Side by Side Comparison of: Bottle Cap Co. vs Beadaholique

This is one of the best little tools in my tool stash! I love it!

Very good. I even open holes in my watches

great quality

Very Pleased

Before buying this My Mother In Law was hammering in holes by hand & said it was so hard & she would ruin some of them & her hand would hurt… So, when she said that this was something she'd like to purchase someday… My young daughter & I knew this would be great!She is so happy! & Says this makes it sooooo easy!A great buy!

I wanted to make something for my sons birthday party. I was going to have my husband drill holes in the bottle caps then as I was looking at something else I saw this tool. I'm so glad I did. It works great. It is very easy and super fast to use. Now I want to make bottle caps for everything and everyone!!!!

I bought these to use as lacquer color identifiers. I store my lacquers in a travel case, and only the tops of the bottle are visible. I stuck one of these on each of the bottles after I painted 2 coats of lacquer on (and let it dry). Now I can see which color I'm picking up without having to pull every single bottle of lacquer out of my case.Note: I used these on Jamberry lacquer bottles and they fit perfectly! If you're wanting to use them with other brands, check the size first.

These Epoxy stickers are great! They fit nicely in the bottle caps. I received them on time and the packaging was neat. The adhesive on the stickers holds well. I posted a picture of the sticker on my finger but that ended up leaving a fingerprint. Luckily, it wasn't noticeable in my paper craft project. They're so fun to use, I can't wait to experiment what else I can use them on.

Item arrived on time and worked perfectly for the project we were completing.

Used these in a project for a family reunion, very easy to use and looks great.

These stickers are just as good as the big name brand and they don't fall off like some do. Great value for a popular craft item.I've bought these a couple of times already.

I bought these to make bottlecap necklaces. These went over the 1 inch round labels that I used to print on and make the center. These are very cute. It definitely does not make them waterproof although that was never my intention. If you're looking for something to make it waterproof and actually protect the label I don't think there is anything that's possible. Please just make it look finished and will protect the label from normal wear. I love these!

Good made product

Before using this bottle cap hole puncher, I did not think it would be all that easy. I actually thought that it would prove to be a challenge to punch a hole into the cap especially with my pre-arthritic hands. I was proven very wrong. I had purchased it to punch the holes for some bottle cap necklace charms that some kindergarteners and I would be crafting. I had to punch over 25 holes and the first punch was as easy as the last. My hand did not cramp up once while using it.

Hope they work haven't received my bottle caps yet!

This product is one of the better bottlecap punchers that I have used. Others I have used did not remove the metal completely and so a piece of sharp metal was stuck to it. This puncher took it completely off, so I would recommend this product that anyone that needs to punch metal.

Makes my apple watch work with my wrist tattoos! Totally the intended purpose, right?

They didn't quite cover the entire image, which was a bit disappointing. But other than that they worked as expected.

These were clean (no dirt underneath) and were protected with a clear sheet on top of each page of 25. They were a perfect fit to the Martha Stewart 1" punch I have.My only disappointment was that they are a soft and very flexible epoxy sticker, versus some of the other brands I have bought in the past that are firm and not pliable at all.Overall, they met my needs, and were a good price - but I will search for a firmer one next time.Arrived very quickly and in excellent condition.

great stickers but some of mine had some sort of streaks and weren't clear so they got tossed

This is a great bargin. Good quality products. These are fun for card making, scrapbooking, bottle cap projects. They are crystal clear. I have found that once you start making these, you just want to keep going, so it's good to have a large quantity on hand. The only thing I would like better is if they were not flexable. They are not hard, there is just a little flexability to them. Not a big deal though. Still well worth the price.

I've used these before, but for some reason this batch was a little too hard. Most of the stickers were really hard and not easy to press onto the images I used. Usually epoxy stickers are rather flexible, at least the ones I've purchased on Amazon and at craft stores. There were maybe 10 flexible stickers in this pack. The harder epoxy stickers also appeared to have lines in them that didn't buff out. Not sure if this batch was affected by the extreme heat here in Texas during its transit to my mail box or if it was just a manufacturing fluke. I will continue to order them because the price is good, but I hope the next batch is more flexible.

This product came quickly and was easy to use, but did not meet my needs. It very clearly is made for standard bottle caps and not the flattened type in craft jewelry supply, which I prefer. Perhaps the ad should make this caveat? I still need to use drill or buy caps with jump ring already attached.

I don't know if is the material I'm working with, but, they make a perfect clean hole, leave the piece of the metal hanging out the hole. Hope is just the king of metal and not the pliers.

I'm a little disappointed with the blurriness that the glue adds to the image. I was expecting some distortion from the shape, but not the smudginess from the sticky bit.

Used these in a project and they looked great...but two days later the stickers were lifting up and peeling away already. Thankfully they peeled off cleanly so I could go in another direction with my project, but not what I was hoping for.

These stick well, but they are not as clear/see through as the picture shows. They have somewhat of a yellow tint to them. Pretty disappointed with that.

The stickers are ok. Some of them have markings on them which means I can't use them. If you put them on the image you can see a line or a smuge. Out of 100 i can prob only use about 60 of them.

These are very expensive if you don't mind the shipping time. Initially I was very pleased, however, after about 9 months, they yellow.

Just getting into the bottle cap hobby and this is the second purchase of epoxy domes I've made but the first from Beadaholique. I found these epoxy stickers to be very thin. Not much of a dome effect. Also, in comparison to the others I've bought, I find them to have a slight tinge of yellowing, not crystal clear.

Product states the hole can be punched to make necklaces and keychains, etc. The hole is not large enough even for a small split ring to use as a keyring. If you get the keyring on it cannot be turned because the hole will not accommodate more than one thickness of the splitting, so where the split ring overlaps - which is almost the entire ring - the bottle cap cannot move or slide. Narrow cording, not even ribbon, would have to be used to make a necklace unless you use a jump ring. Again you are limited by the size of the hole. DON'T BE FOOLED !!!!!

Wish I had listened to the other reviews ! These had a yellow tint, were slightly smaller than 1" and somewhat brittle. I've ordered these from another seller but they were out of stock so I was desperate ! Never again...

Horrible bubbly residue on the "sticker" side. You can see it even on very light images/white background.

Did not fit properly into 1" pendant trays, slightly too big. Very thin,low dome with no magnifying effect.

These don' t stay stuck on the top of bottle caps - they are not pliable enough and lift-up on the edges after a short time. I didn't see earlier mention of this issue. I'll try someone's suggestion to apply to image and add glue on t he back of image. These are only good for use on flat sufaces - not good for bottle caps with slight rounded edges. Disappointed.

The 40 that worked were good; however, 60 (that's more than half) went cloudy and obscured the picture underneath in the area I glued them to the bottle cap. Would not recommend these for use with E6000 glue. I ordered some more, but will probably return them.

Although they stick well, they are very, very yellow. I've been looking for the perfect epoxy domes and I am disappointed with these. If they were only clear!!! Sad.

i had returned it. price to high for this small piece

i needed holes in the middle of my bottle caps & this is too short so im using a nail & hammer to get it right

These are NOT clear as pictured. They are all yellow and hard. They are either extremely old or made with poor quality materials. If I put them on anything with white in it, it turns the white to yellow. TERRIBLE!

All the Epoxy stickers were yellow as if they were old and scratched up. This product is also not eligible for returns! I am not happy with this product and seller.

Very disappointed in the quality of this product. They are not clear. They are a yellowish color and more than 1/2 of them came scratched up. Definitely a waste of money since I can't use them for what I intended.

I am extremely disappointed with this product! I am not sure if it is just a poor product or that the problem was that it arrived hot from heat in the UPS truck which may have caused this defect. More than half of the Epoxy stickers are unusable. They have smudges and bubble marks which show through when placed over images.

I doubt these are from beadaholique. They shipped from Hong Kong and had brown yellow stuff all over almost like pee. Had a horrible smell to them. I watch the tutorials beadaholique has a YouTube and they look nothin like the ones they use in the vids. I don't know about the sticky ness most are saying they don't stick so we shall see but ima be very careful when I buy again

I purchased some awesome epoxy bottle cap circles at hobby lobby. They were a self sticking hard circle. I was excited to see what I thought was a huge batch of them on amazon. These arrived gummy and bendable. I would have NEVER ordered these. Order with caution.I like to stick two back to back with a picture of some sort between, drill a very small hole, slide a small ring through and make custom necklaces for my daughter. You can NOT drill through this because of the gummy, NOSOLID consistency.