so carefully look over the wiring to make sure it's all good.#4 - Did it come broken? Answer: Okay maybe a little. Actually one of the ground solders had come apart during shipping. I can't speak to why or how this happened, but I think it might have to do with how it was packed/shipped, and not the product itself. In any case it was a quick fix, I soldered it while I was soldering the pickup wires to the pots. No biggie.#5 - Where do you wire the pickups to? Answer: This is a question I had, and also one that is asked a bunch in the questions. It's also further compounded by the description saying that you hook the pickups up to the switch. You do not hook the pickups to the switch! The pickups get wired to the volume pots. The hot (insulated, usually white) wire goes to the post on the pot that also has a wire going to the tone pot. The ground (uninsulated) wire gets soldered to the back of the pot with the other grounds. Do this for each of the two pickups (depending on your application).#6 - Where does that rando black wire that isn't attached to anything go? Answer: It's a ground wire that goes to the bridge. I already had a wire coming in from my bridge, so i just spliced them together.#7 - Does it make your guitar sound bad? Answer: No. This is the best my guitar has ever sounded. Granted, I put new pickups in, but there is nothing bad that seems to come from the wires, eg. hissing, hums, buzzing, etc... I experience none of that.I think that about covers it. I hope this is helpful to those who have questions and concerns about this product.
64%

There are no reviews yet

0%

There are no reviews yet

0%
Good hardware.
May 2, 2017
Works well and really dressed up my Squire strat. I removed the saddles from the tail peice and attached them to the factory tail peice of my Squire as the saddle is a little different. Looks more like my American made strat plus deluxe now. I like having a cheaper guitar for taking it on trips. Don't want to bring an expensive strat on business trips just to keep my chops up.
The $6 I invested in this hardtail bridge seemed too good to be true
March 3, 2017
This product is exactly as advertised. Works perfectly. I'm working on my first guitar build and I did not want to spend much money on a bridge in case the whole thing is a failure. The $6 I invested in this hardtail bridge seemed too good to be true. Wrong. It's better than good. I'm still kind of amazed that they can sell these so cheap.It bolts on properly, all of the adjustable features work properly, and they even included the right-size allen wrench for adjustment. Kudos to this AMERICAN company for making a solid product at an unbelievable price without any hidden fees/problems/snags.A word to consumers: chances are if you are shopping for a hardtail bridge then you know what you're shopping for. (and, again I cannot recommend this one highly enough!) But, in case you are unsure of what kind of bridge is what, THIS is a hardtail. It sits on top of the body of the guitar. The strings do not go through the body and there is no trem ("whammy") bar attachment. (just sharing b/c I had never used a hardtail bridge previous to this one and was a little unfamiliar until I researched it.)Again 5 stars for this excellent product from Jersey.***correction to this review: upon further research into LOTMUSIC, the company that makes this bridge, I found that it is NOT an American company. Not sure if the product is manufactured in China, or in the USA by a Chinese owned company. Either way, this does not change my opinion of the high quality product. (although I do feel like a bit of a chump for assuming that since it ships from New Jersey and arrived 2 days after ordering that it was produced in the USA.) Still an unbelievable deal on a solid product.
Good, easy to install bridge
January 26, 2017
This would be a great bridge for a first project build. I am a fan of top-loading bridges generally but they are especially easy to install as they don't require string-through holes and the extra ferules and such to make them work. Quality-wise, this works and cost under ten bucks. All the adjustment screws work and there is enough travel to allow some leeway as far as getting the bridge in just the right place. It is not the same quality as, say, a G&L top-loader, and feels a bit thin and insubstantial but I've had no trouble with the thing. I'll update this review if it corrodes and falls apart after six months of use but for now I'm calling it good.
I have a stock Fender tremolo bridge that has those vintage saddles that I really don't like because I rest my hand there
May 19, 2016
I purchased this hardtail bridge for the saddles. I have a stock Fender tremolo bridge that has those vintage saddles that I really don't likebecause I rest my hand there. Well these saddles ($6.00) are closer to the ones that came stock on my Fender American model.It feels much smoother on my hand. I simply swapped out the old ones, keeping my original bridge right where it is and installed these newsaddles which work incredibly well and feel comfortable, they even look a whole lot nicer than what I had prior. I only needed the saddles. For $6.00 you can't get a sweeter deal!! If you do need a bridge and don't mind it being fixed, well this hardtail bridge is made sturdy - it will definitely give your guitar added sustain. For under $30.00 you can really upgrade a fair guitar with parts that Amazon has made available.
A Quality Component!
August 1, 2015
I bought this for a DIY project, a lap steel guitar. Though my design which includes a separate bridge precludes the functioning of this compensated bridge, I bought it for the style. Also, it comes with five screws to mount it. Other models more appropriate to my project come with only two screws. I light the overkill and the looks.
great replacement parts
February 6, 2014
Bought this because i could not find a single saddle to use as a replacement part. Excellent condition. would buy again

Four Star Reviews:

10%
They work.
March 2, 2017
The pickups weren't labeled which was neck and which was bridge. Not bad for the price. I get a little bit of ground hum, even though my wiring is definitely grounded. Still, pretty happy with them.
Four Stars
February 6, 2017
Looks excellent on my black LP-ish guitar, although these are quite tune on the bright side of the spectrum
Four Stars
June 2, 2016
Good for the price.
Not bad for a few bucks
March 2, 2016
Pleasently surprised by these cheap imitations; slapped them into a cheap guitar and turned it into a screamer. Not bad for a few bucks, ha ha. If you've got a lackluster cheapie sitting around your house, stick these into it and liven it up a bit.
Good humbucker sound for less money
January 8, 2016
Good humbucker sound for less money. Professional look with all screws and frames. There might be better humbuckers out there, maybe, for 20 times more bucks.
17%
Good, cheap, as described.
July 24, 2017
Came just as expected, I knocked off a star cause I don't think I've ever seen pots so small, but I figured that going into this purchase. Perfect for a guitar build, cigar box guitar, and even as a replacement/repair for another axe. Just don't expect USA quality and you'll be ok.
Can't complain
March 24, 2017
Came very quickly and as described. Packagining was only a plastic bag though but can't complain for 9$
Does the trick!
December 1, 2016
Simple, cheap pots that work. They give plenty of extra wire which is nice-
Four Stars
February 19, 2016
came just as described
work's the way it's supposed to
February 17, 2015
It works good had to fix some of the soldering that came apart no directions but easy installation
Good replacement......
January 18, 2014
Used this in my SG.... now it doesn't sound as good as the original but it still works and sounds great! Tip for installing try replacing these one potentiometer at a time without cutting any wires. Once everything is in disconnect the pickups and solder end to the volume pots and your done!
12%

There are no reviews yet

0%

There are no reviews yet

0%
No screws & small, but worked for me
December 11, 2016
Ok quality! Read the description- it's smaller than normal and does not include screws.
Alright.
November 25, 2016
Good but smaller than expacted
Four Stars
September 11, 2016
4 stars based on incredible value. Very simple product that does what it's supposed to so.
This bridge was a perfect well made part that I needed to practice cords ...
September 25, 2015
I needed this bridge to finish making a practice old guitar neck, without the guitar body. This bridge was a perfect well made part that I needed to practice cords in the car while my wife is shopping.
Four Stars
March 25, 2015
Great value
Did not fit my guitar but is still a good product
May 7, 2014
I ordered this to fit my guitar. It seemed to be a quality product, just didn't fit and I had to return it. The seller was quick to refund payment

Three Star Reviews:

10%
excellent pickups!!
October 3, 2016
If you are on a budget then i recommend these pickups. Trust me they deliver. I have 4 guitars and have these installed i was skeptical at first. But to my surprise i was blown away. Buy these!!
Alright, but be prepared to email the seller
January 15, 2016
The bridge pickup sounds alright. The neck pickup had a wire that was too short, and makes things very difficult to wire.

The bigger problem is the quality control. First I was sent two neck pickups, both of which were corroded, tilted and of general poor quality.

A month later, I recieved the correct ones, which were much better, aside from a short neck pickup wire.
Just received my set. Both had a 'B' on ...
November 12, 2014
Just received my set. Both had a 'B' on the back so I was concerned I got two bridge pickups. Tested the resistance and one was 13.91 and the other was 13.88. So it's safe to assume they are both bridge. The add states neck is 8, and the bridge is 15. They're cheap so I'll hold on to both for bridge pickups on future builds.
Great low cost pickup set, but one doesn't work
October 19, 2014
I ordered these to replace a very microphonic set of pickups in a guitar. Installed the neck pickup and everything went okay, but the bridge pickup was dead. That's when I tested it. Lesson learned, test the pickup before installing it. The neck pickup is very good though, much better than expected. For the cost ($15 at the time I purchased) it is a great deal for 1 pickup.
Good but not great
August 1, 2014
These will revive an old beater guitar but don't expect too much more. I installed these in a Lyon by Washburn LI15 $90 beginner guitar. They had some strong screechy harmonics on some strings and a rather flat sound compared to the stock pickups which had a stronger output and a better metal drive. After an hour of tweeking and playing they were livable. Don't buy these thinking they'll do miracles in a higher end guitar, they did nothing great for me. When I stuck my screwdriver to the magnets they felt a little bit weaker than the stock pickup magnets.. These may be an upgrade if your ax is a First Act though. I will not buy again..
11%
Wired incorrectly
December 2, 2016
Wiring harness came wired incorrectly. I had to resolder it, defeating the purpose of getting a prewired harness. If you've never done this before, might want to check a different option, or learn from your local guitar shop tech before going at it on your own. For the price, it was fine, but the extra work was supposed to have been avoided.For those of you looking for instructions, they are really simple if the product comes wired correctly. Assuming it did, then all you need to do is connect ground to top of volume pot, and hot to the outside tab. Do this for both pickups and you're solid.
seems a good value.
July 26, 2016
7-26-16. Just installed in Washburn HB-35. Seems okay. Can't beat the price.Solder joints seemed ok, in correct place, was able to just solder pickups leadsonto volume pots and was done. Was barely able to fit 3-way switch in place as it is bigger than original,but was able to.
Good Quality, Bad Wiring
May 31, 2015
Nice quality pots and wires and the switch is really nice and sturdy but the wiring is all messed up. I have 4 volumes on my guitar now but oh well; it works until I can afford a nice wiring harness.
Three Stars
April 20, 2015
it was ok
It was nice it came pre-wired
October 10, 2014
A decent harness for the price. It was nice it came pre-wired, but the capacitors for the tone knobs were soldered on the wrong post for the potentiometers but other than that works well.
great for parts, but wiring is horrible
October 13, 2013
components are decent for tinkering or repair jobs, but the wiring for the volume pots are backwards. make sure to look up how to wire for your specific application and re-wire this harness yourself! its easy to do in a few minutes.
6%

There are no reviews yet

0%

There are no reviews yet

0%
Does what expected, there was a corner missing chrome (chipped off)
September 21, 2017
For the price, you can't exptect TOO much, but does work well, just wish it hadn't come with chipped off chrome. Noticeable, but still happy.
Three Stars
March 21, 2017
Did the job but cheaply made....but was cheap too so im not complaining
Three Stars
March 20, 2017
As promised. It works.
Three Stars
April 19, 2016
really small
Three Stars
December 16, 2015
no problems with it so far
Good for some guitars and not for all.
February 14, 2015
This unit is designed to replace one of a similar style. I will not cover the tremolo hole if your application is to replace a tremolo system on your guitar. what it is for is a new bridge on a new body is its best application. Action adjustments are small and you may hear buzzing from the frets.

Two Star Reviews:

5%
I received 2 neck pickups instead of 1 bridge and ...
February 14, 2017
I received 2 neck pickups instead of 1 bridge and 1 neck. The measured about 7.4k. Package was also missing a screw...but they were cheap, I guess.
Low output, lots of noise
February 5, 2017
Low output, lots of noise. I ended up not using these.
One broken pickup-One working
November 22, 2016
One pickup worked fine. Pretty hot output. The other one didn't; when I opened it up to look inside, I found the copper leads around one set of the magnetic poles pieces broken. Still, a half decent price for receiving one functional, if not stellar, pickup.
A little better than stock but very bright
December 3, 2015
Ceramic. Varied quality. My set was very close as in OHM K. A little better than stock but very bright. Better for high distortion and not blues. I'll toss them in a box for something else. Didn't bring out the tone I was looking for. I'll have to try another brand. Really don't want to spend $120 on Seymour's.
I received an identical pair instead of a matched pair ...
September 11, 2015
I received an identical pair instead of a matched pair. Both were marked N for neck. I needed one for the bridge as well. Sent them back and got something else.
Only half good
May 7, 2015
One of the pickups was defective, I checked all the internal wiring which was correct so assume it was a shorted coil. The other was fine. Not a big deal, they were so cheap that I ordered them on a whim, just this time my gamble didn't pay off but at least have one pickup I can use for a future project.
6%
Junky
May 4, 2017
Junky
too cheap, the tone pots broke down after about ...
February 22, 2016
too cheap, the tone pots broke down after about ten hours of playing time on the guitar, plus they were not wired correctly to match a les paul..spend the extra money and get a quality wiring kit..
Two Stars
June 2, 2015
You get what you pay for
unfortunately I had some bad solder joints that I will need to repair
March 20, 2015
The harness was new, unfortunately I had some bad solder joints that I will need to repair. However the quality of the pots and switch seem very high.
Awesome and super easy
January 28, 2014
It can't get easier than this. I was modifying an old 1960 Teisco and bought to switch out the pickups and electronics that had long-since burned out. It took just a few minutes to solder and install everything. The volume and tone are great. The guitar has no hum at all - and I'm using cheap P90s on a hollowbody. Couldn't recommend this set-up more!**Update** After a few months, the threading on one of the tone pots slipped and pot would spin in the guitar instead of the pot actuating and changing the tone. SO, I pulled that line out and replaced the tone pot. It seemed like a simple fix.In the process, one of the welds from the other volume knob came loose. So, that line was pulled and re-soldered.Just as I had everything in place and almost done, the volume knob threading started to slip as well. The pot wouldn't stay in place, it just rotated as I tried to tighten it down. So, another volume knob was required.This is a CHEAP option. It's not a quality option. The posts and threads are undersized AND easily strip to the point of not holding the pots in their proper position. I recommend finding something with a higher quality!
Wrong Wires
July 8, 2013
The item shipped in a timely manner, the pots are not the best quality, but they are a direct replacement to the original pots found in the Ibanez GAX70 guitar, and the switch was also a direct replacement, the problem is the wiring, they send simple very thing wires instead of using coaxial shielded wiring, so now i have to get coax wiring, de-solder, clean the contact points and solder the correct wire in place.a bummer that the wires were not the ones in the picture, would have had bought different ones if i knew.
7%

There are no reviews yet

0%

There are no reviews yet

0%
It is useless without some kind of mod to hold it in ...
November 3, 2014
This is made for a Fender I tried it on a DIY PRS kit that has a similar bridge height to the Strat. The bride gets the height right but then the problems start. Without the string going through the body, there isn't enough tension to hold the string saddles in place. Not only does the saddle move side to side, it also rattles as it bounces up and down. It got two stars instead of one due to price. It is useless without some kind of mod to hold it in place.
Cheap
September 28, 2014
Cheap. But cheap price.

One Star Reviews:

8%
Shorting out
June 27, 2017
Shorting out bridge pickup
Don't do it!!!!!
December 15, 2016
These pickups are abosolute junk. Not labeled neck or bridge. I had the ohm them out to know which pickup went where. Good thing I did because one pick had a short in it. Don't waste your time with these. 100% garbage.
But they look cool! Not cool at all
August 30, 2015
A seen in pictures it should have been a 2 wire set up. Mine came as 4 wire which I did not want. The wiring was not long enough to solder to the pots outside of the guitar so i really had to work them in tight which made for a sloppy job. The bridge pick up is not as hot as stated and the neck pick up I received had a short to ground in one of the coils. But they look cool! Not cool at all!
waste of time/do not work
February 19, 2015
ordered these for a build
when they arrived i put a meter on them and both of them tested open
not good business practice to send non working pickups to customers
you would think that there would be some quality control involved

some of the other reviews say that they received some non working and mismatched sets
so buyer beware
Color
March 4, 2014
It says they are 100% like the picture. They are goldish in the picture. They came in white. Make sure you want white before you order
14%
One Star
August 12, 2017
Trash!
These are bad, bad
March 11, 2017
I would give these a 0 if it would still let me right a review. These are bad, bad, bad. First of all they are mini pots, but that is OK if they work. Second, they are wired wrong, that's OK I can buy better capacitors and wire them myself. The first time I wired the harness up, Gibson Modern, style nothing happened, a first for me. Oh well I have a few hours to kill I will wire it up Gibson 50's style. This time the bottom toggle down worked and the middle toggle worked but no upper toggle. One pick up doesn't come on. I poke around a while and what do you know they all start working. Alright, I start putting it back together and try it again. Oops nothing working again. I take it apart again and wiggle the connectors on one of the pots. Works, no it does not work, it worked and then it didn't work. One pickup came on, then neither. This is a regular party if you have half a day to kill. I went ahead and bought 4 full size pots for $20 dollars. I bet they will work. :)
One Star
November 11, 2016
Pots did not come up to rated copasaty
Not good, poorly built
April 1, 2016
Not good,poorly built,I wouldn't have given any stars but couldn't do a review without marking at least one
Pots arent Gibson Size Pots... Too Small
March 29, 2016
Pots were too small. Maybe would work in a fender but these are no where near Gibson Full Sized Pots. These are mini pots. Returned Item!
amateurish product
February 4, 2015
Extremely cheaply made, wire used was poor quality, solder was sloppy and random. I would not recommend or buy again......spend a little more and get a quality harness
11%

There are no reviews yet

0%

There are no reviews yet

0%
The holes for the intonation screws are drilled at an ...
November 23, 2016
The holes for the intonation screws are drilled at an angle, so there is no way to keep the saddles parallel to the string path.
Buyer beware
March 15, 2016
The Product in the description does not match the product in the question and answer section where the answers are from the "Seller." The sizes are different and this does not fit a Fender. If you just want to replace your saddles then I guess this is still a good deal.
Vote for Me
Vote for Me
Vote for Me
Vote for Me
Vote for Me
Pricing info
Old Price
Old Price
$5.99
Price
Price
$13.40updated: Mar 17, 2020
$9.99updated: Mar 7, 2020
$4.98updated: Mar 18, 2020
$10.14updated: Mar 17, 2020
$8.55updated: Mar 17, 2020
Features
Answered Questions
Answered Questions
-
-
-
-
Article Number
Article Number
0908801576888
0634458600439
0508801578037
0608801565928
0608801567359
Brand
Brand
Guitar bass pickup/EQ/ Potentiometer
Kmise
Kmise
lotmusic
Kmise
Color
Color
-
-
black
silver
chrome
Currency
Currency
-
USD
USD
USD
USD
Height
Height
74.8 in
31.5 in
4.7 in
31.5 in
11.8 in
Label
Label
-
Shenzhen Lotmusic Technology Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Length
Length
224.4 in
252.0 in
7.9 in
236.2 in
110.2 in
Manufacturer
Manufacturer
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technology Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Model
Model
-
A1329
A0005
A0086
A0051
MPN
MPN
lotmusic
A1329
lotmusic
lotmusic
lotmusic
Name
Name
-
English
English
English
English
Number of Parts
Number of Parts
lotmusic
A1329
lotmusic
lotmusic
lotmusic
Product Group
Product Group
Musical Instruments
Musical Instruments
Musical Instruments
Musical Instruments
Musical Instruments
Product Type
Product Type
INSTRUMENT_PARTS_AND_ACCESSORIES
INSTRUMENT_PARTS_AND_ACCESSORIES
INSTRUMENT_PARTS_AND_ACCESSORIES
INSTRUMENT_PARTS_AND_ACCESSORIES
INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher
Publisher
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technology Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Quantity
Quantity
1
1
1
1
1
Reviews
Reviews
-
-
Score
Score
7.6
-
-
-
-
Size
Size
-
-
samll
-
-
Studio
Studio
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technology Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Shenzhen Lotmusic Technologe Co.,Ltd
Title
Title
-
lotmusic Wiring Harness Prewired 2v2t 3way Toggle Switch Jack 500k Pots for Gibson Replacement Guitar- 1 set
4pcs Speed Control Knobs Black for Gibson Les Paul Replacement Electric Guitar Parts
1set ABR-1 Style Tune-o-matic Bridge & Tailpiece Chrome for Gibson Les Paul Gear Replacement
Kmise 1pc 6 Saddle Hardtail Bridge Top Load 65mm Chrome Guitar Parts
Weight
Weight
2.0 oz
0.5 oz
0.1 oz
1.2 oz
0.7 oz
Width
Width
114.2 in
236.2 in
6.3 in
153.5 in
102.4 in
Feature
Feature

The item is shipped from USA.The delivery time to US region is about 1 to 2 BUSINESS days!

Pls notice the shipping time!!

The item is shipped from China.The delivery time to US is about 7 to 15 BUSINESS days.

The item is shipped from USA.The delivery time to US region is about 2 to 5 BUSINESS days.

Pls notice the shipping time!!

The item is shipped from USA.The delivery time to US region is about 2 to 5 BUSINESS days.

Pls notice the shipping time!!

The item is shipped from USA.The delivery time to US region is about 2 to 5 BUSINESS days.

Pls notice the shipping time!!

Sorry, there's no review at this time. Try changing the filter or leaving one.
Share your opinion
Please enter captcha code
captcha
Send