2 items
Compare
Compare
All Features
Differing
Hakko
Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow) - Hakko
X-TRONIC
"X-TRONIC" MODEL #4010-XTS - 4000 SERIES - SMD - ESD SAFE - NEW Centigrade/Fahrenheit Switch - Digital Soldering Iron Station - 10 SOLDERING TIPS - 1 EXTRA HEATING ELEMENT - 1 ANTI-MAGNETIC TWEEZERS - 1 5X MA - X-TRONIC

Side by Side Comparison of: Hakko vs X-TRONIC

Learn More
All Features
Differing
Learn More
Add to Whishlist
Hakko http://ecx.images-amazon.com/images/I/41sCMxh%2BAYL._SL160_.jpg
Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow) - Hakko
Add to Whishlist
X-TRONIC http://ecx.images-amazon.com/images/I/51KKwg06m1L._SL160_.jpg
"X-TRONIC" MODEL #4010-XTS - 4000 SERIES - SMD - ESD SAFE - NEW Centigrade/Fahrenheit Switch - Digital Soldering Iron Station - 10 SOLDERING TIPS - 1 EXTRA HEATING ELEMENT - 1 ANTI-MAGNETIC TWEEZERS - 1 5X MA - X-TRONIC
Rating info
eComparisons Score
eComparisons ScoreThe "Comparison Score" Is calculated based on the average number of times this item was compared with other items in this category by our users
9.6
8
User Rating (Amazon)
User Rating (Amazon)

Five Star Reviews:

87%
Fantastic!
July 28, 2017
All I can say about this thing is "It's Fantastic!" After using an el-cheapo soldering station for a number of years, this is like moving from driving a Yugo to driving a Cadillac (like moving from a Citroen to a BMW for you folks on the other side of the pond). It comes up to temp in under a minute (my old one took 5 minutes or more) and holds that temp with ease. The handset is lightweight and easy to maneuver and the stand stays right where you put it. I haven't even started to explore the range of alternate tips yet, but there seems to be one for just about every task. If you don't have a station yet or if you've got a cheap one, do yourself a tremendous favor and get one of these.
Great soldering station
July 16, 2017
I bought this to replace a very old temperature controlled solder station I got back in the early 70's. What a difference technology has made! This station heats up in about a minute and maintains temperature very well, even when "loading" it with a large gauge wire. I've only used the supplied tip, so far, and it has worked quite well for discrete component soldering. I don't anticipate doing any surface mount work, but think that with an appropriate tip it could be done using this iron.
I use really nice soldering stations at work from time to time
December 28, 2016
I use really nice soldering stations at work from time to time. I can get really good results from this for a fraction of the price of the industrial grade stuff. With some flux, thin solder and this guy, the limit is my skill and attention to detail.
IMHO, this is the new standard for soldering stations.
December 26, 2016
Just excellent. It replaces a name-brand unit which literally destroyed itself and its iron when I partially inserted the iron into its holder. The Hakko, in the same situation, just melts a bit of plastic. Although I find the sponge arrangement a bit strange, that's not a major issue. Another plus: a wide variety of replacement tips are readily available at a reasonable price.
She sure is ugly but I still love her!
August 13, 2015
Do yourself a favor and get this station. It is worth every penny I spent on it. It heats to 700 degrees in about 8 seconds and the grip to tip distance is the shortest you can find on a station. There are a ton of tips for the Hakko that you can find. They are cheap and can be changes in bout 10 seconds with a cool iron.Grip is comfortable and made from a soft but roughed up foam and the cord is a soft silicone that will not fight you when bending. the stand is one of the best features with the wire cleaner tucked away and the sponge in a little tray with a unique design. The water is drawn up from a reservoir with the use of two little sponges.I used to use a 40W iron for years and had a lot of trouble justifying this purchase price, but I did my research and read the reviews and finally bit the bullet. I can honestly saw that this unit was worth every penny I paid. It made my project infinitely easier and I know that the craftsmanship of this Hakko will keep it running for years. Do yourself a favor and get one is you are still using a pencil iron. I promise you will not regret the purchase.
Buy it already.
March 17, 2015
Why I've waited so long to buy a real soldering tool I have no idea but I'm in love. The temperature comes up to setpoint and changes amazingly fast. I turned it on and soldered 2 wires together in the time it would have taken my old iron to start feeling warm. My initial impressions are that its well made. If I had to find fault, one must actually read the directions to figure out the temperature changes. Once you read it makes sense.Update--Had a chance to desolder some components from a PCB and it worked great. Then I soldered a lug onto 8GA wire. Same great performance. The latter I've only previously successfully done with a torch because my cheap irons just can supply the heat.
68%
Four Stars
August 13, 2016
I like it well grate costumer support OK update time I have had mine for some time now and I wood not trade it for any other brand Iv seen so fare that's near this price range parts are easy and cheep to get free shipping from X-Tronics USA in Lincoln NE cents my first purchase I have ordered a seconded iron assembly witch I have a big chisel tip on for heavy soldering and use it for a back up for my main iron in case I have to change out a heating element in it and a seconded magnifier lamp I have replaced the bases on both lamps to spring loaded clamps which are far more stable and can be used anywhere I chose from clamping on my benches edge or on the device I'm repairing some times I clamp 1 next to my drill press for drilling precise holes circuit boards
The tips are good quality and if you clean them with every use ...
June 29, 2016
I use this setup several times a week. The tips are good quality and if you clean them with every use they will last a very long time. Comes with a spare heater element but I haven't needed to swap out the element yet. The iron heats up quickly to a max of 896 degrees F. The only complaint I have is I wish the power switch was on the front or the top rather than the side, it makes it a bit difficult to switch on and off as I have a cramped bench. I use mine for RC and Arduino projects, so I'm working with large power wires and small signal wires and it works great on everything. I use the light a lot, it's very useful with the magnifier. This is an excellent value.

For accessories, I have purchased MG Chemicals liquid flux, needle-tip flux bottle, MG Chem desoldering braid, a generic solder pump, a wire tip-cleaner, and a Panavise.
Excellent Product and "WOW" Service
January 22, 2013
I purchased my 4010-XTS the beginning of October 2012. I have only recently used the soldering station and I was very impressed. It heats quickly and holds at the temperature I set it to. I've never had a soldering station before, but I've owned a couple of soldering irons. There is no comparison. This is so much better. Plus it come with 10 different tips including the one on the iron. How good a deal is that? Needless to say, I'm very pleased.

Here's the best part of my story.
Even though I only just recently used my soldering station I have used the magnifying lamp several times. I don't know that much about electronics, so to help myself learn I purchased a Radio Shack Electronics Learning Lab. The magnifying lamp has been really useful for identifying resistors and reading the tiny print on capacitors, etc.

Accidentally I left the lamp on over night and somehow that caused the fluorescent bulb or the electronic ballast to get weak causing the light to barely glow. Hoping it was just the bulb I took the lamp apart to see what the wattage was. It wasn't marked so I called X-Tronics to find out. I spoke to someone named Jim who was as nice and friendly as one could wish. I told him how happy I was with the soldering station and that my lamp had quit working and that I was simply calling to find out about the light bulb. He apologized for the problem and said they would send an entire new lamp out to me free of charge. He took my mailing information and that was that. He never asked how old it was or anything.

That's what I meant in my title about "WOW" service! How could I not immediately get this review done. I definitely recommend this company.
Great for the price!
February 25, 2012
I just bought my second one of the these. For the price you can't beat it. I'm a tech with 30 years experience and do a lot of soldering work and rework. At my job we use Hakko FX951 soldering stations which are pretty much a professional standard but they are pricey ($225) and I wanted something for home that was comparable in usefulness without the high cost.

If you do much soldering then you know that regular pencil irons take forever to heat up, do not hold their heat well - especially when doing heavier work like soldering 12 gauge wire to lugs, etc, - and one temperature does not fit all jobs. You need lower temperatures for fine work/rework on board components and higher temperatures for heavier wires and components.

The X-Tronic 4000 is an excellent tool for the cost and is quite comparable to the Hakko FX951 in most regards. It heats up even to the highest temperature settings very quickly (about 30 seconds or so) and in use it holds it's heat constant to within a few degrees of it's setting.

The only features which it lacks, compared to the Hakko, and which is also why it costs so much less, are,

1: The X-Tronic does not have hot-swappable tips. The Hakko has insulated tip holders so that you can instantly swap tips by hand without having to wait for them to cool down first or use any tools. On my job I need to keep switching between a variety of tips so this feature is a must, but at home I typically am only using the iron for the single whatever task at hand, like repairing headphone wires that the dog chewed into, or assembling a kit. So I put whatever tip I need to use on the iron first, and then if I do need to swap tips without waiting for cool down then I can live with the inconvenience of using pliers to handle the hot tip.

2: The X-Tronic has no "sleep mode." The Hakko, and other expensive stations, have a switch or sensor that detects when the iron is placed back into it's holder or isn't in use, and puts the tip into an idle/low temperature state from which it can heat up very swiftly when you pick it up for use again. This is not only a safety feature which reduces the risk of burns but also saves on electricity and extends the life of the tip. But again, at home, I'm not using the iron all day long, and I put it back into the holder when not in my hand, so it's not a big deal.

3: A: The temperature display on the X-Tronic is in Celsius rather than Fahrenheit degrees, so if you aren't accustomed to this just note that a typical low temperature of 700 degrees F is about 371 C and a high of 840 F is about 449 C, and mark the corresponding spots on the dial with a Sharpie or something. B: The X-Tronic's rotary dial for setting the temperature is a bit coarse, meaning that getting it EXACTLY to 385.2 may be problematic, but really, the difference between, say, 384 and 386 degrees is of no practical consequence to any normal application of this tool.

A few other notes and observations:
The X-Tronic comes with a good variety of tips from fine conical points to wider rounded and flat chisel tips suitable to many applications. The sponge provided for wiping tips clean isn't a perfect fit for it's place in the holder, at least with the one that came with mine. But serious solderers use the Hakko or similar wire type sponges which you can get for around $10 instead anyway, and the X-Tronic's sponge holder is a handy place to keep the little ziplock bag containing all the tips. The construction of the X-Tronic is sturdy. I've dropped the iron and knocked the whole thing - base and holder - onto the tile floor a couple of times with no harm to it. The iron's cord is flexible and heat resistant enough. The customer service and warranty when you get this through Amazon's seller is excellent according to all the reviews. (I haven't had any problems with mine so I'm trusting other people's reviews on this.)

So in conclusion, the X-Tronic 4000 is a great choice for anyone who wants a serious, rugged, and professional quality soldering station for general use without spending three times or more on a top of the line name brand model intended for heavy duty industrial use loaded with every possible feature.
Review X-Tronic 4010 digital soldering station
July 20, 2011
I bought this soldering station to replace a standard soldering iron. I have never owned a soldering station before .

The unit was shipped quickly and arrived well packaged. It comes with a wide array tips and even in extra heating element. The unit appears very well made. The cord going from the base unit to the soldering unit is long enough and very flexible so it's comfortable and use. There is a knob on the front to set the temperature and a digital display that shows the tip temperature in degrees centigrade. When the station is turned on, the numbers on the display rapidly increase until the set temperature is reached, so if the numbers aren't rising, the tip is hot. This makes the centigrade display useful even for those used to farenheit. It also comes with a holder and a sponge for tip cleaning.

In use the soldering station is great. It heats very quickly, I wondered exactly how quickly so today I timed it. From the time I turned on the switch to the tip melting solder was 37 seconds. Thus far I've only used the pointed tip to solder fine wires to a circuit board. It went well, the station works well and is comfortable to use. I'm glad I bought this and I don't see myself returning to the old soldering irons.
The Mercantile Station support is excellent. The first unit I received worked but the display only showed the "C", no numbers. It was replaced immediately, no questions, no hassles, just immediate replacement, with an apology. It turns out they've sold 4 thousand of these with only 4 defective units. My experience with The Mercantile Station couldn't have been more positive.

Four Star Reviews:

8%
Excellent value for the money
June 23, 2017
Excellent value for the money, and tons of tips available. If anything I would have liked it to have a longer cord but the cord is a flexible silicone style (which is also presumably heat resistant.) The base is also very sturdy and heavy. I would like it to include storage for additional tips, that might be the only reason I give it 4/5
Excellent moderate use soldering station!
July 9, 2016
This is an awesome soldering station and works for hours on end without any issues. Also gets to peak temperature in less than 20 seconds upon turning it on. I only give it four stars because it does not have a sleep option to maximize the life of the heating element. Still an excellent buy and worth every cent!
Good, but the un-intuitive controls makes it not quite as good as the analog version.
January 15, 2016
Unless you only plan on soldering once or twice in your life and being done with it, this is a solid choice for anyone's first soldering iron.I've gone through several cheap 10-20 usd soldering irons and used a handful of cheap soldering stations. The soldering irons simply do not last for some strange reason. Even the 20 usd ones do not last much longer than the 10 usd ones. The tip replacements don't last and cost nearly half as much as the soldering irons themselves. The cheap soldering stations priced between 40-70 usd don't fare much better. Some of them are nothing more than a variac sold with a cheap soldering iron and a cheap stand.This on the other hand has lasted me months of heavy use. The tip it came with hasn't failed or even gotten dirty yet. It wipes clean every time. Everything from the chassis of the station to the soldering iron to the stand feel really nice. The small form factor makes it easy to transport. The cable connecting to the iron is rubbery and won't get in the way of soldering. The stand isn't bolted to the station so it can be moved around freely on your desk without having to move the heavier station. It even has some wire included for cleaning.It doesn't make sense to buy a cheaper soldering iron for anyone planning to do more than a few hot-fix repairs.
I'm Satisfied
January 6, 2016
Works good and has lasted for a while. There are better digital units out there, but you have to spend a little more. Be sure to read the manual and pay attention when adjusting the temperature; it is easy to knock the calibration off.
An Excellent Soldering Station with Unintuitive Functions...
July 18, 2014
This is a great value soldering station and, in my opinion, the best in its class!After a little over a year of usage, I would rate its soldering performance as "5-Stars." You really can't beat this station's performance anywhere in its price range. The quality of the Hakko FX888D is first-rate, exactly what one would expect from a Japanese product. But, like most products, it has its flaws (see below).I have used the FX888D for countless soldering tasks associated with DIY HiFi circuit boards and other small electronics tasks. In performing these tasks, I have used "specialized" soldering tips (the T18-D16 chisel tip is standard) with smaller tip mass used to solder circuit boards with small component "pads." One noteworthy point: THE TYPE OF SOLDERING TIP AND ITS MASS WILL AFFECT THE AMOUNT OF HEAT TRANSFERRED. And, the temperature at the tip will NOT necessarily be the temperature indicated on the screen, especially with lower mass tips (lower mass tips will be "colder" than the temperature displayed on the screen). All this is to say that this soldering station DOES NOT have a sensor at the soldering tip/handle assembly. Most, if any, soldering stations in this price range don't have soldering tip/handle temperature sensors. So, the Hakko FX-888D is no exception. Just be aware that what temperature you get at the tip is not necessarily what is shown on the screen when you change out the included trip to another type.As other reviewer's have noted, the two-button design of the FX-888D is less than noteworthy--"unintuitive" would be how I would describe it. Why Hakko designers have the "calibration temperature adjustment" mode on the "UP" button is a mystery. I, like countless others, have accidentally entered the "Performing a temperature adjustment" mode (as the instruction manual calls it) and a "mis-calibration" was made resulting in an inaccurate tip settings incongruent to display screen readings (can be hundreds of degrees off). I accidentally entered this mode by holding in the "UP" button for more than 2 seconds, which is what one would do IF we wanted (intuitively) to raise the temperature of the unit while soldering. Right? NO! Not according to Hakko designers. Holding in the "UP" button for more than two seconds actually puts you into the "Temperature adjustment" MODE and whatever digital inputs you put into the unit at this point WILL CHANGE THE CALIBRATION OF TEMPERATURE SETTINGS (as opposed to just changing the tip temperature) and the result will be in-congruencies between what the screen shows and what your soldering tip temperature is! This anomaly is why I deducted 1 star!What do you do if you, like I did, accidentally mis-calibrate the Hakko FX888D? There are two viable solutions.One is that you purchase a soldering tip temperature reading device/thermometer that will give you an accurate tip reading at high temperatures (not many "thermometers" out there that will do this). Then you can calibrate any soldering tip to the precise temperature setting the job requires. Hakko makes such a device (Hakko FG-100), as well as others.The second and cheaper solution is to reset the FX888D back to factory settings. However this, of course, puts one back at the start with possible inaccurate tip temperatures when using smaller mass soldering tips--BUT, AT LEAST THIS WILL MAKE YOUR SOLDERING STATION USEFUL AGAIN. If you choose to reset the FX888D, it is almost impossible to find documentation on how to do this. AND, many souls out there in Internet ether-land believe that there isn't a way to do this. I don't know why this factory reset information was NOT included in the owner's/instruction manual, SINCE it is so easy to accidentally enter the temperature setting mode to screw up the temperature calibration!Luckily, I have a friend who works for Panasonic, who has a friend who works for Hakko, in Japan. She was able to get me the official Hakko FX888D factory reset instructions. For those that need to reset the FX888D back to factory, default settings, here is the reset sequence:Resetting Hakko FX888D to factory "default" settings: 1. Make sure unit is "off". 2. Hold the "UP" button AND "ENTER" button down at the same time. 3. Turn on the unit. 4. Continue to hold down the two buttons until the screen flashes "A". 5. Release your fingers from all buttons when flashing "A" occurs. 6. Push "UP" button one time--the unit will display a "U". 7. Once screen reads "U", push the "ENTER" button one time to exit the reset mode. 8. Unit will begin to heat up to 750℉ (the factory calibration point) and stop at 750℉. 9. Unit is now reset to factory settings. (You can now set your temperature at the desired setting and begin soldering!)Another minor shortcoming involves the soldering iron "holder base." It frequently slides around when "wiping"/cleaning the tip on the cleaning wire. Suction-type feet would have helped. Maybe Hakko designers will make this change in future versions of this base. It does slide around quite a bit, especially on smoother surfaces.In closing, I would just like to state that I love the FX888D! It is one of the best investments I have ever made. After years of using those flimsy, cheap soldering irons you can buy at discount department stores and other big box stores, it is a plesure to use a precision soldering station like the FX88D. To think that I spent MORE than what I paid for the FX88D on all those pieces of junk! I don't know why I waited so long to get a bonafide soldering station. I highly recommend the FX888D (or the discontinued analog FX888, if you can find one) as an excellent, on-the-job performer. Just be aware of changing the calibration by mistake, which is a biggie...
Works great. Interface is not very good.
April 10, 2014
This soldering station seems very well built, and has quite a few nice features. I think it'll last a long time, and it is a MAJOR upgrade over the $20 120V constant-power iron I've been scraping by with for the last couple of years. I don't know why I waited so long to get a quality one.As many others have mentioned, the two-button digital user interface is not great. This station has quite a few features, but you'll need to read the manual and follow the instructions carefully to access them.There is one MAJOR problem with this unit. It is VERY easy to throw off its temperature calibration by hundreds of degrees accidentally. Changing the temperature calibration and changing the iron's current temperature are almost exactly the same procedure, and it's not immediately obvious that you're doing one or the other. I did this almost immediately after taking it out of the box, and it was extremely frustrating.Thankfully, I discovered a YouTube video that explains how to reset it to factory settings (this is not in any manuals or on the Hakko website). Otherwise, I never would have been able to set the correct temperature again, since I don't have temperature measurement/calibration equipment.
14%
Nice little soldering kit
December 15, 2016
This has been a fantastic kit for all soldering purposes -- the only thing I can really gripe about is that the lamp isn't really of much use on its own, but I don't think it was intended to be used as such anyway, with the giant magnifying glass built in. Having a regulated temperature setting (with display) is really nice and I still have not yet needed the replacement element, but I'm also not a particularly heavy user.
It's held up wonderfully and does what I've asked
April 23, 2015
I've been using this solder station for over a year now. I do mostly tube amplifier repair and building with it. It's held up wonderfully and does what I've asked.

Two cons though - first, the grip area has a tendency to get hot. Like really hot. Especially if using the iron for a while or in an odd position. Second - the magnifying light is a big piece of crap. it worked for about five seconds and has never worked again. I wonder if the company puts it in as your "first repair project". I dinged the package a star for these two things, but I would happily buy this again. I've got many, many hours on this station with no problems and less money invested than a good weller.
Great little soldering iron set for the price
December 6, 2014
Great little soldering iron set for the price. overall, you could get better, but in this price range I think it is a deal. It heats up quick, and solders flawlessly. seems well enough built, no major gripes. the only thing that was weird with mine is the knob to adjust temperature was not completely straight so it rubbed the box on one side when turned, easily fixed though by pulling it off just slightly to add space! Beyond that, no gripes with the actual iron, now, the magnifying light is a piece of garbage. (probably a good thing, means more money went into the soldering iron) I was using it a few days ago and the thing started smoking at the base. needless to say, I wont use it anymore as a lit magnifier.
Good package and price
March 3, 2013
Quick shipment. Tried to replace the tip and broke the heating element putting the tip on. Turns out the inside of the tip, had a lip I guess where it joins
and this prevented it from sliding on. Replacing the element was quite simple. I ordered a pack of elements from their site and it arrived promptly. Would have
been nice to receive a notice of the shipment.

Messed around with the iron for a few seconds to make sure it works. Pity I could not use it for a preamp kit I was building - did not want to mess with this
whilst i had a project underway.

Magnified light is a nice add-on and has helped me identify bad solder joints - only wish it had better magnification, but still good for price.

Array of tips are sure to please....BUT watch out for those tips that have not been assembled properly.
Excellent customer service
October 17, 2012
I got mine broken out of the padded carton box.
It seems that it was sent broken.
Lamp looked like a used one right out of box.

Update: October 31, 2012
Saying all this, I had experienced outstanding customer service that contacted me in a day sending me new items even without forcing me to send back defective items.
New items arrived perfectly and work fine.
Will update.

Three Star Reviews:

1%
"Looks like a toy!"
April 4, 2017
Feedback to the manufacturer: Weller stuff looks like old-school manly equipment, some of it still made in Germany. Light blue / black color scheme with great looking enclosures.My 6-year says this Hakko unit "Looks like a toy!" And so it does. Hakko, why de-value your product with wacky industrial design? Blue and yellow are your colors, that's fine, but what's with the melted electric pencil sharpener shape? I'm resisting buying this item because I really don't want to see it on my bench. Just sayin . . .
Three Stars
December 10, 2014
Bought for a friend he's OK with it.
data
October 6, 2013
This is a comment of the amazon ad, not the product: Why force a customer to search for basic data?Googling 'Hakko fx888D I find that leaving off the 23YB gets a silver unit, not blue and yellow.If you Google 'hakko FX-888D it will take you to the hakko web site where you can download the instruction manual or try this, replacing the word dot with a dot: doc dot hakko dot com/download dot php?_gs=on&l=en&kp=**ranking**&d=3316.The device does not have a 'down' button for temp adjustment. Essentially, the device allows you to step thru five preset temps, then fine tune them by selecting a digit position and scrolling up, then enter again to set the digit and move to the next position.
5%
Medium duty hobby tool.
July 18, 2017
Not bad, worked solidly for about 4 years. Had to replace the heater. Eventually the handle nut cracked rendering it unusable. Iron stand is nice and stable. Adequate for moderate use. Lamp is garbage out of the box. Price seems fair.
Light failed on first use. Accessories provided are worthless ...
March 29, 2015
Light failed on first use. Accessories provided are worthless, but actual soldiering iron works well for price.
Its decent.
November 16, 2014
The manufacturing/components/materials feel cheap. The tips and accessories are nice, however, the lamp base connection is a poor design and broke before/during first use. It will have to be fixed/remounted, but the light, magnifying glass and even the goose-neck work fine! I wouldn't expect too much out of this, but it will do the job nevertheless.
Product OK
June 26, 2014
Lamp is too short to help much. Solder gun was good. Alot of extra tips. Liked the gun didn't like the Holster. Was poor fitting and broke the tip. Problem was my solder gun was broke so I had to get a different one to repair.
It is working at least
February 2, 2014
It is working. However, the temperature might not be correct - if I set at 250, the solder could not melt 225 degree stuff. I had to set temperature 30 degrees higher but I am not sure what is exactly the temperature any more.

Two Star Reviews:

1%
Failed after 4 months use
March 23, 2017
Worked great for the first few months of light use. Seems to be a legitimate Hakko. Build quality seemed great. Unfortunately it shut itself off while soldering some components and is completely dead and wont even turn on. The fuse is still fine. Power switch is not faulty. Power cord checks out. I am more than a little disappointed given the rave reviews. This failure could be a fluke with my device given Hakko's reputation so I am not one staring this failure. Would love to see some resolution to fix it though
Great Iron. Bad interface. It ruins the whole tool.
March 29, 2016
I love the iron, it's small and works great for dexterity. BUT, the interface is terrible! The UP/ Hold? enter Bull$*** is totally annoying- Literally Nothing in the universe of gadgets/buttons/menu controls has been this archaic since the 1990's. I'd rather use my old Weller.Gimme a simple dial with a temp gauge.
greatly over rated and over priced product
November 11, 2014
The method for changing temps is altogether impossible. Instructions spend a great deal of ink on how to change presetprograms. This model does not have multiple presets though I had to discover that by trying to follow the directions andpreset some high and some low. That feature does not exist and resetting the current temp requires magic.I fiddled for an hour today to raise it from 650F to 725F. I had to get out an old station that I thought was to be made obsolete by a Hakko! HA!
Usability Issue: Iron and Station
February 3, 2014
This is my first time using a Hakko product, and I have to say that I am most dissatisfied with it, especially after reading all the good reviews before buying the unit. Why is the tip to grip distance so long? To be fair this is not a problem with only the Hakko iron as other irons have about the same 1:1 size ratio of metal shaft to rubber and plastic. The first and second time I used this iron it burned my fingers as I would find my fingers slipping over the rubber piece onto the hot plastic piece (the ring with ridges) near the metal shaft. If you were designing any soldering iron, common sense would tell you to design it so that it is held more like a pencil with your fingers closer to the tip. Holding the iron in this manner would allow you better stability and control while using it. Consider this. No one writes with a pencil by holding it in the middle, or near the eraser. You control the quality of your handwriting by keeping your fingers closer to the pencil's tip, likewise, the quality of your soldering job by holding the iron closer to the tip. I guess engineering school does not teach common sense.Another irritating feature of this unit is the digital interface. The engineer who designed this interface needs to have his brain examined. The unit has only two buttons, up and enter. There is no down button. Trying to set the temperature by simply using the up button does not work. You have to scratch your head, or read the manual to figure out how to change the temperature. This should be as easy as pressing a button, but it is not. Overall the quality of construction is good, but the digital interface and the pencil surely disappoint. For me this unit, the FX-888D, fails when it comes to usability, hence the rating of only two stars. I place the fair market value of this unit at around $60 (my special price for this current economic climate). Let's get it there. I returned mine to Amazon for a refund. Sorry about being long-winded and not curt on this one.
5%
Not the best.
June 19, 2016
I would have rated it better, but the tips that came with it ruined one of the heating elements that it had. After replacing the heating element it didn't heat up properly. I assumed I put the heating element and tip together improperly but after disassembling it and reassembling it again it started to overhead the plastic and ruined the whole plug of the unit.
Dangerous Solder Station For Components!
March 23, 2016
This station started out working well. It heats up very quickly and functions decently with the exception of one problem. After a few months of usage, it has begun applying voltage to anything that comes in contact with the tip and has begun blowing up sensitive devices such as microchips and led's. Not a recommended buy.
SHORT LIFE - CONSIDER IT A DISPOSABLE ITEM
March 21, 2016
Good when new, but they don't last LONG! I use mine about once a month for a couple of hours at a time. It lasted just long enough to get past the warranty period. I won't be buying another one!!

I loved the instant heating, and it was good while it lasted, but consider it disposable.
Save your money buy a good one.
September 10, 2015
I've had this soldering iron for almost two years. When I first got I loved it but more recently I've wanted to smash it. If your using 60/40 you should be ok but lead free forget it you'll fight it the whole way. I use bernzomatic electrical solder which I will be changing to something different once it's gone. The handle is junk if you put any pressure on it it comes apart at the base of the handle my fix was plumbers tape it works ok now. I just got a 936 hakko and it's world's better.
Yeah, just don't
August 5, 2014
I don't know if maybe just the one I received is defective since I've had numerous problems with it. The handgrip portion gets hot after a while even at 75%. The heating element doesn't seem to be spaced right and doesn't seat right within the tube under the hot tip. Both heating elements stopped heating to the expected max hours after use. I can barely reheat a soldered component hot enough to remove it from a board. the tip just doesn't get hot enough due to before mentioned problem where the hot end doesn't get hot enough. I really should have become aware of it sooner but this is my first bench soldering iron and definitely the last x-tronic.

One Star Reviews:

3%
not a good product at all 👎🏽
January 31, 2017
Stop working few days after delivering, not a good product at all 👎🏽
This instrument is not made in Japan Buyers do not ...
June 18, 2016
This instrument is not made in Japan Buyers do not get fooled??? Yes even though it's detail says made in Japan. It is made in Malaysia , and other plastic component is made in China.
If you read the reviews lots of people like these units
January 11, 2016
If you read the reviews lots of people like these units. I honestly wish I had the same experience. I have NEVER seen a more wretched soldering iron in my life. My central issue is with the heating element. I have killed three. The last heating element had 5 hours on it maximum. In all cases I used standard Hakko branded soldering tips and replacement parts. I followed the instructions for care maintenance and operation right out of the manual. I nursed and babied these irons and still the heater elements died and the last one in 5 hours or less. With that experience how would anyone want to give this a positive rating. Another area of concern GREAT CONCERN is the warranty or general lack thereof. I searched high and low on the Hakko site and online as well as in the pdf version of the manual... not a word about a warranty. Oh yeah these guys will be happy to "fix" your iron but they will charge you for it... Frankly guys I have sunk enough money into this turd I will happily go back to my Weller a unit that gave me service for ten years without complaint the only thing it doesn't have is a digital display... BUT AT LEAST IT WORKS.
I have to say that this is a crappy made product as the tips rarely got hot enough ...
December 15, 2015
I'm a hobby enthusiast and in need of a real solid working soldering gun. After reading so many positive reviews, I thought I had found a winner.After using it for few months, I have to say that this is a crappy made product as the tips rarely got hot enough to solder anything. Seems that this machine has a mind of it's own as the heating element worked well enough on few occasions. I've done factory resets, cleaned it, and used different tips to no avail...It worked well for few weeks but after using it only few times a month, unit no longer has enough heat to solder anything. Just frustrated... It's 2.30 in the morning and just wished that I had gone with Weller instead.I would really like to hear back from all the positive reviewers. Is yours still working??? Probably not.. :(
One Star
November 2, 2015
Knock off
Love it! This product is awesome
October 17, 2015
Love it! This product is awesome! Very well made and comes to temperature very quickly. I would love for the power cable to be a bit longer but other than that I've very satisfied.UPDATE 11-09-15: After using a few times, I can't get this thing to heat up enough to even finish my project (crossover circuit) for a two way speaker! It worked fine the first week I used it which was like 3 times of maybe a total run time of hour and half max (probably even exaggerating it). Second week I get home from work turn it on while I take out my work cloths (even knowing it heats up quick) I get right into trying to solder some components for my two way crossover and can't even get it hot enough to melt the solder!!!!!! So disappointing.... I tried changing tips, cleaning the tips, checking the pen area to see if there maybe have been loose wire or connections that got undone..... Nothing all normal. Through it's at 750 degrees according to the digital temp gauge it can't even melt the solder!!!!! I take my cheap weller SP40L soldering iron and does circles around this thing... I'll try to get a refund or a replacement. I liked it well on the first several times I used it but now it's worthtless to me! Changing it from a 5 star to a 1 star. I'd give it zero star because I'm so pissed off about it not working in such a short period but there's no option for a no star review..... Will update again when and if I get respond for a replacement as I am willing to give this product 1 more chance due to it's review ratings by other users. Maybe I just get unlucky with a faulty device....UPDATE 2:Received Email from seller (seller is TEquipment - Amazon Marketplace) November 10, 2015 ---> Good Afternoon Victor,Thank you for your email. We apologize that you are having this problem. I would advise you to contact tech support at Hakko to see if they can troubleshoot this for you. You can contact them at 661-294-0090. If they tell you that the unit is defective, please contact us at 732-222-7077 so that we can handle your return. We would need the name of the person you spoke to at Hakko. Please let us know if you need further assistance.Thank you and have a great day!Regards,Customer ServiceUPDATE 3: called Hakko tech support in California then with vacation and holidays I finally emailed back seller December 30, 2015 --->Hi,Sorry I was away on vacation and along with the holidays things been a bit hectic. Anyhow after I spoke with someone from Hakko (California) and did walked me through doing factory reset and have tried it several times, the product is still not even close to temperature range it's suppose to be. I've set it for the highest temperature ratings and even with the factory reset of the device I'm still not able to gain use of the device. It's basically as good as a very expensive paper weight at this point.... I'm very disappointed seeing as how I've even gone as far as buying other tips for it and after my initial use of the product it worked really well. I wrote down the name of the customer service rep I spoke with in California but I misplaced it somewhere. When I find the name I will sure to get back to you. Please advice on what can be done to resolve this issue at this point in time.Thanks, VictorUpdate 4: Seller respond to email same day --------> Good Morning Victor,Thank you for your email. Unfortunately we are outside of the 75 day return window. This would have to be handled as a warranty issue at this point. You would have to contact the manufacturer directly to initiate a warranty claim. Their number is 661-294-0090. Please let us know if you need further assistance.Thank you and have a great day!Regards,Customer ServiceUpdate 5: My response to the seller same day ----> So basically you're telling me that even if this was initiated well before the 75 days that I made known to you folks that the device I received from you folks was a defective one you now are telling me you won't honor a refund and or exchange????! Instead of having to just refund or exchanged it from the get go when you folks were made aware? Instead I was told by you folks to go and talk to Hakko USA first in which I did out of my own time for some worthless $90+ paperweight? I live in Hawaii and California is 3 hours ahead of me. Which means I had to wake up extra early before I head to work to speak with tech support and tinker around with the defective device that you folks sold me because I get off at 4pm and with traffic I can't make it home till 5 or 6pm which California tech support is well closed by the time I even clock out of work! And by the way the tech support person I spoke to was named Natalie with Hakko California. Not that it really matters but I did find where i notated her name. I spoke with her twice.
8%
After purchasing & replacing removable pencil iron, the unit works as advertised. The heating element was bad.
June 10, 2015
I bought this item in December of 2013, I used it recently on a kit and got erratic temperature readings and then a code S-E or 5-E. I should have tried it out when I bought it. The item only had a 1 year warranty. Buy with caution.
** DON"T BUY THIS PRODUCT** Burned out!
May 24, 2015
** DON"T BUY THIS PRODUCT***Bought this in Dec 21013 and haven't had a need to use it yet until now. Went to use it and it burned out before it even got hot enough to do anything. It smells bad (at the base) and gave an error message of E5.It looks like a great kit, but its deceiving. Now its past the warranty to return it. I thought I was buying a decent product since there are plenty of good reviews, but all the 1 star reviews are right on the money and know I have the same issues. SUPER BUMMED OUT. I will never order from this company again.
Out of the box the iron felt like a flimsy piece of plastic and the screw on ...
February 1, 2015
This thing is not worth the money. Out of the box the iron felt like a flimsy piece of plastic and the screw on tip flexed with pressure?! After heating up I don't think the temperature gauge was correct because it was not able to melt solder that should have been easy. The solder wand holder is a piece of cheap junk and flops around with no weight or stability. The magnifying glass is a cheap piece of scratched plastic and basically unusable for magnification. The replacement tips seemed ok but most of them are useless since the tips are too small to properly transfer heat. There is no reason EVER to buy this thing over a comparable Hakko in its price range. Which is exactly what I did and the Hakko is a dream.
Unit was Doa on arrival
May 22, 2014
The unit was dead on arrival, didnt heat up and I was charged 17.90 restocking fee for sending it back . I will never order from these people again. U suck
Would not buy again
March 26, 2014
I've had it for 6 months. Worked great until it didn't. Called customer service, they said to replace the heating element--the one that has to be soldered to replace. So I bought a cheap iron at Walmart tried my best to replace the element on the circuit board (off which I have no experience working on, I work on guitars). Replaced it, still didn't work, it's $15 to send to them, plus shipping to get it there. Between the hassle & cost of shipping it, possible having to buy and replace the heating element again is 6 months, I'm already close to half the cost of a new Weller. And that is where my money is going to go. But, not until the Walmart unit dies. I swear it worked as well for my applications as the Xtronic did, only not as comfortable to hold and it doesn't have changeable tips -- however, when the $10 iron dies, I won't be nearly as upset as throwing $90 down the hole for Xtronic.
Vote for Me
Vote for Me
Pricing info
Old Price
Old Price
$129.90
Price
Price
$96.72updated: Dec 14, 2018
$69.80updated: Dec 14, 2018
Features
Answered Questions
Answered Questions
Article Number
Article Number
4962615039508
0892198000227
Binding
Binding
Misc.
Misc.
Brand
Brand
Hakko
X-TRONIC
Color
Color
-
BLACK
Currency
Currency
USD
USD
Formatted Price
Formatted Price
$185.76
$159.80
Height
Height
393.7 in
196.8 in
Length
Length
393.7 in
236.2 in
Manufacturer
Manufacturer
Hakko Soldering
X-TRONIC INTERNATIONAL, INC.
Model
Model
FX-888D
X-TRONIC #4010
MPN
MPN
FX888D
XT-4010-SS
Number of Items
Number of Items
1
-
Number of Parts
Number of Parts
FX888D
XT-4010-SS
Product Group
Product Group
Home Improvement
Home Improvement
Product Type
Product Type
TOOLS
TOOLS
Publisher
Publisher
Hakko Soldering
X-TRONIC INTERNATIONAL, INC.
Quantity
Quantity
1
1
Reviews
Reviews
Score
Score
9.6
8.2
Studio
Studio
Hakko Soldering
X-TRONIC INTERNATIONAL, INC.
Weight
Weight
9.2 oz
23.6 oz
Width
Width
275.6 in
236.2 in
Feature
Feature

X-TRONIC MODEL #4010 "ESD SAFE" DIGITAL SOLDERING STATION WITH SOLDERING IRON & STAND & MANY EXTRAS

SAMSUNG MICROCOMPUTER PROCESSOR - INCLUDES 10 SOLDERING TIPS - EXTRA HEATING ELEMENT - S/S TWEEZERS

SOLDERING IRON: 60 WATTS - TEMP RANGE: 200 - 480 DEGREES CENTIGRADE - OUTPUT VOLTAGE: 24V/AC

"PLUS"...Receive an X-Tronic MAGNIFYING GOOSENECK FLOURESCENT LAMP ($39.95 Value) "FREE"!!!

100% - 1 YEAR FIX/REPLACE GUARANTEE SHIPPED FROM X-TRONIC INTERNATIONAL, INC. - LINCOLN, NE

Sorry, there's no review at this time. Try changing the filter or leaving one.
Share your opinion
User Rating
Post Review
Please enter captcha code
captcha
Send